Extend the patch from Philby John to the other "RealView" boards.
Rename the constants and offsets to reflect their actual functions.
Cc: Philby John <pjohn@in.mvista.com>
Signed-off-by: Colin Tuckley <colin.tuckley@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
 #define REALVIEW_PB1176_L220_BASE              0x10110000 /* L220 registers */
 
 /*
- * Control register SYS_RESETCTL is set to 1 to force a soft reset
+ * Control register SYS_RESETCTL Bit 8 is set to 1 to force a soft reset
  */
-#define REALVIEW_PB1176_SYS_LOCKVAL_RSTCTL    0x0100
+#define REALVIEW_PB1176_SYS_SOFT_RESET    0x0100
 
 #endif /* __ASM_ARCH_BOARD_PB1176_H */
 
  *     SYS_CLD, SYS_BOOTCS
  */
 #define REALVIEW_SYS_LOCK_LOCKED    (1 << 16)
-#define REALVIEW_SYS_LOCKVAL_MASK      0xA05F         /* Enable write access */
+#define REALVIEW_SYS_LOCK_VAL  0xA05F         /* Enable write access */
 
 /*
  * REALVIEW_SYS_FLASH
 
        .init           = realview_eb_timer_init,
 };
 
+static void realview_eb_reset(char mode)
+{
+       void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
+       void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
+
+       /*
+        * To reset, we hit the on-board reset register
+        * in the system FPGA
+        */
+       __raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
+       if (core_tile_eb11mp())
+               __raw_writel(0x0008, reset_ctrl);
+}
+
 static void __init realview_eb_init(void)
 {
        int i;
 #ifdef CONFIG_LEDS
        leds_event = realview_leds_event;
 #endif
+       realview_reset = realview_eb_reset;
 }
 
 MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
 
 
 static void realview_pb1176_reset(char mode)
 {
-       void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) +
-               REALVIEW_SYS_RESETCTL_OFFSET;
-       void __iomem *rst_hdr_ctrl = __io_address(REALVIEW_SYS_BASE) +
-               REALVIEW_SYS_LOCK_OFFSET;
-       __raw_writel(REALVIEW_SYS_LOCKVAL_MASK, rst_hdr_ctrl);
-       __raw_writel(REALVIEW_PB1176_SYS_LOCKVAL_RSTCTL, hdr_ctrl);
+       void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
+       void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
+       __raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
+       __raw_writel(REALVIEW_PB1176_SYS_SOFT_RESET, reset_ctrl);
 }
 
 static void realview_pb1176_fixup(struct machine_desc *mdesc,
 
 
 static void realview_pb11mp_reset(char mode)
 {
-       void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) +
-               REALVIEW_SYS_RESETCTL_OFFSET;
-       unsigned int val;
+       void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
+       void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
 
        /*
         * To reset, we hit the on-board reset register
         * in the system FPGA
         */
-       val = __raw_readl(hdr_ctrl);
-       val |= REALVIEW_PB11MP_SYS_CTRL_RESET_CONFIGCLR;
-       __raw_writel(val, hdr_ctrl);
+       __raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
+       __raw_writel(0x0000, reset_ctrl);
+       __raw_writel(0x0004, reset_ctrl);
 }
 
 static void __init realview_pb11mp_init(void)
 
        .init           = realview_pba8_timer_init,
 };
 
+static void realview_pba8_reset(char mode)
+{
+       void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
+       void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
+
+       /*
+        * To reset, we hit the on-board reset register
+        * in the system FPGA
+        */
+       __raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
+       __raw_writel(0x0000, reset_ctrl);
+       __raw_writel(0x0004, reset_ctrl);
+}
+
 static void __init realview_pba8_init(void)
 {
        int i;
 #ifdef CONFIG_LEDS
        leds_event = realview_leds_event;
 #endif
+       realview_reset = realview_pba8_reset;
 }
 
 MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8")
 
 #endif
 }
 
+static void realview_pbx_reset(char mode)
+{
+       void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
+       void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
+
+       /*
+        * To reset, we hit the on-board reset register
+        * in the system FPGA
+        */
+       __raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
+       __raw_writel(0x0000, reset_ctrl);
+       __raw_writel(0x0004, reset_ctrl);
+}
+
 static void __init realview_pbx_init(void)
 {
        int i;
 #ifdef CONFIG_LEDS
        leds_event = realview_leds_event;
 #endif
+       realview_reset = realview_pbx_reset;
 }
 
 MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")