mvneta: Try to fix mvneta when compiled as module

When the mvneta driver is compiled as module, the clock is disabled before
it's loading. This will reset the registers values and all configuration
made by the bootloader.

This patch sets the "sgmii serdes configuration" register to a magical value
found in:
https://github.com/yellowback/ubuntu-precise-armadaxp/blob/master/arch/arm/mach-armadaxp/armada_xp_family/ctrlEnv/mvCtrlEnvLib.c

With this change, the interrupts are working/generated and ethernet is
working.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 3ac29c64bd6c7a4fa363e42d63136b6cea706738..b017818bccae1a06bc0c85e88d29733f9a1365e6 100644 (file)
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -88,6 +88,8 @@
 #define      MVNETA_TX_IN_PRGRS                  BIT(1)
 #define      MVNETA_TX_FIFO_EMPTY                BIT(8)
 #define MVNETA_RX_MIN_FRAME_SIZE                 0x247c
+#define MVNETA_SGMII_SERDES_CFG                         0x24A0
+#define      MVNETA_SGMII_SERDES_PROTO          0x0cc7
 #define MVNETA_TYPE_PRIO                         0x24bc
 #define      MVNETA_FORCE_UNI                    BIT(21)
 #define MVNETA_TXQ_CMD_1                         0x24e4
@@ -655,6 +657,8 @@ static void mvneta_port_sgmii_config(struct mvneta_port *pp)
        val = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
        val |= MVNETA_GMAC2_PSC_ENABLE;
        mvreg_write(pp, MVNETA_GMAC_CTRL_2, val);
+
+       mvreg_write(pp, MVNETA_SGMII_SERDES_CFG, MVNETA_SGMII_SERDES_PROTO);
 }
 
 /* Start the Ethernet port RX and TX activity */
@@ -2735,11 +2739,17 @@ static int mvneta_probe(struct platform_device *pdev)
        pp->clk = devm_clk_get(&pdev->dev, NULL);
        if (IS_ERR(pp->clk)) {
                err = PTR_ERR(pp->clk);
-               goto err_unmap;
+               goto err_free_irq;
        }
 
        clk_prepare_enable(pp->clk);
 
+       pp->base = of_iomap(dn, 0);
+       if (pp->base == NULL) {
+               err = -ENOMEM;
+               goto err_clk;
+       }
+
        dt_mac_addr = of_get_mac_address(dn);
        if (dt_mac_addr && is_valid_ether_addr(dt_mac_addr)) {
                mac_from = "device tree";
@@ -2755,12 +2765,6 @@ static int mvneta_probe(struct platform_device *pdev)
                }
        }
 
-       pp->base = of_iomap(dn, 0);
-       if (pp->base == NULL) {
-               err = -ENOMEM;
-               goto err_free_irq;
-       }
-
        pp->tx_done_timer.data = (unsigned long)dev;
        pp->tx_done_timer.function = mvneta_tx_done_timer_callback;
        init_timer(&pp->tx_done_timer);
@@ -2775,7 +2779,7 @@ static int mvneta_probe(struct platform_device *pdev)
        err = mvneta_init(pp, phy_addr);
        if (err < 0) {
                dev_err(&pdev->dev, "can't init eth hal\n");
-               goto err_clk;
+               goto err_unmap;
        }
        mvneta_port_power_up(pp, phy_mode);
 
@@ -2805,10 +2809,10 @@ static int mvneta_probe(struct platform_device *pdev)
 
 err_deinit:
        mvneta_deinit(pp);
-err_clk:
-       clk_disable_unprepare(pp->clk);
 err_unmap:
        iounmap(pp->base);
+err_clk:
+       clk_disable_unprepare(pp->clk);
 err_free_irq:
        irq_dispose_mapping(dev->irq);
 err_free_netdev: