/* nothing to do */
}
+/* Figure out how many Ports and Queue Sets we can support. This depends on
+ * knowing our Virtual Function Resources and may be called a second time if
+ * we fall back from MSI-X to MSI Interrupt Mode.
+ */
+static void size_nports_qsets(struct adapter *adapter)
+{
+ struct vf_resources *vfres = &adapter->params.vfres;
+ unsigned int ethqsets, pmask_nports;
+
+ /* The number of "ports" which we support is equal to the number of
+ * Virtual Interfaces with which we've been provisioned.
+ */
+ adapter->params.nports = vfres->nvi;
+ if (adapter->params.nports > MAX_NPORTS) {
+ dev_warn(adapter->pdev_dev, "only using %d of %d maximum"
+ " allowed virtual interfaces\n", MAX_NPORTS,
+ adapter->params.nports);
+ adapter->params.nports = MAX_NPORTS;
+ }
+
+ /* We may have been provisioned with more VIs than the number of
+ * ports we're allowed to access (our Port Access Rights Mask).
+ * This is obviously a configuration conflict but we don't want to
+ * crash the kernel or anything silly just because of that.
+ */
+ pmask_nports = hweight32(adapter->params.vfres.pmask);
+ if (pmask_nports < adapter->params.nports) {
+ dev_warn(adapter->pdev_dev, "only using %d of %d provissioned"
+ " virtual interfaces; limited by Port Access Rights"
+ " mask %#x\n", pmask_nports, adapter->params.nports,
+ adapter->params.vfres.pmask);
+ adapter->params.nports = pmask_nports;
+ }
+
+ /* We need to reserve an Ingress Queue for the Asynchronous Firmware
+ * Event Queue. And if we're using MSI Interrupts, we'll also need to
+ * reserve an Ingress Queue for a Forwarded Interrupts.
+ *
+ * The rest of the FL/Intr-capable ingress queues will be matched up
+ * one-for-one with Ethernet/Control egress queues in order to form
+ * "Queue Sets" which will be aportioned between the "ports". For
+ * each Queue Set, we'll need the ability to allocate two Egress
+ * Contexts -- one for the Ingress Queue Free List and one for the TX
+ * Ethernet Queue.
+ *
+ * Note that even if we're currently configured to use MSI-X
+ * Interrupts (module variable msi == MSI_MSIX) we may get downgraded
+ * to MSI Interrupts if we can't get enough MSI-X Interrupts. If that
+ * happens we'll need to adjust things later.
+ */
+ ethqsets = vfres->niqflint - 1 - (msi == MSI_MSI);
+ if (vfres->nethctrl != ethqsets)
+ ethqsets = min(vfres->nethctrl, ethqsets);
+ if (vfres->neq < ethqsets*2)
+ ethqsets = vfres->neq/2;
+ if (ethqsets > MAX_ETH_QSETS)
+ ethqsets = MAX_ETH_QSETS;
+ adapter->sge.max_ethqsets = ethqsets;
+
+ if (adapter->sge.max_ethqsets < adapter->params.nports) {
+ dev_warn(adapter->pdev_dev, "only using %d of %d available"
+ " virtual interfaces (too few Queue Sets)\n",
+ adapter->sge.max_ethqsets, adapter->params.nports);
+ adapter->params.nports = adapter->sge.max_ethqsets;
+ }
+}
+
/*
* Perform early "adapter" initialization. This is where we discover what
* adapter parameters we're going to be using and initialize basic adapter
*/
static int adap_init0(struct adapter *adapter)
{
- struct vf_resources *vfres = &adapter->params.vfres;
struct sge_params *sge_params = &adapter->params.sge;
struct sge *s = &adapter->sge;
- unsigned int ethqsets;
int err;
u32 param, val = 0;
return err;
}
- /*
- * The number of "ports" which we support is equal to the number of
- * Virtual Interfaces with which we've been provisioned.
- */
- adapter->params.nports = vfres->nvi;
- if (adapter->params.nports > MAX_NPORTS) {
- dev_warn(adapter->pdev_dev, "only using %d of %d allowed"
- " virtual interfaces\n", MAX_NPORTS,
- adapter->params.nports);
- adapter->params.nports = MAX_NPORTS;
- }
-
- /*
- * We need to reserve a number of the ingress queues with Free List
- * and Interrupt capabilities for special interrupt purposes (like
- * asynchronous firmware messages, or forwarded interrupts if we're
- * using MSI). The rest of the FL/Intr-capable ingress queues will be
- * matched up one-for-one with Ethernet/Control egress queues in order
- * to form "Queue Sets" which will be aportioned between the "ports".
