ncr5380: Replace redundant flags with FLAG_NO_DMA_FIXUP

The flags DMA_WORKS_RIGHT, FLAG_NCR53C400 and FLAG_HAS_LAST_BYTE_SENT
all mean the same thing, i.e. the chip is not a 538[01]. (More recent
devices such as the 53C80 have a 'Last Byte Sent' bit in the Target
Command Register as well as other fixes for End-of-DMA errata.)

These flags have no additional meanings since previous cleanup patches
eliminated the NCR53C400 macro, moved g_NCR5380-specific code out of the
core driver and standardized interrupt handling.

Use the FLAG_NO_DMA_FIXUP flag to suppress End-of-DMA errata workarounds,
for those cards and drivers that make use of the TCR_LAST_BYTE_SENT bit.
Remove the old flags.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index 9c1b69be796c020c416e9c0d4c440dad09c530a3..29cf1ec27ff23a98ccc474b6c16a3f0c7c4aaac8 100644 (file)
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -541,7 +541,7 @@ static void prepare_info(struct Scsi_Host *instance)
                 instance->base, instance->irq,
                 instance->can_queue, instance->cmd_per_lun,
                 instance->sg_tablesize, instance->this_id,
-                hostdata->flags & FLAG_NCR53C400     ? "NCR53C400 "     : "",
+                hostdata->flags & FLAG_NO_DMA_FIXUP  ? "NO_DMA_FIXUP "  : "",
                 hostdata->flags & FLAG_DTC3181E      ? "DTC3181E "      : "",
                 hostdata->flags & FLAG_NO_PSEUDO_DMA ? "NO_PSEUDO_DMA " : "",
                 hostdata->flags & FLAG_TOSHIBA_DELAY ? "TOSHIBA_DELAY "  : "",
@@ -702,6 +702,7 @@ static int NCR5380_init(struct Scsi_Host *instance, int flags)
        hostdata->connected = NULL;
        hostdata->issue_queue = NULL;
        hostdata->disconnected_queue = NULL;
+       hostdata->flags = flags;
        
        INIT_WORK(&hostdata->main_task, NCR5380_main);
        hostdata->work_q = alloc_workqueue("ncr5380_%d",
@@ -710,12 +711,6 @@ static int NCR5380_init(struct Scsi_Host *instance, int flags)
        if (!hostdata->work_q)
                return -ENOMEM;
 
-       /* The CHECK code seems to break the 53C400. Will check it later maybe */
-       if (flags & FLAG_NCR53C400)
-               hostdata->flags = FLAG_HAS_LAST_BYTE_SENT | flags;
-       else
-               hostdata->flags = FLAG_CHECK_LAST_BYTE_SENT | flags;
-
        hostdata->host = instance;
 
        prepare_info(instance);
@@ -1614,7 +1609,7 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance, unsigned char *phase
         * before the setting of DMA mode to after transfer of the last byte.
         */
 
-       if (hostdata->flags & FLAG_NCR53C400)
+       if (hostdata->flags & FLAG_NO_DMA_FIXUP)
                NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_MONITOR_BSY |
                                        MR_ENABLE_EOP_INTR);
        else
@@ -1734,14 +1729,9 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance, unsigned char *phase
        return 0;
 #else                          /* defined(REAL_DMA_POLL) */
        if (p & SR_IO) {
-#ifdef DMA_WORKS_RIGHT
-               foo = NCR5380_pread(instance, d, c);
-#else
-               int diff = 1;
-               if (hostdata->flags & FLAG_NCR53C400) {
-                       diff = 0;
-               }
-               if (!(foo = NCR5380_pread(instance, d, c - diff))) {
+               foo = NCR5380_pread(instance, d,
+                       hostdata->flags & FLAG_NO_DMA_FIXUP ? c : c - 1);
+               if (!foo && !(hostdata->flags & FLAG_NO_DMA_FIXUP)) {
                        /*
                         * We can't disable DMA mode after successfully transferring 
                         * what we plan to be the last byte, since that would open up
@@ -1764,46 +1754,32 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance, unsigned char *phase
                         * byte.
                         */
 
