arm64: dts: renesas: rzg3e-smarc-som: Add support to enable SD on SDHI0

Add support for enabling SD on SDHI0 on RZ/G3E SMARC SoM. It is enabled
by setting the macro SW_SD0_DEV_SEL to 1 in board DTS and setting the
switch SYS.1 to ON position on the SoM.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250206134047.67866-8-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

diff --git a/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dts b/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dts
index c063d47e2952f2eb3d6b0f071bd086768e99dfda..152a00aa354bb47f1eee0c47791fc31f44641f35 100644 (file)
--- a/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dts
+++ b/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dts
@@ -7,6 +7,9 @@
 
 /dts-v1/;
 
+/* Switch selection settings */
+#define SW_SD0_DEV_SEL         0
+
 #include <dt-bindings/pinctrl/renesas,r9a09g047-pinctrl.h>
 #include "r9a09g047e57.dtsi"
 #include "rzg3e-smarc-som.dtsi"

diff --git a/arch/arm64/boot/dts/renesas/rzg3e-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg3e-smarc-som.dtsi
index fcbabe2cb0038a013e801644fa5cece9d56fe42b..72b42a81bcf34e588e64497cc0d52500d458597c 100644 (file)
--- a/arch/arm64/boot/dts/renesas/rzg3e-smarc-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg3e-smarc-som.dtsi
@@ -5,6 +5,15 @@
  * Copyright (C) 2024 Renesas Electronics Corp.
  */
 
+/*
+ * Please set the switch position SYS.1 on the SoM and the corresponding macro
+ * SW_SD0_DEV_SEL on the board DTS:
+ *
+ * SW_SD0_DEV_SEL:
+ *      0 - SD0 is connected to eMMC (default)
+ *      1 - SD0 is connected to uSD0 card
+ */
+
 / {
        compatible = "renesas,rzg3e-smarcm", "renesas,r9a09g047e57", "renesas,r9a09g047";
 
@@ -61,6 +70,32 @@
                };
        };
 
+       sdhi0_usd_pins: sd0-usd {
+               sd0-cd {
+                       pinmux = <RZG3E_PORT_PINMUX(5, 0, 8)>;
+               };
+
+               sd0-ctrl {
+                       pins = "SD0CLK", "SD0CMD";
+                       renesas,output-impedance = <3>;
+               };
+
+               sd0-data {
+                       pins = "SD0DAT0", "SD0DAT1", "SD0DAT2", "SD0DAT3";
+                       renesas,output-impedance = <3>;
+               };
+
+               sd0-iovs {
+                       pins = "SD0IOVS";
+                       renesas,output-impedance = <3>;
+               };
+
+               sd0-pwen {
+                       pins = "SD0PWEN";
+                       renesas,output-impedance = <3>;
+               };
+       };
+
        sdhi2_pins: sd2 {
                sd2-cd {
                        pinmux = <RZG3E_PORT_PINMUX(K, 0, 1)>; /* SD2CD */
@@ -96,6 +131,24 @@
        clock-frequency = <32768>;
 };
 
+#if (SW_SD0_DEV_SEL)
+&sdhi0 {
+       pinctrl-0 = <&sdhi0_usd_pins>;
+       pinctrl-1 = <&sdhi0_usd_pins>;
+       pinctrl-names = "default", "state_uhs";
+
+       vmmc-supply = <&reg_3p3v>;
+       vqmmc-supply = <&sdhi0_vqmmc>;
+       bus-width = <4>;
+       sd-uhs-sdr50;
+       sd-uhs-sdr104;
+       status = "okay";
+};
+
+&sdhi0_vqmmc {
+       status = "okay";
+};
+#else
 &sdhi0 {
        pinctrl-0 = <&sdhi0_emmc_pins>;
        pinctrl-1 = <&sdhi0_emmc_pins>;
@@ -109,6 +162,7 @@
        fixed-emmc-driver-type = <1>;
        status = "okay";
 };
+#endif
 
 &sdhi2 {
        pinctrl-0 = <&sdhi2_pins>;