- * For each Queue Set, we'll need the ability to allocate two Egress
- * Contexts -- one for the Ingress Queue Free List and one for the TX
- * Ethernet Queue.
- */
- ethqsets = vfres->niqflint - INGQ_EXTRAS;
- if (vfres->nethctrl != ethqsets) {
- dev_warn(adapter->pdev_dev, "unequal number of [available]"
- " ingress/egress queues (%d/%d); using minimum for"
- " number of Queue Sets\n", ethqsets, vfres->nethctrl);
- ethqsets = min(vfres->nethctrl, ethqsets);
- }
- if (vfres->neq < ethqsets*2) {
- dev_warn(adapter->pdev_dev, "Not enough Egress Contexts (%d)"
- " to support Queue Sets (%d); reducing allowed Queue"
- " Sets\n", vfres->neq, ethqsets);
- ethqsets = vfres->neq/2;
- }
- if (ethqsets > MAX_ETH_QSETS) {
- dev_warn(adapter->pdev_dev, "only using %d of %d allowed Queue"
- " Sets\n", MAX_ETH_QSETS, adapter->sge.max_ethqsets);
- ethqsets = MAX_ETH_QSETS;
- }
- if (vfres->niq != 0 || vfres->neq > ethqsets*2) {
- dev_warn(adapter->pdev_dev, "unused resources niq/neq (%d/%d)"
- " ignored\n", vfres->niq, vfres->neq - ethqsets*2);
- }
- adapter->sge.max_ethqsets = ethqsets;
-
- /*
- * Check for various parameter sanity issues. Most checks simply
- * result in us using fewer resources than our provissioning but we
- * do need at least one "port" with which to work ...
- */
- if (adapter->sge.max_ethqsets < adapter->params.nports) {
- dev_warn(adapter->pdev_dev, "only using %d of %d available"
- " virtual interfaces (too few Queue Sets)\n",
- adapter->sge.max_ethqsets, adapter->params.nports);
- adapter->params.nports = adapter->sge.max_ethqsets;
- }
- if (adapter->params.nports == 0) {
+ /* Check for various parameter sanity issues */
+ if (adapter->params.vfres.nvi == 0) {
dev_err(adapter->pdev_dev, "no virtual interfaces configured/"
"usable!\n");
return -EINVAL;
}
+
+ /* Initialize nports and max_ethqsets now that we have our Virtual
+ * Function Resources.
+ */
+ size_nports_qsets(adapter);
+
return 0;
}
if (msi == MSI_MSIX && enable_msix(adapter) == 0)
adapter->flags |= USING_MSIX;
else {
+ if (msi == MSI_MSIX) {
+ dev_info(adapter->pdev_dev,
+ "Unable to use MSI-X Interrupts; falling "
+ "back to MSI Interrupts\n");
+
+ /* We're going to need a Forwarded Interrupt Queue so
+ * that may cut into how many Queue Sets we can
+ * support.
+ */
+ msi = MSI_MSI;
+ size_nports_qsets(adapter);
+ }
err = pci_enable_msi(pdev);
if (err) {
- dev_err(&pdev->dev, "Unable to allocate %s interrupts;"
- " err=%d\n",
- msi == MSI_MSIX ? "MSI-X or MSI" : "MSI", err);
+ dev_err(&pdev->dev, "Unable to allocate MSI Interrupts;"
+ " err=%d\n", err);
goto err_free_dev;
}
adapter->flags |= USING_MSI;
}
+ /* Now that we know how many "ports" we have and what interrupt
+ * mechanism we're going to use, we can configure our queue resources.
+ */
+ cfg_queues(adapter);
+
/*
* The "card" is now ready to go. If any errors occur during device
* registration we do not fail the whole "card" but rather proceed
setup_debugfs(adapter);
}
- /*
- * Now that we know how many "ports" we have and what their types are,
- * and how many Queue Sets we can support, we can configure our queue
- * resources.
- */
- cfg_queues(adapter);
-
/*
* Print a short notice on the existence and configuration of the new
* VF network device ...
projects / users / willy / pagecache.git / commitdiff