ds = dst->cpu_dp->ds;
 
        if (unlikely(!pskb_may_pull(skb, BRCM_TAG_LEN)))
-               goto out_drop;
+               return NULL;
 
        /* skb->data points to the EtherType, the tag is right before it */
        brcm_tag = skb->data - 2;
 
        /* The opcode should never be different than 0b000 */
        if (unlikely((brcm_tag[0] >> BRCM_OPCODE_SHIFT) & BRCM_OPCODE_MASK))
-               goto out_drop;
+               return NULL;
 
        /* We should never see a reserved reason code without knowing how to
         * handle it
         */
        if (unlikely(brcm_tag[2] & BRCM_EG_RC_RSVD))
-               goto out_drop;
+               return NULL;
 
        /* Locate which port this is coming from */
        source_port = brcm_tag[3] & BRCM_EG_PID_MASK;
 
        /* Validate port against switch setup, either the port is totally */
        if (source_port >= ds->num_ports || !ds->ports[source_port].netdev)
-               goto out_drop;
+               return NULL;
 
        /* Remove Broadcom tag and update checksum */
        skb_pull_rcsum(skb, BRCM_TAG_LEN);
        skb->dev = ds->ports[source_port].netdev;
 
        return skb;
-
-out_drop:
-       return NULL;
 }
 
 const struct dsa_device_ops brcm_netdev_ops = {
 
        int source_port;
 
        if (unlikely(!pskb_may_pull(skb, DSA_HLEN)))
-               goto out_drop;
+               return NULL;
 
        /*
         * The ethertype field is part of the DSA header.
         * Check that frame type is either TO_CPU or FORWARD.
         */
        if ((dsa_header[0] & 0xc0) != 0x00 && (dsa_header[0] & 0xc0) != 0xc0)
-               goto out_drop;
+               return NULL;
 
        /*
         * Determine source device and port.
         * port is a registered DSA port.
         */
        if (source_device >= DSA_MAX_SWITCHES)
-               goto out_drop;
+               return NULL;
 
        ds = dst->ds[source_device];
        if (!ds)
-               goto out_drop;
+               return NULL;
 
        if (source_port >= ds->num_ports || !ds->ports[source_port].netdev)
-               goto out_drop;
+               return NULL;
 
        /*
         * Convert the DSA header to an 802.1q header if the 'tagged'
        skb->dev = ds->ports[source_port].netdev;
 
        return skb;
-
-out_drop:
-       return NULL;
 }
 
 const struct dsa_device_ops dsa_netdev_ops = {
 
        int source_port;
 
        if (unlikely(!pskb_may_pull(skb, EDSA_HLEN)))
-               goto out_drop;
+               return NULL;
 
        /*
         * Skip the two null bytes after the ethertype.
         * Check that frame type is either TO_CPU or FORWARD.
         */
        if ((edsa_header[0] & 0xc0) != 0x00 && (edsa_header[0] & 0xc0) != 0xc0)
-               goto out_drop;
+               return NULL;
 
        /*
         * Determine source device and port.
         * port is a registered DSA port.
         */
        if (source_device >= DSA_MAX_SWITCHES)
-               goto out_drop;
+               return NULL;
 
        ds = dst->ds[source_device];
        if (!ds)
-               goto out_drop;
+               return NULL;
 
        if (source_port >= ds->num_ports || !ds->ports[source_port].netdev)
-               goto out_drop;
+               return NULL;
 
        /*
         * If the 'tagged' bit is set, convert the DSA tag to a 802.1q
        skb->dev = ds->ports[source_port].netdev;
 
        return skb;
-
-out_drop:
-       return NULL;
 }
 
 const struct dsa_device_ops edsa_netdev_ops = {
 
        __be16 *phdr, hdr;
 
        if (unlikely(!pskb_may_pull(skb, MTK_HDR_LEN)))
-               goto out_drop;
+               return NULL;
 
        /* The MTK header is added by the switch between src addr
         * and ethertype at this point, skb->data points to 2 bytes
         */
        ds = dst->ds[0];
        if (!ds)
-               goto out_drop;
+               return NULL;
 
        /* Get source port information */
        port = (hdr & MTK_HDR_RECV_SOURCE_PORT_MASK);
        if (!ds->ports[port].netdev)
-               goto out_drop;
+               return NULL;
 
        skb->dev = ds->ports[port].netdev;
 
        return skb;
-
-out_drop:
-       return NULL;
 }
 
 const struct dsa_device_ops mtk_netdev_ops = {
 
        __be16 *phdr, hdr;
 
        if (unlikely(!pskb_may_pull(skb, QCA_HDR_LEN)))
-               goto out_drop;
+               return NULL;
 
        /* The QCA header is added by the switch between src addr and Ethertype
         * At this point, skb->data points to ethertype so header should be
        /* Make sure the version is correct */
        ver = (hdr & QCA_HDR_RECV_VERSION_MASK) >> QCA_HDR_RECV_VERSION_S;
        if (unlikely(ver != QCA_HDR_VERSION))
-               goto out_drop;
+               return NULL;
 
        /* Remove QCA tag and recalculate checksum */
        skb_pull_rcsum(skb, QCA_HDR_LEN);
         */
        ds = dst->cpu_dp->ds;
        if (!ds)
-               goto out_drop;
+               return NULL;
 
        /* Get source port information */
        port = (hdr & QCA_HDR_RECV_SOURCE_PORT_MASK);
        if (!ds->ports[port].netdev)
-               goto out_drop;
+               return NULL;
 
        /* Update skb & forward the frame accordingly */
        skb->dev = ds->ports[port].netdev;
 
        return skb;
-
-out_drop:
-       return NULL;
 }
 
 const struct dsa_device_ops qca_netdev_ops = {
 
        ds = dst->cpu_dp->ds;
 
        if (skb_linearize(skb))
-               goto out_drop;
+               return NULL;
 
        trailer = skb_tail_pointer(skb) - 4;
        if (trailer[0] != 0x80 || (trailer[1] & 0xf8) != 0x00 ||
            (trailer[2] & 0xef) != 0x00 || trailer[3] != 0x00)
-               goto out_drop;
+               return NULL;
 
        source_port = trailer[1] & 7;
        if (source_port >= ds->num_ports || !ds->ports[source_port].netdev)
-               goto out_drop;
+               return NULL;
 
        pskb_trim_rcsum(skb, skb->len - 4);
 
        skb->dev = ds->ports[source_port].netdev;
 
        return skb;
-
-out_drop:
-       return NULL;
 }
 
 const struct dsa_device_ops trailer_netdev_ops = {