amd-xgbe-phy: Updates to KR training initiation

As part of changing rates to KR mode, KR training is initiated. If
the KR training is restarted it is possible to enter an invalid logic
state. This can be avoided by asserting a training reset bit before
initiating the KR training and then clearing the training reset bit.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/phy/amd-xgbe-phy.c b/drivers/net/phy/amd-xgbe-phy.c
index a2d778aefadfe22af51ade4c888275a9980aba56..39428e5a1700cdc5f84963337cd02a5d97263c0e 100644 (file)
--- a/drivers/net/phy/amd-xgbe-phy.c
+++ b/drivers/net/phy/amd-xgbe-phy.c
@@ -119,10 +119,13 @@ MODULE_DESCRIPTION("AMD 10GbE (amd-xgbe) PHY driver");
 #endif
 
 /* SerDes integration register offsets */
+#define SIR0_KR_RT_1                   0x002c
 #define SIR0_STATUS                    0x0040
 #define SIR1_SPEED                     0x0000
 
 /* SerDes integration register entry bit positions and sizes */
+#define SIR0_KR_RT_1_RESET_INDEX       11
+#define SIR0_KR_RT_1_RESET_WIDTH       1
 #define SIR0_STATUS_RX_READY_INDEX     0
 #define SIR0_STATUS_RX_READY_WIDTH     1
 #define SIR0_STATUS_TX_READY_INDEX     8
@@ -636,9 +639,13 @@ static enum amd_xgbe_phy_an amd_xgbe_an_tx_training(struct phy_device *phydev,
        if (ret < 0)
                return AMD_XGBE_AN_ERROR;
 
+       XSIR0_IOWRITE_BITS(priv, SIR0_KR_RT_1, RESET, 1);
+
        ret |= 0x01;
        phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL, ret);
 
+       XSIR0_IOWRITE_BITS(priv, SIR0_KR_RT_1, RESET, 0);
+
        return AMD_XGBE_AN_EVENT;
 }