return true;
}
-static u8 iwl_mld_sta_rx_bw_to_fw(enum ieee80211_sta_rx_bandwidth bw)
-{
- switch (bw) {
- default: /* potential future values not supported by this hw/driver */
- case IEEE80211_STA_RX_BW_20:
- return IWL_LINK_MODIFY_BW_20;
- case IEEE80211_STA_RX_BW_40:
- return IWL_LINK_MODIFY_BW_40;
- case IEEE80211_STA_RX_BW_80:
- return IWL_LINK_MODIFY_BW_80;
- case IEEE80211_STA_RX_BW_160:
- return IWL_LINK_MODIFY_BW_160;
- case IEEE80211_STA_RX_BW_320:
- return IWL_LINK_MODIFY_BW_320;
- }
-}
-
-static int _iwl_mld_change_link_in_fw(struct iwl_mld *mld,
- struct ieee80211_bss_conf *link,
- enum ieee80211_sta_rx_bandwidth bw,
- u32 changes)
+int
+iwl_mld_change_link_in_fw(struct iwl_mld *mld, struct ieee80211_bss_conf *link,
+ u32 changes)
{
struct iwl_mld_link *mld_link = iwl_mld_link_from_mac80211(link);
struct ieee80211_vif *vif = link->vif;
cmd.bi = cpu_to_le32(link->beacon_int);
cmd.dtim_interval = cpu_to_le32(link->beacon_int * link->dtim_period);
- if (changes & LINK_CONTEXT_MODIFY_BANDWIDTH)
- cmd.modify_bandwidth = iwl_mld_sta_rx_bw_to_fw(bw);
-
/* Configure HE parameters only if HE is supported, and only after
* the parameters are set in mac80211 (meaning after assoc)
*/
return iwl_mld_send_link_cmd(mld, &cmd, FW_CTXT_ACTION_MODIFY);
}
-int iwl_mld_change_link_in_fw(struct iwl_mld *mld,
- struct ieee80211_bss_conf *link,
- u32 changes)
-{
- if (WARN_ON(changes & LINK_CONTEXT_MODIFY_BANDWIDTH))
- changes &= ~LINK_CONTEXT_MODIFY_BANDWIDTH;
-
- return _iwl_mld_change_link_in_fw(mld, link, 0, changes);
-}
-
-int iwl_mld_change_link_omi_bw(struct iwl_mld *mld,
- struct ieee80211_bss_conf *link,
- enum ieee80211_sta_rx_bandwidth bw)
-{
- return _iwl_mld_change_link_in_fw(mld, link, bw,
- LINK_CONTEXT_MODIFY_BANDWIDTH);
-}
-
int iwl_mld_activate_link(struct iwl_mld *mld,
struct ieee80211_bss_conf *link)
{
struct iwl_mld_link *mld_link = iwl_mld_link_from_mac80211(link);
- struct iwl_mld_vif *mld_vif = iwl_mld_vif_from_mac80211(mld_link->vif);
+ struct iwl_mld_vif *mld_vif = iwl_mld_vif_from_mac80211(link->vif);
int ret;
lockdep_assert_wiphy(mld->wiphy);
if (WARN_ON(!mld_link || mld_link->active))
return -EINVAL;
- mld_link->rx_omi.exit_ts = jiffies;
mld_link->active = true;
ret = iwl_mld_change_link_in_fw(mld, link,
iwl_mld_send_link_cmd(mld, &cmd, FW_CTXT_ACTION_REMOVE);
}
-static void iwl_mld_omi_bw_update(struct iwl_mld *mld,
- struct ieee80211_bss_conf *link_conf,
- struct iwl_mld_link *mld_link,
- struct ieee80211_link_sta *link_sta,
- enum ieee80211_sta_rx_bandwidth bw,
- bool ap_update)
-{
- enum ieee80211_sta_rx_bandwidth apply_bw;
-
- mld_link->rx_omi.desired_bw = bw;
-
- /* Can't update OMI while already in progress, desired_bw was
- * set so on FW notification the worker will see the change
- * and apply new the new desired bw.
