gpio: 104-idi-48: Use devm_request_region

By the time request_region is called in the ACCES 104-IDI-48 GPIO
driver, a corresponding device structure has already been allocated. The
devm_request_region function should be used to help simplify the cleanup
code and reduce the possible points of failure.

Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

diff --git a/drivers/gpio/gpio-104-idi-48.c b/drivers/gpio/gpio-104-idi-48.c
index 49b1188d1b16dce900439c88013209acb8c1bde0..e37cd4cdda357b865b05511d4be751d2d9505002 100644 (file)
--- a/drivers/gpio/gpio-104-idi-48.c
+++ b/drivers/gpio/gpio-104-idi-48.c
@@ -39,7 +39,6 @@ MODULE_PARM_DESC(idi_48_irq, "ACCES 104-IDI-48 interrupt line number");
  * @ack_lock:  synchronization lock to prevent IRQ handler race conditions
  * @irq_mask:  input bits affected by interrupts
  * @base:      base port address of the GPIO device
- * @extent:    extent of port address region of the GPIO device
  * @irq:       Interrupt line number
  * @cos_enb:   Change-Of-State IRQ enable boundaries mask
  */
@@ -49,7 +48,6 @@ struct idi_48_gpio {
        spinlock_t ack_lock;
        unsigned char irq_mask[6];
        unsigned base;
-       unsigned extent;
        unsigned irq;
        unsigned char cos_enb;
 };
@@ -227,11 +225,10 @@ static int __init idi_48_probe(struct platform_device *pdev)
        if (!idi48gpio)
                return -ENOMEM;
 
-       if (!request_region(base, extent, name)) {
-               dev_err(dev, "Unable to lock %s port addresses (0x%X-0x%X)\n",
-                       name, base, base + extent);
-               err = -EBUSY;
-               goto err_lock_io_port;
+       if (!devm_request_region(dev, base, extent, name)) {
+               dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n",
+                       base, base + extent);
+               return -EBUSY;
        }
 
        idi48gpio->chip.label = name;
@@ -243,7 +240,6 @@ static int __init idi_48_probe(struct platform_device *pdev)
        idi48gpio->chip.direction_input = idi_48_gpio_direction_input;
        idi48gpio->chip.get = idi_48_gpio_get;
        idi48gpio->base = base;
-       idi48gpio->extent = extent;
        idi48gpio->irq = irq;
 
        spin_lock_init(&idi48gpio->lock);
@@ -253,7 +249,7 @@ static int __init idi_48_probe(struct platform_device *pdev)
        err = gpiochip_add_data(&idi48gpio->chip, idi48gpio);
        if (err) {
                dev_err(dev, "GPIO registering failed (%d)\n", err);
-               goto err_gpio_register;
+               return err;
        }
 
        /* Disable IRQ by default */
@@ -264,24 +260,20 @@ static int __init idi_48_probe(struct platform_device *pdev)
                handle_edge_irq, IRQ_TYPE_NONE);
        if (err) {
                dev_err(dev, "Could not add irqchip (%d)\n", err);
-               goto err_gpiochip_irqchip_add;
+               goto err_gpiochip_remove;
        }
 
        err = request_irq(irq, idi_48_irq_handler, IRQF_SHARED, name,
                idi48gpio);
        if (err) {
                dev_err(dev, "IRQ handler registering failed (%d)\n", err);
-               goto err_request_irq;
+               goto err_gpiochip_remove;
        }
 
        return 0;
 
-err_request_irq:
-err_gpiochip_irqchip_add:
+err_gpiochip_remove:
        gpiochip_remove(&idi48gpio->chip);
-err_gpio_register:
-       release_region(base, extent);
-err_lock_io_port:
        return err;
 }
 
@@ -291,7 +283,6 @@ static int idi_48_remove(struct platform_device *pdev)
 
        free_irq(idi48gpio->irq, idi48gpio);
        gpiochip_remove(&idi48gpio->chip);
-       release_region(idi48gpio->base, idi48gpio->extent);
 
        return 0;
 }