staging:iio:documentation pull a few sysfs entries out of main docs.

These two attributes are only used in the one driver.  Whilst they
are fairly general I'm not entirely happy committing to them at
this stage.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/iio/Documentation/sysfs-bus-iio b/drivers/staging/iio/Documentation/sysfs-bus-iio
index eec9acbd964801404d412b7b1c12198e3ab6d426..f7de49479db3936b27833f6de179f6daac7c5824 100644 (file)
--- a/drivers/staging/iio/Documentation/sysfs-bus-iio
+++ b/drivers/staging/iio/Documentation/sysfs-bus-iio
@@ -728,24 +728,3 @@ Contact:   linux-iio@vger.kernel.org
 Description:
                This attribute is used to read the amount of quadrature error
                present in the device at a given time.
-
-What:          /sys/.../iio:deviceX/ac_excitation_en
-KernelVersion: 3.1.0
-Contact:       linux-iio@vger.kernel.org
-Description:
-               This attribute, if available, is used to enable the AC
-               excitation mode found on some converters. In ac excitation mode,
-               the polarity of the excitation voltage is reversed on
-               alternate cycles, to eliminate DC errors.
-
-What:          /sys/.../iio:deviceX/bridge_switch_en
-KernelVersion: 3.1.0
-Contact:       linux-iio@vger.kernel.org
-Description:
-               This attribute, if available, is used to close or open the
-               bridge power down switch found on some converters.
-               In bridge applications, such as strain gauges and load cells,
-               the bridge itself consumes the majority of the current in the
-               system. To minimize the current consumption of the system,
-               the bridge can be disconnected (when it is not being used
-               using the bridge_switch_en attribute.

diff --git a/drivers/staging/iio/Documentation/sysfs-bus-iio-ad7192 b/drivers/staging/iio/Documentation/sysfs-bus-iio-ad7192
new file mode 100644 (file)
index 0000000..1c35c50
--- /dev/null
+++ b/drivers/staging/iio/Documentation/sysfs-bus-iio-ad7192
@@ -0,0 +1,20 @@
+What:          /sys/.../iio:deviceX/ac_excitation_en
+KernelVersion: 3.1.0
+Contact:       linux-iio@vger.kernel.org
+Description:
+               This attribute, if available, is used to enable the AC
+               excitation mode found on some converters. In ac excitation mode,
+               the polarity of the excitation voltage is reversed on
+               alternate cycles, to eliminate DC errors.
+
+What:          /sys/.../iio:deviceX/bridge_switch_en
+KernelVersion: 3.1.0
+Contact:       linux-iio@vger.kernel.org
+Description:
+               This attribute, if available, is used to close or open the
+               bridge power down switch found on some converters.
+               In bridge applications, such as strain gauges and load cells,
+               the bridge itself consumes the majority of the current in the
+               system. To minimize the current consumption of the system,
+               the bridge can be disconnected (when it is not being used
+               using the bridge_switch_en attribute.