- */
- if (mld_link->rx_omi.bw_in_progress)
- return;
-
- if (bw == IEEE80211_STA_RX_BW_MAX)
- apply_bw = ieee80211_chan_width_to_rx_bw(link_conf->chanreq.oper.width);
- else
- apply_bw = bw;
-
- if (!ap_update) {
- /* The update isn't due to AP tracking after leaving OMI,
- * where the AP could increase BW and then we must tell
- * it that we can do the increased BW as well, if we did
- * update the chandef.
- * In this case, if we want MAX, then we will need to send
- * a new OMI to the AP if it increases its own bandwidth as
- * we can (due to internal and FW limitations, and being
- * worried the AP might break) only send to what we're doing
- * at the moment. In this case, set last_max_bw; otherwise
- * if we really want to decrease our bandwidth set it to 0
- * to indicate no updates are needed if the AP changes.
- */
- if (bw != IEEE80211_STA_RX_BW_MAX)
- mld_link->rx_omi.last_max_bw = apply_bw;
- else
- mld_link->rx_omi.last_max_bw = 0;
- } else {
- /* Otherwise, if we're already trying to do maximum and
- * the AP is changing, set last_max_bw to the new max the
- * AP is using, we'll only get to this code path if the
- * new bandwidth of the AP is bigger than what we sent it
- * previously. This avoids repeatedly sending updates if
- * it changes bandwidth, only doing it once on an increase.
- */
- mld_link->rx_omi.last_max_bw = apply_bw;
- }
-
- if (ieee80211_prepare_rx_omi_bw(link_sta, bw)) {
- mld_link->rx_omi.bw_in_progress = apply_bw;
- iwl_mld_change_link_omi_bw(mld, link_conf, apply_bw);
- }
-}
-
-static void iwl_mld_omi_bw_finished_work(struct wiphy *wiphy,
- struct wiphy_work *work)
-{
- struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
- struct iwl_mld *mld = IWL_MAC80211_GET_MLD(hw);
- struct iwl_mld_link *mld_link =
- container_of(work, typeof(*mld_link), rx_omi.finished_work.work);
- enum ieee80211_sta_rx_bandwidth desired_bw, switched_to_bw;
- struct ieee80211_vif *vif = mld_link->vif;
- struct iwl_mld_vif *mld_vif = iwl_mld_vif_from_mac80211(vif);
- struct ieee80211_bss_conf *link_conf;
- struct ieee80211_link_sta *link_sta;
-
- if (!mld_vif->ap_sta)
- return;
-
- link_sta = wiphy_dereference(mld->wiphy,
- mld_vif->ap_sta->link[mld_link->link_id]);
- if (WARN_ON_ONCE(!link_sta))
- return;
-
- link_conf = link_conf_dereference_protected(vif, link_sta->link_id);
- if (WARN_ON_ONCE(!link_conf))
- return;
-
- if (WARN_ON(!mld_link->rx_omi.bw_in_progress))
- return;
-
- desired_bw = mld_link->rx_omi.desired_bw;
- switched_to_bw = mld_link->rx_omi.bw_in_progress;
-
- ieee80211_finalize_rx_omi_bw(link_sta);
- mld_link->rx_omi.bw_in_progress = 0;
-
- if (desired_bw != switched_to_bw)
- iwl_mld_omi_bw_update(mld, link_conf, mld_link, link_sta,
- desired_bw, false);
-}
-
-static struct ieee80211_vif *
-iwl_mld_get_omi_bw_reduction_pointers(struct iwl_mld *mld,
- struct ieee80211_link_sta **link_sta,
- struct iwl_mld_link **mld_link)
-{
- struct iwl_mld_vif *mld_vif;
- struct ieee80211_vif *vif;
- int n_link_stas = 0;
-
- *link_sta = NULL;
-
- if (mld->trans->mac_cfg->device_family < IWL_DEVICE_FAMILY_SC)
- return NULL;
-
- vif = iwl_mld_get_bss_vif(mld);
- if (!vif)
- return NULL;
-
- for (int i = 0; i < ARRAY_SIZE(mld->fw_id_to_link_sta); i++) {
- struct ieee80211_link_sta *tmp;
-
- tmp = wiphy_dereference(mld->wiphy, mld->fw_id_to_link_sta[i]);
- if (IS_ERR_OR_NULL(tmp))
- continue;
-
- n_link_stas++;
- *link_sta = tmp;
- }
-
- /* can't do anything if we have TDLS peers or EMLSR */
- if (n_link_stas != 1)
- return NULL;
-
- mld_vif = iwl_mld_vif_from_mac80211(vif);
- *mld_link = iwl_mld_link_dereference_check(mld_vif,
- (*link_sta)->link_id);
- if (WARN_ON(!*mld_link))
- return NULL;
-
- return vif;
-}
-
-void iwl_mld_omi_ap_changed_bw(struct iwl_mld *mld,
- struct ieee80211_bss_conf *link_conf,
- enum ieee80211_sta_rx_bandwidth bw)
-{
- struct ieee80211_link_sta *link_sta;
- struct iwl_mld_link *mld_link;
- struct ieee80211_vif *vif;
-
- vif = iwl_mld_get_omi_bw_reduction_pointers(mld, &link_sta, &mld_link);
- if (!vif)
- return;
-
- if (WARN_ON(link_conf->vif != vif))
- return;
-
- /* This is 0 if we requested an OMI BW reduction and don't want to
- * be sending an OMI when the AP's bandwidth changes.
- */
- if (!mld_link->rx_omi.last_max_bw)
- return;
-
- /* We only need to tell the AP if it increases BW over what we last
- * told it we were using, if it reduces then our last OMI to it will
- * not get used anyway (e.g. we said we want 160 but it's doing 80.)
- */
- if (bw < mld_link->rx_omi.last_max_bw)
- return;
-
- iwl_mld_omi_bw_update(mld, link_conf, mld_link, link_sta, bw, true);
-}
-
-void iwl_mld_handle_omi_status_notif(struct iwl_mld *mld,
- struct iwl_rx_packet *pkt)
-{
- const struct iwl_omi_send_status_notif *notif = (const void *)pkt->data;
- struct ieee80211_link_sta *link_sta;
- struct iwl_mld_link *mld_link;
- struct iwl_mld_vif *mld_vif;
- struct ieee80211_vif *vif;
- u32 sta_id;
-
- sta_id = le32_to_cpu(notif->sta_id);
-
- if (IWL_FW_CHECK(mld, sta_id >= mld->fw->ucode_capa.num_stations,
- "Invalid station %d\n", sta_id))
- return;
-
- link_sta = wiphy_dereference(mld->wiphy, mld->fw_id_to_link_sta[sta_id]);
- if (IWL_FW_CHECK(mld, !link_sta, "Station does not exist\n"))
- return;
-
- vif = iwl_mld_sta_from_mac80211(link_sta->sta)->vif;
- mld_vif = iwl_mld_vif_from_mac80211(vif);
-
- mld_link = iwl_mld_link_dereference_check(mld_vif, link_sta->link_id);
- if (WARN(!mld_link, "Link %d does not exist\n", link_sta->link_id))
- return;
-
- if (IWL_FW_CHECK(mld, !mld_link->rx_omi.bw_in_progress,
- "OMI notification when not requested\n"))
- return;
-
- wiphy_delayed_work_queue(mld->hw->wiphy,
- &mld_link->rx_omi.finished_work,
- msecs_to_jiffies(IWL_MLD_OMI_AP_SETTLE_DELAY));
-}
-
-void iwl_mld_leave_omi_bw_reduction(struct iwl_mld *mld)
-{
- struct ieee80211_bss_conf *link_conf;
- struct ieee80211_link_sta *link_sta;
- struct iwl_mld_link *mld_link;
- struct ieee80211_vif *vif;
-
- vif = iwl_mld_get_omi_bw_reduction_pointers(mld, &link_sta, &mld_link);
- if (!vif)
- return;
-
- link_conf = link_conf_dereference_protected(vif, link_sta->link_id);
- if (WARN_ON_ONCE(!link_conf))
- return;
-
- if (!link_conf->he_support)
- return;
-
- mld_link->rx_omi.exit_ts = jiffies;
-
- iwl_mld_omi_bw_update(mld, link_conf, mld_link, link_sta,