-                       if (!(hostdata->flags & FLAG_NCR53C400)) {
-                               while (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ));
-                               /* Wait for clean handshake */
-                               while (NCR5380_read(STATUS_REG) & SR_REQ);
-                               d[c - 1] = NCR5380_read(INPUT_DATA_REG);
+                       if (NCR5380_poll_politely(instance, BUS_AND_STATUS_REG,
+                                                 BASR_DRQ, BASR_DRQ, HZ) < 0) {
+                               foo = -1;
+                               shost_printk(KERN_ERR, instance, "PDMA read: DRQ timeout\n");
+                       }
+                       if (NCR5380_poll_politely(instance, STATUS_REG,
+                                                 SR_REQ, 0, HZ) < 0) {
+                               foo = -1;
+                               shost_printk(KERN_ERR, instance, "PDMA read: !REQ timeout\n");
                        }
+                       d[c - 1] = NCR5380_read(INPUT_DATA_REG);
                }
-#endif
        } else {
-#ifdef DMA_WORKS_RIGHT
                foo = NCR5380_pwrite(instance, d, c);
-#else
-               int timeout;
-               dprintk(NDEBUG_C400_PWRITE, "About to pwrite %d bytes\n", c);
-               if (!(foo = NCR5380_pwrite(instance, d, c))) {
+               if (!foo && !(hostdata->flags & FLAG_NO_DMA_FIXUP)) {
                        /*
                         * Wait for the last byte to be sent.  If REQ is being asserted for 
                         * the byte we're interested, we'll ACK it and it will go false.  
                         */
-                       if (!(hostdata->flags & FLAG_HAS_LAST_BYTE_SENT)) {
-                               timeout = 20000;
-                               while (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ) && (NCR5380_read(BUS_AND_STATUS_REG) & BASR_PHASE_MATCH));
-
-                               if (!timeout)
-                                       dprintk(NDEBUG_LAST_BYTE_SENT, "scsi%d : timed out on last byte\n", instance->host_no);
-
-                               if (hostdata->flags & FLAG_CHECK_LAST_BYTE_SENT) {
-                                       hostdata->flags &= ~FLAG_CHECK_LAST_BYTE_SENT;
-                                       if (NCR5380_read(TARGET_COMMAND_REG) & TCR_LAST_BYTE_SENT) {
-                                               hostdata->flags |= FLAG_HAS_LAST_BYTE_SENT;
-                                               dprintk(NDEBUG_LAST_BYTE_SENT, "scsi%d : last byte sent works\n", instance->host_no);
-                                       }
-                               }
-                       } else {
-                               dprintk(NDEBUG_C400_PWRITE, "Waiting for LASTBYTE\n");
-                               while (!(NCR5380_read(TARGET_COMMAND_REG) & TCR_LAST_BYTE_SENT));
-                               dprintk(NDEBUG_C400_PWRITE, "Got LASTBYTE\n");
+                       if (NCR5380_poll_politely2(instance,
+                            BUS_AND_STATUS_REG, BASR_DRQ, BASR_DRQ,
+                            BUS_AND_STATUS_REG, BASR_PHASE_MATCH, 0, HZ) < 0) {
+                               foo = -1;
+                               shost_printk(KERN_ERR, instance, "PDMA write: DRQ and phase timeout\n");
                        }
                }
-#endif
        }
        NCR5380_write(MODE_REG, MR_BASE);
        NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);

diff --git a/drivers/scsi/NCR5380.h b/drivers/scsi/NCR5380.h
index 78af75142342ff390a540fb97d067f2a4ac95300..e8a26eab32dd4a0279f2bc3e0936294e4199d76a 100644 (file)
--- a/drivers/scsi/NCR5380.h
+++ b/drivers/scsi/NCR5380.h
@@ -226,9 +226,7 @@
 #define NO_IRQ         0
 #endif
 
-#define FLAG_HAS_LAST_BYTE_SENT                1       /* NCR53c81 or better */
-#define FLAG_CHECK_LAST_BYTE_SENT      2       /* Only test once */
-#define FLAG_NCR53C400                 4       /* NCR53c400 */
+#define FLAG_NO_DMA_FIXUP              1       /* No DMA errata workarounds */
 #define FLAG_NO_PSEUDO_DMA             8       /* Inhibit DMA */
 #define FLAG_DTC3181E                  16      /* DTC3181E */
 #define FLAG_LATE_DMA_SETUP            32      /* Setup NCR before DMA H/W */

diff --git a/drivers/scsi/dtc.c b/drivers/scsi/dtc.c
index 3af4f69c199c1a71a7fefd774522fe85ce2b3797..1beefdbcbea8c76fdd6304dd074c607e1e521b47 100644 (file)
--- a/drivers/scsi/dtc.c
+++ b/drivers/scsi/dtc.c
@@ -1,7 +1,5 @@
 #define PSEUDO_DMA
 #define DONT_USE_INTR
-#define DMA_WORKS_RIGHT
-
 
 /*
  * DTC 3180/3280 driver, by
@@ -233,7 +231,7 @@ found:
                instance->base = addr;
                ((struct NCR5380_hostdata *)(instance)->hostdata)->base = base;
 
-               if (NCR5380_init(instance, 0))
+               if (NCR5380_init(instance, FLAG_NO_DMA_FIXUP))
                        goto out_unregister;
 
                NCR5380_maybe_reset_bus(instance);

diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c
index 4124f053d1b3e586a153ed05ae98264dc98a6277..e71c796839255526bab41cac9b43d742b53b4f39 100644 (file)
--- a/drivers/scsi/g_NCR5380.c
+++ b/drivers/scsi/g_NCR5380.c
@@ -321,7 +321,7 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
                        break;
                case BOARD_NCR53C400:
 #ifdef PSEUDO_DMA
-                       flags = FLAG_NCR53C400;
+                       flags = FLAG_NO_DMA_FIXUP;
 #endif
                        break;
                case BOARD_NCR53C400A: