]> www.infradead.org Git - users/dwmw2/linux.git/commitdiff
ASoC: mediatek: mt6358: Add "Dmic Mode Switch" kcontrol for switch DMIC mode.
authorJiaxin Yu <jiaxin.yu@mediatek.com>
Thu, 13 Jun 2024 02:07:25 +0000 (10:07 +0800)
committerMark Brown <broonie@kernel.org>
Mon, 24 Jun 2024 12:38:32 +0000 (13:38 +0100)
There are two hardware connection methods for DMICs on the MT6358. In cases
where more than two DMICs are used, we need to time-multiplex these DMICs.
Therefore, we need to dynamically switch the modes of these DMICs based on
the actual usage scenarios.

            ---- DMIC1
AU_VIN0 ---
            ---- DMIC2

AU_VIN2 --- ----DMIC3

When we want to use DMIC1/2, configure it to one-wire mode. When we want to
use DMIC1/3, configure it to two-wire mode.

Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
Link: https://patch.msgid.link/20240613020725.27874-1-jiaxin.yu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/codecs/mt6358.c

index 0284e29c11d3c8bca15bbe109c38b8dd08b51b4e..9247b90d1b99e2e3a85d4abc54f2dbf55dac6516 100644 (file)
@@ -96,7 +96,7 @@ struct mt6358_priv {
 
        int wov_enabled;
 
-       unsigned int dmic_one_wire_mode;
+       int dmic_one_wire_mode;
 };
 
 int mt6358_set_mtkaif_protocol(struct snd_soc_component *cmpnt,
@@ -577,6 +577,39 @@ static int mt6358_put_wov(struct snd_kcontrol *kcontrol,
        return 0;
 }
 
+static int mt6358_dmic_mode_get(struct snd_kcontrol *kcontrol,
+                               struct snd_ctl_elem_value *ucontrol)
+{
+       struct snd_soc_component *c = snd_soc_kcontrol_component(kcontrol);
+       struct mt6358_priv *priv = snd_soc_component_get_drvdata(c);
+
+       ucontrol->value.integer.value[0] = priv->dmic_one_wire_mode;
+       dev_dbg(priv->dev, "%s() dmic_mode = %d", __func__, priv->dmic_one_wire_mode);
+
+       return 0;
+}
+
+static int mt6358_dmic_mode_set(struct snd_kcontrol *kcontrol,
+                               struct snd_ctl_elem_value *ucontrol)
+{
+       struct snd_soc_component *c = snd_soc_kcontrol_component(kcontrol);
+       struct mt6358_priv *priv = snd_soc_component_get_drvdata(c);
+       int enabled = ucontrol->value.integer.value[0];
+
+       if (enabled < 0 || enabled > 1)
+               return -EINVAL;
+
+       if (priv->dmic_one_wire_mode != enabled) {
+               priv->dmic_one_wire_mode = enabled;
+               dev_dbg(priv->dev, "%s() dmic_mode = %d", __func__, priv->dmic_one_wire_mode);
+
+               return 1;
+       }
+       dev_dbg(priv->dev, "%s() dmic_mode = %d", __func__, priv->dmic_one_wire_mode);
+
+       return 0;
+}
+
 static const DECLARE_TLV_DB_SCALE(playback_tlv, -1000, 100, 0);
 static const DECLARE_TLV_DB_SCALE(pga_tlv, 0, 600, 0);
 
@@ -599,6 +632,9 @@ static const struct snd_kcontrol_new mt6358_snd_controls[] = {
 
        SOC_SINGLE_BOOL_EXT("Wake-on-Voice Phase2 Switch", 0,
                            mt6358_get_wov, mt6358_put_wov),
+
+       SOC_SINGLE_BOOL_EXT("Dmic Mode Switch", 0,
+                           mt6358_dmic_mode_get, mt6358_dmic_mode_set),
 };
 
 /* MUX */