- IEEE80211_STA_RX_BW_MAX, false);
-}
-
-void iwl_mld_check_omi_bw_reduction(struct iwl_mld *mld)
-{
- enum ieee80211_sta_rx_bandwidth bw = IEEE80211_STA_RX_BW_MAX;
- struct ieee80211_chanctx_conf *chanctx;
- struct ieee80211_bss_conf *link_conf;
- struct ieee80211_link_sta *link_sta;
- struct cfg80211_chan_def chandef;
- struct iwl_mld_link *mld_link;
- struct iwl_mld_vif *mld_vif;
- struct ieee80211_vif *vif;
- struct iwl_mld_phy *phy;
- u16 punctured;
- int exit_thr;
-
- /* not allowed in CAM mode */
- if (iwlmld_mod_params.power_scheme == IWL_POWER_SCHEME_CAM)
- return;
-
- /* must have one BSS connection (no P2P), no TDLS, nor EMLSR */
- vif = iwl_mld_get_omi_bw_reduction_pointers(mld, &link_sta, &mld_link);
- if (!vif)
- return;
-
- link_conf = link_conf_dereference_protected(vif, link_sta->link_id);
- if (WARN_ON_ONCE(!link_conf))
- return;
-
- if (!link_conf->he_support)
- return;
-
- chanctx = wiphy_dereference(mld->wiphy, mld_link->chan_ctx);
- if (WARN_ON(!chanctx))
- return;
-
- mld_vif = iwl_mld_vif_from_mac80211(vif);
- if (!mld_vif->authorized)
- goto apply;
-
- /* must not be in low-latency mode */
- if (iwl_mld_vif_low_latency(mld_vif))
- goto apply;
-
- chandef = link_conf->chanreq.oper;
-
- switch (chandef.width) {
- case NL80211_CHAN_WIDTH_320:
- exit_thr = IWL_MLD_OMI_EXIT_CHAN_LOAD_320;
- break;
- case NL80211_CHAN_WIDTH_160:
- exit_thr = IWL_MLD_OMI_EXIT_CHAN_LOAD_160;
- break;
- default:
- /* since we reduce to 80 MHz, must have more to start with */
- goto apply;
- }
-
- /* not to be done if primary 80 MHz is punctured */
- if (cfg80211_chandef_primary(&chandef, NL80211_CHAN_WIDTH_80,
- &punctured) < 0 ||
- punctured != 0)
- goto apply;
-
- phy = iwl_mld_phy_from_mac80211(chanctx);
-
- if (phy->channel_load_by_us > exit_thr) {
- /* send OMI for max bandwidth */
- goto apply;
- }
-
- if (phy->channel_load_by_us > IWL_MLD_OMI_ENTER_CHAN_LOAD) {
- /* no changes between enter/exit thresholds */
- return;
- }
-
- if (time_is_after_jiffies(mld_link->rx_omi.exit_ts +
- msecs_to_jiffies(IWL_MLD_OMI_EXIT_PROTECTION)))
- return;
-
- /* reduce bandwidth to 80 MHz to save power */
- bw = IEEE80211_STA_RX_BW_80;
-apply:
- iwl_mld_omi_bw_update(mld, link_conf, mld_link, link_sta, bw, false);
-}
-
IWL_MLD_ALLOC_FN(link, bss_conf)
/* Constructor function for struct iwl_mld_link */
iwl_mld_init_link(struct iwl_mld *mld, struct ieee80211_bss_conf *link,
struct iwl_mld_link *mld_link)
{
- mld_link->vif = link->vif;
- mld_link->link_id = link->link_id;
mld_link->average_beacon_energy = 0;
iwl_mld_init_internal_sta(&mld_link->bcast_sta);
iwl_mld_init_internal_sta(&mld_link->mcast_sta);
iwl_mld_init_internal_sta(&mld_link->mon_sta);
- if (!mld->fw_status.in_hw_restart)
- wiphy_delayed_work_init(&mld_link->rx_omi.finished_work,
- iwl_mld_omi_bw_finished_work);
-
return iwl_mld_allocate_link_fw_id(mld, &mld_link->fw_id, link);
}
RCU_INIT_POINTER(mld_vif->link[bss_conf->link_id], NULL);
- wiphy_delayed_work_cancel(mld->wiphy, &link->rx_omi.finished_work);
-
if (WARN_ON(link->fw_id >= mld->fw->ucode_capa.num_links))
return;
* @he_ru_2mhz_block: 26-tone RU OFDMA transmissions should be blocked.
