ARM: dts: stm32: add sai id registers to stm32mp157c

Add identification registers to address range
of SAI DT parent node, for stm32mp157c.

Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi
index e98aad37ff9e133d3a014921cd4f580135648b35..0c4e6ebc35291e8e243c816d0a7631ae1ee8ab9f 100644 (file)
--- a/arch/arm/boot/dts/stm32mp157c.dtsi
+++ b/arch/arm/boot/dts/stm32mp157c.dtsi
@@ -746,7 +746,7 @@
                        #address-cells = <1>;
                        #size-cells = <1>;
                        ranges = <0 0x4400a000 0x400>;
-                       reg = <0x4400a000 0x4>;
+                       reg = <0x4400a000 0x4>, <0x4400a3f0 0x10>;
                        interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
                        resets = <&rcc SAI1_R>;
                        status = "disabled";
@@ -778,7 +778,7 @@
                        #address-cells = <1>;
                        #size-cells = <1>;
                        ranges = <0 0x4400b000 0x400>;
-                       reg = <0x4400b000 0x4>;
+                       reg = <0x4400b000 0x4>, <0x4400b3f0 0x10>;
                        interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
                        resets = <&rcc SAI2_R>;
                        status = "disabled";
@@ -809,7 +809,7 @@
                        #address-cells = <1>;
                        #size-cells = <1>;
                        ranges = <0 0x4400c000 0x400>;
-                       reg = <0x4400c000 0x4>;
+                       reg = <0x4400c000 0x4>, <0x4400c3f0 0x10>;
                        interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
                        resets = <&rcc SAI3_R>;
                        status = "disabled";
@@ -1164,7 +1164,7 @@
                        #address-cells = <1>;
                        #size-cells = <1>;
                        ranges = <0 0x50027000 0x400>;
-                       reg = <0x50027000 0x4>;
+                       reg = <0x50027000 0x4>, <0x500273f0 0x10>;
                        interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
                        resets = <&rcc SAI4_R>;
                        status = "disabled";