#define SF_CURR 1000 /* milliamperes */
#define SF_VOLTAGE 1000 /* millivolts */
#define SF_ENERGY 1000000 /* microjoules */
+#define SF_TIME 1000 /* milliseconds */
/**
* struct xe_hwmon_energy_info - to accumulate energy
int scl_shift_power;
/** @scl_shift_energy: pkg energy unit */
int scl_shift_energy;
+ /** @scl_shift_time: pkg time unit */
+ int scl_shift_time;
/** @ei: Energy info for energy1_input */
struct xe_hwmon_energy_info ei;
};
hwmon->scl_shift_energy);
}
+static ssize_t
+xe_hwmon_power1_max_interval_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct xe_hwmon *hwmon = dev_get_drvdata(dev);
+ u32 x, y, x_w = 2; /* 2 bits */
+ u64 r, tau4, out;
+
+ xe_device_mem_access_get(gt_to_xe(hwmon->gt));
+
+ mutex_lock(&hwmon->hwmon_lock);
+
+ xe_hwmon_process_reg(hwmon, REG_PKG_RAPL_LIMIT,
+ REG_READ32, &r, 0, 0);
+
+ mutex_unlock(&hwmon->hwmon_lock);
+
+ xe_device_mem_access_put(gt_to_xe(hwmon->gt));
+
+ x = REG_FIELD_GET(PKG_PWR_LIM_1_TIME_X, r);
+ y = REG_FIELD_GET(PKG_PWR_LIM_1_TIME_Y, r);
+
+ /*
+ * tau = 1.x * power(2,y), x = bits(23:22), y = bits(21:17)
+ * = (4 | x) << (y - 2)
+ *
+ * Here (y - 2) ensures a 1.x fixed point representation of 1.x
+ * As x is 2 bits so 1.x can be 1.0, 1.25, 1.50, 1.75
+ *
+ * As y can be < 2, we compute tau4 = (4 | x) << y
+ * and then add 2 when doing the final right shift to account for units
+ */
+ tau4 = ((1 << x_w) | x) << y;
+
+ /* val in hwmon interface units (millisec) */
+ out = mul_u64_u32_shr(tau4, SF_TIME, hwmon->scl_shift_time + x_w);
+
+ return sysfs_emit(buf, "%llu\n", out);
+}
+
+static ssize_t
+xe_hwmon_power1_max_interval_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct xe_hwmon *hwmon = dev_get_drvdata(dev);
+ u32 x, y, rxy, x_w = 2; /* 2 bits */
+ u64 tau4, r, max_win;
+ unsigned long val;
+ int ret;
+
+ ret = kstrtoul(buf, 0, &val);
+ if (ret)
+ return ret;
+
+ /*
+ * Max HW supported tau in '1.x * power(2,y)' format, x = 0, y = 0x12.
+ * The hwmon->scl_shift_time default of 0xa results in a max tau of 256 seconds.
+ *
+ * The ideal scenario is for PKG_MAX_WIN to be read from the PKG_PWR_SKU register.
+ * However, it is observed that existing discrete GPUs does not provide correct
+ * PKG_MAX_WIN value, therefore a using default constant value. For future discrete GPUs
+ * this may get resolved, in which case PKG_MAX_WIN should be obtained from PKG_PWR_SKU.
