long ibioctl(struct file *filep, unsigned int cmd, unsigned long arg);
 int osInit(void);
 void osReset(void);
-void os_start_timer(gpib_board_t *board, unsigned int usec_timeout);
-void os_remove_timer(gpib_board_t *board);
+void os_start_timer(struct gpib_board *board, unsigned int usec_timeout);
+void os_remove_timer(struct gpib_board *board);
 void osSendEOI(void);
 void osSendEOI(void);
-void init_gpib_board(gpib_board_t *board);
+void init_gpib_board(struct gpib_board *board);
 static inline unsigned long usec_to_jiffies(unsigned int usec)
 {
        unsigned long usec_per_jiffy = 1000000 / HZ;
        return 1 + (usec + usec_per_jiffy - 1) / usec_per_jiffy;
 };
 
-int serial_poll_all(gpib_board_t *board, unsigned int usec_timeout);
+int serial_poll_all(struct gpib_board *board, unsigned int usec_timeout);
 void init_gpib_descriptor(gpib_descriptor_t *desc);
-int dvrsp(gpib_board_t *board, unsigned int pad, int sad,
+int dvrsp(struct gpib_board *board, unsigned int pad, int sad,
          unsigned int usec_timeout, uint8_t *result);
-int ibAPWait(gpib_board_t *board, int pad);
-int ibAPrsp(gpib_board_t *board, int padsad, char *spb);
-void ibAPE(gpib_board_t *board, int pad, int v);
-int ibcac(gpib_board_t *board, int sync, int fallback_to_async);
-int ibcmd(gpib_board_t *board, uint8_t *buf, size_t length, size_t *bytes_written);
-int ibgts(gpib_board_t *board);
-int ibonline(gpib_board_t *board);
-int iboffline(gpib_board_t *board);
-int iblines(const gpib_board_t *board, short *lines);
-int ibrd(gpib_board_t *board, uint8_t *buf, size_t length, int *end_flag, size_t *bytes_read);
-int ibrpp(gpib_board_t *board, uint8_t *buf);
-int ibrsv2(gpib_board_t *board, uint8_t status_byte, int new_reason_for_service);
-void ibrsc(gpib_board_t *board, int request_control);
-int ibsic(gpib_board_t *board, unsigned int usec_duration);
-int ibsre(gpib_board_t *board, int enable);
-int ibpad(gpib_board_t *board, unsigned int addr);
-int ibsad(gpib_board_t *board, int addr);
-int ibeos(gpib_board_t *board, int eos, int eosflags);
-int ibwait(gpib_board_t *board, int wait_mask, int clear_mask, int set_mask,
+int ibAPWait(struct gpib_board *board, int pad);
+int ibAPrsp(struct gpib_board *board, int padsad, char *spb);
+void ibAPE(struct gpib_board *board, int pad, int v);
+int ibcac(struct gpib_board *board, int sync, int fallback_to_async);
+int ibcmd(struct gpib_board *board, uint8_t *buf, size_t length, size_t *bytes_written);
+int ibgts(struct gpib_board *board);
+int ibonline(struct gpib_board *board);
+int iboffline(struct gpib_board *board);
+int iblines(const struct gpib_board *board, short *lines);
+int ibrd(struct gpib_board *board, uint8_t *buf, size_t length, int *end_flag, size_t *bytes_read);
+int ibrpp(struct gpib_board *board, uint8_t *buf);
+int ibrsv2(struct gpib_board *board, uint8_t status_byte, int new_reason_for_service);
+void ibrsc(struct gpib_board *board, int request_control);
+int ibsic(struct gpib_board *board, unsigned int usec_duration);
+int ibsre(struct gpib_board *board, int enable);
+int ibpad(struct gpib_board *board, unsigned int addr);
+int ibsad(struct gpib_board *board, int addr);
+int ibeos(struct gpib_board *board, int eos, int eosflags);
+int ibwait(struct gpib_board *board, int wait_mask, int clear_mask, int set_mask,
           int *status, unsigned long usec_timeout, gpib_descriptor_t *desc);
-int ibwrt(gpib_board_t *board, uint8_t *buf, size_t cnt, int send_eoi, size_t *bytes_written);
-int ibstatus(gpib_board_t *board);
-int general_ibstatus(gpib_board_t *board, const gpib_status_queue_t *device,
+int ibwrt(struct gpib_board *board, uint8_t *buf, size_t cnt, int send_eoi, size_t *bytes_written);
+int ibstatus(struct gpib_board *board);
+int general_ibstatus(struct gpib_board *board, const gpib_status_queue_t *device,
                     int clear_mask, int set_mask, gpib_descriptor_t *desc);
-int io_timed_out(gpib_board_t *board);
-int ibppc(gpib_board_t *board, uint8_t configuration);
+int io_timed_out(struct gpib_board *board);
+int ibppc(struct gpib_board *board, uint8_t configuration);
 