* @igtk: fw can only have one IGTK at a time, whereas mac80211 can have two.
* This tracks the one IGTK that currently exists in FW.
- * @vif: the vif this link belongs to
* @bcast_sta: station used for broadcast packets. Used in AP, GO and IBSS.
* @mcast_sta: station used for multicast packets. Used in AP, GO and IBSS.
* @mon_sta: station used for TX injection in monitor interface.
- * @link_id: over the air link ID
* @average_beacon_energy: average beacon energy for beacons received during
* client connections
* @ap_early_keys: The firmware cannot install keys before bcast/mcast STAs,
* @silent_deactivation: next deactivation needs to be silent.
* @probe_resp_data: data from FW notification to store NOA related data to be
* inserted into probe response.
- * @rx_omi: data for BW reduction with OMI
- * @rx_omi.bw_in_progress: update is in progress (indicates target BW)
- * @rx_omi.exit_ts: timestamp of last exit
- * @rx_omi.finished_work: work for the delayed reaction to the firmware saying
- * the change was applied, and for then applying a new mode if it was
- * updated while waiting for firmware/AP settle delay.
- * @rx_omi.desired_bw: desired bandwidth
- * @rx_omi.last_max_bw: last maximum BW used by firmware, for AP BW changes
*/
struct iwl_mld_link {
struct rcu_head rcu_head;
struct ieee80211_key_conf *igtk;
);
/* And here fields that survive a fw restart */
- struct ieee80211_vif *vif;
struct iwl_mld_int_sta bcast_sta;
struct iwl_mld_int_sta mcast_sta;
struct iwl_mld_int_sta mon_sta;
- u8 link_id;
-
- struct {
- struct wiphy_delayed_work finished_work;
- unsigned long exit_ts;
- enum ieee80211_sta_rx_bandwidth bw_in_progress,
- desired_bw,
- last_max_bw;
- } rx_omi;
/* we can only have 2 GTK + 2 IGTK + 2 BIGTK active at a time */
struct ieee80211_key_conf *ap_early_keys[6];
struct ieee80211_bss_conf *link);
void iwl_mld_deactivate_link(struct iwl_mld *mld,
struct ieee80211_bss_conf *link);
-int iwl_mld_change_link_omi_bw(struct iwl_mld *mld,
- struct ieee80211_bss_conf *link,
- enum ieee80211_sta_rx_bandwidth bw);
int iwl_mld_change_link_in_fw(struct iwl_mld *mld,
struct ieee80211_bss_conf *link, u32 changes);
void iwl_mld_handle_missed_beacon_notif(struct iwl_mld *mld,
int iwl_mld_get_chan_load_by_others(struct iwl_mld *mld,
struct ieee80211_bss_conf *link_conf,
bool expect_active_link);
-void iwl_mld_handle_omi_status_notif(struct iwl_mld *mld,
- struct iwl_rx_packet *pkt);
-void iwl_mld_leave_omi_bw_reduction(struct iwl_mld *mld);
-void iwl_mld_check_omi_bw_reduction(struct iwl_mld *mld);
-void iwl_mld_omi_ap_changed_bw(struct iwl_mld *mld,
- struct ieee80211_bss_conf *link_conf,
- enum ieee80211_sta_rx_bandwidth bw);
void iwl_mld_handle_beacon_filter_notif(struct iwl_mld *mld,
struct iwl_rx_packet *pkt);
if (n_active > 1) {
struct iwl_mld_vif *mld_vif = iwl_mld_vif_from_mac80211(vif);
- iwl_mld_leave_omi_bw_reduction(mld);
-
/* Indicate to mac80211 that EML is enabled */
vif->driver_flags |= IEEE80211_VIF_EML_ACTIVE;
mld_vif->emlsr.last_entry_ts = jiffies;
if (changes & (BSS_CHANGED_CQM | BSS_CHANGED_BEACON_INFO))
iwl_mld_enable_beacon_filter(mld, link_conf, false);
- /* If we have used OMI before to reduce bandwidth to 80 MHz and then
- * increased to 160 MHz again, and then the AP changes to 320 MHz, it
- * will think that we're limited to 160 MHz right now. Update it by
- * requesting a new OMI bandwidth.
