ixgbe: Change Direct Attach Twinax cable detection for SFP+ NICs

The SFF specification for Direct Attach cable detection has now been
ratified.  Previously, DA cable detect was looking at the Twinaxial bit in
byte 9 of the SFP+ EEPROM.  The spec now defines active and passive DA
cables in byte 8 of the SFP+ EEPROM.  This patch changes the cable
detection for both 82598 and 82599 SFP+ adapters to conform to the new
spec.

Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c
index 6d385ea3c2a17c4f76e6a73b8b7cf754f4e1b2c3..8210b49aeff41ce2b4af703a811e30a9d3979fa3 100644 (file)
--- a/drivers/net/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ixgbe/ixgbe_phy.c
@@ -527,7 +527,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
        u8 comp_codes_1g = 0;
        u8 comp_codes_10g = 0;
        u8 oui_bytes[3] = {0, 0, 0};
-       u8 transmission_media = 0;
+       u8 cable_tech = 0;
        u16 enforce_sfp = 0;
 
        status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_IDENTIFIER,
@@ -543,8 +543,8 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
                                            &comp_codes_1g);
                hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_10GBE_COMP_CODES,
                                            &comp_codes_10g);
-               hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_TRANSMISSION_MEDIA,
-                                           &transmission_media);
+               hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_CABLE_TECHNOLOGY,
+                                           &cable_tech);
 
                /* ID Module
                 * =========
@@ -557,7 +557,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
                 * 6    SFP_SR/LR_CORE1 - 82599-specific
                 */
                if (hw->mac.type == ixgbe_mac_82598EB) {
-                       if (transmission_media & IXGBE_SFF_TWIN_AX_CAPABLE)
+                       if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
                                hw->phy.sfp_type = ixgbe_sfp_type_da_cu;
                        else if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
                                hw->phy.sfp_type = ixgbe_sfp_type_sr;
@@ -566,7 +566,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
                        else
                                hw->phy.sfp_type = ixgbe_sfp_type_unknown;
                } else if (hw->mac.type == ixgbe_mac_82599EB) {
-                       if (transmission_media & IXGBE_SFF_TWIN_AX_CAPABLE)
+                       if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
                                if (hw->bus.lan_id == 0)
                                        hw->phy.sfp_type =
                                                     ixgbe_sfp_type_da_cu_core0;
@@ -621,8 +621,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
 
                        switch (vendor_oui) {
                        case IXGBE_SFF_VENDOR_OUI_TYCO:
-                               if (transmission_media &
-                                   IXGBE_SFF_TWIN_AX_CAPABLE)
+                               if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
                                        hw->phy.type = ixgbe_phy_tw_tyco;
                                break;
                        case IXGBE_SFF_VENDOR_OUI_FTL:
@@ -635,8 +634,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
                                hw->phy.type = ixgbe_phy_sfp_intel;
                                break;
                        default:
-                               if (transmission_media &
-                                   IXGBE_SFF_TWIN_AX_CAPABLE)
+                               if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
                                        hw->phy.type = ixgbe_phy_tw_unknown;
                                else
                                        hw->phy.type = ixgbe_phy_sfp_unknown;
@@ -644,8 +642,8 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
                        }
                }
 
-               /* All DA cables are supported */
-               if (transmission_media & IXGBE_SFF_TWIN_AX_CAPABLE) {
+               /* All passive DA cables are supported */
+               if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) {
                        status = 0;
                        goto out;
                }

diff --git a/drivers/net/ixgbe/ixgbe_phy.h b/drivers/net/ixgbe/ixgbe_phy.h
index c9964b7ce1b991de03c0c257799756794c06a336..9b700f5bf1ed5e5859b7a90f11bf9c5dc9966b2f 100644 (file)
--- a/drivers/net/ixgbe/ixgbe_phy.h
+++ b/drivers/net/ixgbe/ixgbe_phy.h
@@ -39,10 +39,10 @@
 #define IXGBE_SFF_VENDOR_OUI_BYTE2   0x27
 #define IXGBE_SFF_1GBE_COMP_CODES    0x6
 #define IXGBE_SFF_10GBE_COMP_CODES   0x3
-#define IXGBE_SFF_TRANSMISSION_MEDIA 0x9
+#define IXGBE_SFF_CABLE_TECHNOLOGY   0x8
 
 /* Bitmasks */
-#define IXGBE_SFF_TWIN_AX_CAPABLE            0x80
+#define IXGBE_SFF_DA_PASSIVE_CABLE           0x4
 #define IXGBE_SFF_1GBASESX_CAPABLE           0x1
 #define IXGBE_SFF_1GBASELX_CAPABLE           0x2
 #define IXGBE_SFF_10GBASESR_CAPABLE          0x10