+ */
+#define PKG_MAX_WIN_DEFAULT 0x12ull
+
+ /*
+ * val must be < max in hwmon interface units. The steps below are
+ * explained in xe_hwmon_power1_max_interval_show()
+ */
+ r = FIELD_PREP(PKG_MAX_WIN, PKG_MAX_WIN_DEFAULT);
+ x = REG_FIELD_GET(PKG_MAX_WIN_X, r);
+ y = REG_FIELD_GET(PKG_MAX_WIN_Y, r);
+ tau4 = ((1 << x_w) | x) << y;
+ max_win = mul_u64_u32_shr(tau4, SF_TIME, hwmon->scl_shift_time + x_w);
+
+ if (val > max_win)
+ return -EINVAL;
+
+ /* val in hw units */
+ val = DIV_ROUND_CLOSEST_ULL((u64)val << hwmon->scl_shift_time, SF_TIME);
+
+ /*
+ * Convert val to 1.x * power(2,y)
+ * y = ilog2(val)
+ * x = (val - (1 << y)) >> (y - 2)
+ */
+ if (!val) {
+ y = 0;
+ x = 0;
+ } else {
+ y = ilog2(val);
+ x = (val - (1ul << y)) << x_w >> y;
+ }
+
+ rxy = REG_FIELD_PREP(PKG_PWR_LIM_1_TIME_X, x) | REG_FIELD_PREP(PKG_PWR_LIM_1_TIME_Y, y);
+
+ xe_device_mem_access_get(gt_to_xe(hwmon->gt));
+
+ mutex_lock(&hwmon->hwmon_lock);
+
+ xe_hwmon_process_reg(hwmon, REG_PKG_RAPL_LIMIT, REG_RMW32, (u64 *)&r,
+ PKG_PWR_LIM_1_TIME, rxy);
+
+ mutex_unlock(&hwmon->hwmon_lock);
+
+ xe_device_mem_access_put(gt_to_xe(hwmon->gt));
+
+ return count;
+}
+
+static SENSOR_DEVICE_ATTR(power1_max_interval, 0664,
+ xe_hwmon_power1_max_interval_show,
+ xe_hwmon_power1_max_interval_store, 0);
+
+static struct attribute *hwmon_attributes[] = {
+ &sensor_dev_attr_power1_max_interval.dev_attr.attr,
+ NULL
+};
+
+static umode_t xe_hwmon_attributes_visible(struct kobject *kobj,
+ struct attribute *attr, int index)
+{
+ struct device *dev = kobj_to_dev(kobj);
+ struct xe_hwmon *hwmon = dev_get_drvdata(dev);
+ int ret = 0;
+
+ xe_device_mem_access_get(gt_to_xe(hwmon->gt));
+
+ if (attr == &sensor_dev_attr_power1_max_interval.dev_attr.attr)
+ ret = xe_hwmon_get_reg(hwmon, REG_PKG_RAPL_LIMIT) ? attr->mode : 0;
+
+ xe_device_mem_access_put(gt_to_xe(hwmon->gt));
+
+ return ret;
+}
+
+static const struct attribute_group hwmon_attrgroup = {
+ .attrs = hwmon_attributes,
+ .is_visible = xe_hwmon_attributes_visible,
+};
+
+static const struct attribute_group *hwmon_groups[] = {
+ &hwmon_attrgroup,
+ NULL
+};
+
static const struct hwmon_channel_info *hwmon_info[] = {
HWMON_CHANNEL_INFO(power, HWMON_P_MAX | HWMON_P_RATED_MAX | HWMON_P_CRIT),
HWMON_CHANNEL_INFO(curr, HWMON_C_CRIT),
REG_READ32, &val_sku_unit, 0, 0);
hwmon->scl_shift_power = REG_FIELD_GET(PKG_PWR_UNIT, val_sku_unit);
hwmon->scl_shift_energy = REG_FIELD_GET(PKG_ENERGY_UNIT, val_sku_unit);
+ hwmon->scl_shift_time = REG_FIELD_GET(PKG_TIME_UNIT, val_sku_unit);
}
/*
/* hwmon_dev points to device hwmon<i> */
hwmon->hwmon_dev = devm_hwmon_device_register_with_info(dev, "xe", hwmon,
&hwmon_chip_info,
- NULL);
+ hwmon_groups);
+
if (IS_ERR(hwmon->hwmon_dev)) {
drm_warn(&xe->drm, "Failed to register xe hwmon (%pe)\n", hwmon->hwmon_dev);
xe->hwmon = NULL;
projects / users / jedix / linux-maple.git / commitdiff