- */
- if (changes & BSS_CHANGED_BANDWIDTH) {
- enum ieee80211_sta_rx_bandwidth bw;
-
- bw = ieee80211_chan_width_to_rx_bw(link_conf->chanreq.oper.width);
-
- iwl_mld_omi_ap_changed_bw(mld, link_conf, bw);
-
- }
-
if (changes & BSS_CHANGED_BANDWIDTH)
iwl_mld_retry_emlsr(mld, vif);
}
return iwl_mld_scan_stop(mld, IWL_MLD_SCAN_SCHED, false);
}
-static void
-iwl_mld_restart_complete_vif(void *data, u8 *mac, struct ieee80211_vif *vif)
-{
- struct iwl_mld_vif *mld_vif = iwl_mld_vif_from_mac80211(vif);
- struct ieee80211_bss_conf *link_conf;
- struct iwl_mld *mld = data;
- int link_id;
-
- for_each_vif_active_link(vif, link_conf, link_id) {
- enum ieee80211_sta_rx_bandwidth bw;
- struct iwl_mld_link *mld_link;
-
- mld_link = wiphy_dereference(mld->wiphy,
- mld_vif->link[link_id]);
-
- if (WARN_ON_ONCE(!mld_link))
- continue;
-
- bw = mld_link->rx_omi.bw_in_progress;
- if (bw)
- iwl_mld_change_link_omi_bw(mld, link_conf, bw);
- }
-}
-
static void
iwl_mld_mac80211_reconfig_complete(struct ieee80211_hw *hw,
enum ieee80211_reconfig_type reconfig_type)
case IEEE80211_RECONFIG_TYPE_RESTART:
mld->fw_status.in_hw_restart = false;
iwl_mld_send_recovery_cmd(mld, ERROR_RECOVERY_END_OF_RECOVERY);
-
- ieee80211_iterate_interfaces(mld->hw,
- IEEE80211_IFACE_ITER_NORMAL,
- iwl_mld_restart_complete_vif, mld);
-
iwl_trans_finish_sw_reset(mld->trans);
/* no need to lock, adding in parallel would schedule too */
if (!list_empty(&mld->txqs_to_add))
return -EBUSY;
}
- /*
- * If this is the first STA (i.e. the AP) it won't do
- * anything, otherwise must leave for any new STA on
- * any other interface, or for TDLS, etc.
- * Need to call this _before_ adding the STA so it can
- * look up the one STA to use to ask mac80211 to leave
- * OMI; in the unlikely event that adding the new STA
- * then fails we'll just re-enter OMI later (via the
- * statistics notification handling.)
- */
- iwl_mld_leave_omi_bw_reduction(mld);
-
ret = iwl_mld_add_sta(mld, sta, vif, STATION_TYPE_PEER);
if (ret)
return ret;
projects / nvme.git / commitdiff