 #endif /* GPIB_PROTO_INCLUDED */
 
        /* name of board */
        char *name;
        /* attach() initializes board and allocates resources */
-       int (*attach)(gpib_board_t *board, const gpib_board_config_t *config);
+       int (*attach)(struct gpib_board *board, const gpib_board_config_t *config);
        /* detach() shuts down board and frees resources */
-       void (*detach)(gpib_board_t *board);
+       void (*detach)(struct gpib_board *board);
        /* read() should read at most 'length' bytes from the bus into
         * 'buffer'.  It should return when it fills the buffer or
         * encounters an END (EOI and or EOS if appropriate).  It should set 'end'
         * return indicates error.
         * nbytes returns number of bytes read
         */
-       int (*read)(gpib_board_t *board, uint8_t *buffer, size_t length, int *end,
+       int (*read)(struct gpib_board *board, uint8_t *buffer, size_t length, int *end,
                    size_t *bytes_read);
        /* write() should write 'length' bytes from buffer to the bus.
         * If the boolean value send_eoi is nonzero, then EOI should
         * be sent along with the last byte.  Returns number of bytes
         * written or negative value on error.
         */
-       int (*write)(gpib_board_t *board, uint8_t *buffer, size_t length, int send_eoi,
+       int (*write)(struct gpib_board *board, uint8_t *buffer, size_t length, int send_eoi,
                     size_t *bytes_written);
        /* command() writes the command bytes in 'buffer' to the bus
         * Returns zero on success or negative value on error.
         */
-       int (*command)(gpib_board_t *board, uint8_t *buffer, size_t length,
+       int (*command)(struct gpib_board *board, uint8_t *buffer, size_t length,
                       size_t *bytes_written);
        /* Take control (assert ATN).  If 'asyncronous' is nonzero, take
         * control asyncronously (assert ATN immediately without waiting
         * until board becomes controller in charge.  Returns zero no success,
         * nonzero on error.
         */
-       int (*take_control)(gpib_board_t *board, int asyncronous);
+       int (*take_control)(struct gpib_board *board, int asyncronous);
        /* De-assert ATN.  Returns zero on success, nonzer on error.
         */
-       int (*go_to_standby)(gpib_board_t *board);
+       int (*go_to_standby)(struct gpib_board *board);
        /* request/release control of the IFC and REN lines (system controller) */
-       void (*request_system_control)(gpib_board_t *board, int request_control);
+       void (*request_system_control)(struct gpib_board *board, int request_control);
        /* Asserts or de-asserts 'interface clear' (IFC) depending on
         * boolean value of 'assert'
         */
-       void (*interface_clear)(gpib_board_t *board, int assert);
+       void (*interface_clear)(struct gpib_board *board, int assert);
        /* Sends remote enable command if 'enable' is nonzero, disables remote mode
         * if 'enable' is zero
         */
-       void (*remote_enable)(gpib_board_t *board, int enable);
+       void (*remote_enable)(struct gpib_board *board, int enable);
        /* enable END for reads, when byte 'eos' is received.  If
         * 'compare_8_bits' is nonzero, then all 8 bits are compared
         * with the eos bytes.  Otherwise only the 7 least significant
         * bits are compared.
         */
-       int (*enable_eos)(gpib_board_t *board, uint8_t eos, int compare_8_bits);
+       int (*enable_eos)(struct gpib_board *board, uint8_t eos, int compare_8_bits);
        /* disable END on eos byte (END on EOI only)*/
-       void (*disable_eos)(gpib_board_t *board);
+       void (*disable_eos)(struct gpib_board *board);
        /* configure parallel poll */
-       void (*parallel_poll_configure)(gpib_board_t *board, uint8_t configuration);
+       void (*parallel_poll_configure)(struct gpib_board *board, uint8_t configuration);
        /* conduct parallel poll */
-       int (*parallel_poll)(gpib_board_t *board, uint8_t *result);
