pcf8563: add wakeup-source support

In some platforms, the RTC is able to wake up the system but is not
directly connected to an IRQ. Add wakeup-source property support to be able
to express this in the Device Tree.

Link: https://lore.kernel.org/r/20240426225821.448963-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

diff --git a/drivers/rtc/rtc-pcf8563.c b/drivers/rtc/rtc-pcf8563.c
index ea82b89d8929f95fb26e1f3e77794d75a094a429..1949d7473310120891e1a306585d21c279fcb987 100644 (file)
--- a/drivers/rtc/rtc-pcf8563.c
+++ b/drivers/rtc/rtc-pcf8563.c
@@ -527,7 +527,6 @@ static int pcf8563_probe(struct i2c_client *client)
 
        i2c_set_clientdata(client, pcf8563);
        pcf8563->client = client;
-       device_set_wakeup_capable(&client->dev, 1);
 
        /* Set timer to lowest frequency to save power (ref Haoyu datasheet) */
        buf = PCF8563_TMRC_1_60;
@@ -553,6 +552,7 @@ static int pcf8563_probe(struct i2c_client *client)
        /* the pcf8563 alarm only supports a minute accuracy */
        set_bit(RTC_FEATURE_ALARM_RES_MINUTE, pcf8563->rtc->features);
        clear_bit(RTC_FEATURE_UPDATE_INTERRUPT, pcf8563->rtc->features);
+       clear_bit(RTC_FEATURE_ALARM, pcf8563->rtc->features);
        pcf8563->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
        pcf8563->rtc->range_max = RTC_TIMESTAMP_END_2099;
        pcf8563->rtc->set_start_time = true;
@@ -573,7 +573,12 @@ static int pcf8563_probe(struct i2c_client *client)
                        return err;
                }
        } else {
-               clear_bit(RTC_FEATURE_ALARM, pcf8563->rtc->features);
+               client->irq = 0;
+       }
+
+       if (client->irq > 0 || device_property_read_bool(&client->dev, "wakeup-source")) {
+               device_init_wakeup(&client->dev, true);
+               set_bit(RTC_FEATURE_ALARM, pcf8563->rtc->features);
        }
 
        err = devm_rtc_register_device(pcf8563->rtc);