ARM: dts: imx6sl-evk: Convert from fbdev to drm bindings

It is preferred to use the panel compatible string rather than passing
the LCD timing in the device tree.

So pass the "sii,43wvf1g" compatible string which describes the parallel
LCD.

Also, pass the 'backlight' property as described in
Documentation/devicetree/bindings/display/panel/simple-panel.txt

Signed-off-by: Marco Franchi <marco.franchi@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
index c9114cc72b3fd1deeb4a4cba11d5f21b9e97c475..2844ab54175999fcae2961579cc3e3629f8a57ea 100644 (file)
--- a/arch/arm/boot/dts/imx6sl-evk.dts
+++ b/arch/arm/boot/dts/imx6sl-evk.dts
@@ -20,7 +20,7 @@
                reg = <0x80000000 0x40000000>;
        };
 
-       backlight {
+       backlight_display: backlight_display {
                compatible = "pwm-backlight";
                pwms = <&pwm1 0 5000000>;
                brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -82,6 +82,13 @@
                enable-active-high;
        };
 
+       reg_lcd_5v: regulator-lcd-5v {
+               compatible = "regulator-fixed";
+               regulator-name = "lcd-5v0";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+       };
+
        sound {
                compatible = "fsl,imx6sl-evk-wm8962", "fsl,imx-audio-wm8962";
                model = "wm8962-audio";
@@ -97,6 +104,19 @@
                mux-int-port = <2>;
                mux-ext-port = <3>;
        };
+
+       panel {
+               compatible = "sii,43wvf1g";
+               backlight = <&backlight_display>;
+               dvdd-supply = <&reg_lcd_3v3>;
+               avdd-supply = <&reg_lcd_5v>;
+
+               port {
+                       panel_in: endpoint {
+                               remote-endpoint = <&display_out>;
+                       };
+               };
+       };
 };
 
 &audmux {
@@ -535,31 +555,11 @@
 &lcdif {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_lcd>;
-       lcd-supply = <&reg_lcd_3v3>;
-       display = <&display0>;
        status = "okay";
 
-       display0: display0 {
-               bits-per-pixel = <32>;
-               bus-width = <24>;
-
-               display-timings {
-                       native-mode = <&timing0>;
-                       timing0: timing0 {
-                               clock-frequency = <33500000>;
-                               hactive = <800>;
-                               vactive = <480>;
-                               hback-porch = <89>;
-                               hfront-porch = <164>;
-                               vback-porch = <23>;
-                               vfront-porch = <10>;
-                               hsync-len = <10>;
-                               vsync-len = <10>;
-                               hsync-active = <0>;
-                               vsync-active = <0>;
-                               de-active = <1>;
-                               pixelclk-active = <0>;
-                       };
+       port {
+               display_out: endpoint {
+                       remote-endpoint = <&panel_in>;
                };
        };
 };