+       int (*parallel_poll)(struct gpib_board *board, uint8_t *result);
        /* set/clear ist (individual status bit) */
-       void (*parallel_poll_response)(gpib_board_t *board, int ist);
+       void (*parallel_poll_response)(struct gpib_board *board, int ist);
        /* select local parallel poll configuration mode PP2 versus remote PP1 */
-       void (*local_parallel_poll_mode)(gpib_board_t *board, int local);
+       void (*local_parallel_poll_mode)(struct gpib_board *board, int local);
        /* Returns current status of the bus lines.  Should be set to
         * NULL if your board does not have the ability to query the
         * state of the bus lines.
         */
-       int (*line_status)(const gpib_board_t *board);
+       int (*line_status)(const struct gpib_board *board);
        /* updates and returns the board's current status.
         * The meaning of the bits are specified in gpib_user.h
         * in the IBSTA section.  The driver does not need to
         * worry about setting the CMPL, END, TIMO, or ERR bits.
         */
-       unsigned int (*update_status)(gpib_board_t *board, unsigned int clear_mask);
+       unsigned int (*update_status)(struct gpib_board *board, unsigned int clear_mask);
        /* Sets primary address 0-30 for gpib interface card.
         */
-       int (*primary_address)(gpib_board_t *board, unsigned int address);
+       int (*primary_address)(struct gpib_board *board, unsigned int address);
        /* Sets and enables, or disables secondary address 0-30
         * for gpib interface card.
         */
-       int (*secondary_address)(gpib_board_t *board, unsigned int address,
+       int (*secondary_address)(struct gpib_board *board, unsigned int address,
                                 int enable);
        /* Sets the byte the board should send in response to a serial poll.
         * This function should also start or stop requests for service via
         * by IEEE 488.2 section 11.3.3.4.3 "Allowed Coupled Control of
         * STB, reqt, and reqf".
         */
-       void (*serial_poll_response)(gpib_board_t *board, uint8_t status_byte);
+       void (*serial_poll_response)(struct gpib_board *board, uint8_t status_byte);
        /* Sets the byte the board should send in response to a serial poll.
         * This function should also request service via IEEE 488.2 reqt/reqf
         * based on MSS (bit 6 of the status_byte) and new_reason_for_service.
         * If this method is left NULL by the driver, then the user library
         * function ibrsv2 will not work.
         */
-       void (*serial_poll_response2)(gpib_board_t *board, uint8_t status_byte,
+       void (*serial_poll_response2)(struct gpib_board *board, uint8_t status_byte,
                                      int new_reason_for_service);
        /* returns the byte the board will send in response to a serial poll.
         */
-       uint8_t (*serial_poll_status)(gpib_board_t *board);
+       uint8_t (*serial_poll_status)(struct gpib_board *board);
        /* adjust T1 delay */
-       unsigned int (*t1_delay)(gpib_board_t *board, unsigned int nano_sec);
+       unsigned int (*t1_delay)(struct gpib_board *board, unsigned int nano_sec);
        /* go to local mode */
-       void (*return_to_local)(gpib_board_t *board);
+       void (*return_to_local)(struct gpib_board *board);
        /* board does not support 7 bit eos comparisons */
        unsigned no_7_bit_eos : 1;
        /* skip check for listeners before trying to send command bytes */
 struct gpib_pseudo_irq {
        struct timer_list timer;
        irqreturn_t (*handler)(int irq, void *arg);
-       gpib_board_t *board;
+       struct gpib_board *board;
        atomic_t active;
 };
 
        struct module *module;
 } gpib_interface_list_t;
 
-/* One gpib_board_t is allocated for each physical board in the computer.
+/* One struct gpib_board is allocated for each physical board in the computer.
  * It provides storage for variables local to each board, and interface
  * functions for performing operations on the board
  */