mutex_unlock(&zonelists_mutex);
}
-/*
- * The inactive anon list should be small enough that the VM never has to
- * do too much work, but large enough that each inactive page has a chance
- * to be referenced again before it is swapped out.
- *
- * The inactive_anon ratio is the target ratio of ACTIVE_ANON to
- * INACTIVE_ANON pages on this zone's LRU, maintained by the
- * pageout code. A zone->inactive_ratio of 3 means 3:1 or 25% of
- * the anonymous pages are kept on the inactive list.
- *
- * total target max
- * memory ratio inactive anon
- * -------------------------------------
- * 10MB 1 5MB
- * 100MB 1 50MB
- * 1GB 3 250MB
- * 10GB 10 0.9GB
- * 100GB 31 3GB
- * 1TB 101 10GB
- * 10TB 320 32GB
- */
-static void __meminit calculate_zone_inactive_ratio(struct zone *zone)
-{
- unsigned int gb, ratio;
-
- /* Zone size in gigabytes */
- gb = zone->managed_pages >> (30 - PAGE_SHIFT);
- if (gb)
- ratio = int_sqrt(10 * gb);
- else
- ratio = 1;
-
- zone->inactive_ratio = ratio;
-}
-
-static void __meminit setup_per_zone_inactive_ratio(void)
-{
- struct zone *zone;
-
- for_each_zone(zone)
- calculate_zone_inactive_ratio(zone);
-}
-
/*
* Initialise min_free_kbytes.
*
setup_per_zone_wmarks();
refresh_zone_stat_thresholds();
setup_per_zone_lowmem_reserve();
- setup_per_zone_inactive_ratio();
return 0;
}
core_initcall(init_per_zone_wmark_min)
free_hot_cold_page_list(&l_hold, true);
}
-#ifdef CONFIG_SWAP
-static bool inactive_anon_is_low_global(struct zone *zone)
-{
- unsigned long active, inactive;
-
- active = zone_page_state(zone, NR_ACTIVE_ANON);
- inactive = zone_page_state(zone, NR_INACTIVE_ANON);
-
- return inactive * zone->inactive_ratio < active;
-}
-
-/**
- * inactive_anon_is_low - check if anonymous pages need to be deactivated
- * @lruvec: LRU vector to check
+/*
+ * The inactive anon list should be small enough that the VM never has
+ * to do too much work.
*
- * Returns true if the zone does not have enough inactive anon pages,
- * meaning some active anon pages need to be deactivated.
- */
-static bool inactive_anon_is_low(struct lruvec *lruvec)
-{
- /*
- * If we don't have swap space, anonymous page deactivation
- * is pointless.
- */
- if (!total_swap_pages)
- return false;
-
- if (!mem_cgroup_disabled())
- return mem_cgroup_inactive_anon_is_low(lruvec);
-
- return inactive_anon_is_low_global(lruvec_zone(lruvec));
-}
-#else
-static inline bool inactive_anon_is_low(struct lruvec *lruvec)
-{
- return false;
-}
-#endif
-
-/**
- * inactive_file_is_low - check if file pages need to be deactivated
- * @lruvec: LRU vector to check
+ * The inactive file list should be small enough to leave most memory
+ * to the established workingset on the scan-resistant active list,
+ * but large enough to avoid thrashing the aggregate readahead window.
*
- * When the system is doing streaming IO, memory pressure here
- * ensures that active file pages get deactivated, until more
- * than half of the file pages are on the inactive list.
+ * Both inactive lists should also be large enough that each inactive
+ * page has a chance to be referenced again before it is reclaimed.
*
- * Once we get to that situation, protect the system's working
- * set from being evicted by disabling active file page aging.
+ * The inactive_ratio is the target ratio of ACTIVE to INACTIVE pages
+ * on this LRU, maintained by the pageout code. A zone->inactive_ratio
+ * of 3 means 3:1 or 25% of the pages are kept on the inactive list.
*
- * This uses a different ratio than the anonymous pages, because
- * the page cache uses a use-once replacement algorithm.
+ * total target max
+ * memory ratio inactive
+ * -------------------------------------
+ * 10MB 1 5MB
+ * 100MB 1 50MB
+ * 1GB 3 250MB
+ * 10GB 10 0.9GB
+ * 100GB 31 3GB
+ * 1TB 101 10GB
+ * 10TB 320 32GB
*/
-static bool inactive_file_is_low(struct lruvec *lruvec)
+static bool inactive_list_is_low(struct lruvec *lruvec, bool file)
{
+ unsigned long inactive_ratio;
unsigned long inactive;
unsigned long active;
+ unsigned long gb;
- inactive = lruvec_lru_size(lruvec, LRU_INACTIVE_FILE);
- active = lruvec_lru_size(lruvec, LRU_ACTIVE_FILE);
+ /*
+ * If we don't have swap space, anonymous page deactivation
+ * is pointless.
+ */
+ if (!file && !total_swap_pages)
+ return false;
- return active > inactive;
-}
+ inactive = lruvec_lru_size(lruvec, file * LRU_FILE);
+ active = lruvec_lru_size(lruvec, file * LRU_FILE + LRU_ACTIVE);
-static bool inactive_list_is_low(struct lruvec *lruvec, enum lru_list lru)
-{
- if (is_file_lru(lru))
- return inactive_file_is_low(lruvec);
+ gb = (inactive + active) >> (30 - PAGE_SHIFT);
+ if (gb)
+ inactive_ratio = int_sqrt(10 * gb);
else
- return inactive_anon_is_low(lruvec);
+ inactive_ratio = 1;
+
+ return inactive * inactive_ratio < active;
}
static unsigned long shrink_list(enum lru_list lru, unsigned long nr_to_scan,
struct lruvec *lruvec, struct scan_control *sc)
{
if (is_active_lru(lru)) {
- if (inactive_list_is_low(lruvec, lru))
+ if (inactive_list_is_low(lruvec, is_file_lru(lru)))
shrink_active_list(nr_to_scan, lruvec, sc, lru);
return 0;
}
* lruvec even if it has plenty of old anonymous pages unless the
* system is under heavy pressure.
*/
- if (!inactive_file_is_low(lruvec) &&
+ if (!inactive_list_is_low(lruvec, true) &&
lruvec_lru_size(lruvec, LRU_INACTIVE_FILE) >> sc->priority) {
scan_balance = SCAN_FILE;
goto out;
* Even if we did not try to evict anon pages at all, we want to
* rebalance the anon lru active/inactive ratio.
*/
- if (inactive_anon_is_low(lruvec))
+ if (inactive_list_is_low(lruvec, false))
shrink_active_list(SWAP_CLUSTER_MAX, lruvec,
sc, LRU_ACTIVE_ANON);
do {
struct lruvec *lruvec = mem_cgroup_zone_lruvec(zone, memcg);
- if (inactive_anon_is_low(lruvec))
+ if (inactive_list_is_low(lruvec, false))
shrink_active_list(SWAP_CLUSTER_MAX, lruvec,
sc, LRU_ACTIVE_ANON);
projects / users / willy / pagecache.git / commitdiff