ARM: dts: qcom: ipq8064: correct LED node names

GPIO LEDs is not a bus, so drop unit-address and also start suffix
numbering from 0:

  Warning (unit_address_vs_reg): /soc/leds/led@7: node has a unit name, but no reg or ranges property

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230420075053.41976-6-krzysztof.kozlowski@linaro.org

diff --git a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
index 4d509876294be3f29215f80071bcf009952b6021..104eb729c2d6c99317d5927311ae422a23c5f055 100644 (file)
--- a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
@@ -323,7 +323,7 @@
                        pinctrl-0 = <&leds_pins>;
                        pinctrl-names = "default";
 
-                       led@7 {
+                       led-0 {
                                label = "rb3011:green:user";
                                color = <LED_COLOR_ID_GREEN>;
                                gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>;

diff --git a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
index 411c8d63c38e10e6ed027452b82e835edbbebf5c..c5abe7151f14299392fd4d98e02fc72a5f1794da 100644 (file)
--- a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
@@ -92,34 +92,34 @@
                        pinctrl-0 = <&leds_pins>;
                        pinctrl-names = "default";
 
-                       led@7 {
+                       led-0 {
                                label = "led_usb1";
                                gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
                                linux,default-trigger = "usbdev";
                                default-state = "off";
                        };
 
-                       led@8 {
+                       led-1 {
                                label = "led_usb3";
                                gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
                                linux,default-trigger = "usbdev";
                                default-state = "off";
                        };
 
-                       led@9 {
+                       led-2 {
                                label = "status_led_fail";
                                function = LED_FUNCTION_STATUS;
                                gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
                                default-state = "off";
                        };
 
-                       led@26 {
+                       led-3 {
                                label = "sata_led";
                                gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
                                default-state = "off";
                        };
 
-                       led@53 {
+                       led-4 {
                                label = "status_led_pass";
                                function = LED_FUNCTION_STATUS;
                                gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;