dt-bindings: mmc: sdhci-pxa: add state_uhs pinctrl

On the pxav3 controller, increasing the drive strength of the data pins
might be required to maintain stability on fast bus clocks (above 100
MHz). Add a state_uhs pinctrl to allow this.

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
Link: https://lore.kernel.org/r/20250821-pxav3-uhs-v4-1-bb588314f3c3@dujemihanovic.xyz
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

diff --git a/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml b/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml
index e7c06032048a3a73eb3eb67a887e75db273ffa92..fba1cc50fdf07cc25d42f45512c385a9b8207b9b 100644 (file)
--- a/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml
+++ b/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml
@@ -44,12 +44,27 @@ allOf:
           items:
             - const: default
             - const: state_cmd_gpio
-        pinctrl-0:
-          description:
-            Should contain default pinctrl.
+
         pinctrl-1:
           description:
             Should switch CMD pin to GPIO mode as a high output.
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mrvl,pxav3-mmc
+    then:
+      properties:
+        pinctrl-names:
+          description:
+            Optional for increasing stability of the controller at fast bus clocks.
+          items:
+            - const: default
+            - const: state_uhs
+
+        pinctrl-1:
+          description:
+            Should switch the drive strength of the data pins to high.
 
 properties:
   compatible:
@@ -82,6 +97,14 @@ properties:
       - const: io
       - const: core
 
+  pinctrl-names: true
+
+  pinctrl-0:
+    description:
+      Should contain default pinctrl.
+
+  pinctrl-1: true
+
   mrvl,clk-delay-cycles:
     description: Specify a number of cycles to delay for tuning.
     $ref: /schemas/types.yaml#/definitions/uint32