arm64: dts: meson: Add capacity-dmips-mhz attributes to GXM

GXM (S912) is a big-little design with CPUs 0-3 clocked at 1.5GHz
and CPUs 4-7 at 1.0GHz. Adding capacity-dmips-mhz attributes allows
the scheduler to factor the different clock speeds into capacity
calculations and prefer the higher-clocked cluster to improve
overall performance.

This was inspired by the similar change for G12B [0] boards. The
diference here is that all cores are A53's so the same dmips-mhz
value is used.

VIM2:~ # cat /sys/devices/system/cpu/cpu*/cpufreq/scaling_cur_freq
1512000
1512000
1512000
1512000
1000000
1000000
1000000
1000000

before:

VIM2:~ # cat /sys/devices/system/cpu/cpu*/cpu_capacity
1024
1024
1024
1024
1024
1024
1024
1024

after:

VIM2:~ # cat /sys/devices/system/cpu/cpu*/cpu_capacity
1024
1024
1024
1024
677
677
677
677

The after value matches my table-napkin calculation:

(1000000 / 1512000 = 0.661) * 1024 = 677

[0] https://github.com/torvalds/linux/commit/6eeaf4d2452ec8b1ece58776812140734fc2e088

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20201124121740.25704-1-christianshewitt@gmail.com

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
index fe4145112295cb720377264fe1bb836da08e034c..411cc312fc62bdf929b6992f2c3687c7dffda397 100644 (file)
--- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
@@ -42,11 +42,28 @@
                        };
                };
 
+               cpu0: cpu@0 {
+                       capacity-dmips-mhz = <1024>;
+               };
+
+               cpu1: cpu@1 {
+                       capacity-dmips-mhz = <1024>;
+               };
+
+               cpu2: cpu@2 {
+                       capacity-dmips-mhz = <1024>;
+               };
+
+               cpu3: cpu@3 {
+                       capacity-dmips-mhz = <1024>;
+               };
+
                cpu4: cpu@100 {
                        device_type = "cpu";
                        compatible = "arm,cortex-a53";
                        reg = <0x0 0x100>;
                        enable-method = "psci";
+                       capacity-dmips-mhz = <1024>;
                        next-level-cache = <&l2>;
                        clocks = <&scpi_dvfs 1>;
                        #cooling-cells = <2>;
@@ -57,6 +74,7 @@
                        compatible = "arm,cortex-a53";
                        reg = <0x0 0x101>;
                        enable-method = "psci";
+                       capacity-dmips-mhz = <1024>;
                        next-level-cache = <&l2>;
                        clocks = <&scpi_dvfs 1>;
                        #cooling-cells = <2>;
@@ -67,6 +85,7 @@
                        compatible = "arm,cortex-a53";
                        reg = <0x0 0x102>;
                        enable-method = "psci";
+                       capacity-dmips-mhz = <1024>;
                        next-level-cache = <&l2>;
                        clocks = <&scpi_dvfs 1>;
                        #cooling-cells = <2>;
@@ -77,6 +96,7 @@
                        compatible = "arm,cortex-a53";
                        reg = <0x0 0x103>;
                        enable-method = "psci";
+                       capacity-dmips-mhz = <1024>;
                        next-level-cache = <&l2>;
                        clocks = <&scpi_dvfs 1>;
                        #cooling-cells = <2>;