powerpc/dts/virtex440: Add ethernet phy to virtex440-ml507 board

This adds the marvel phy which is present on the ml507 board.
Without this ethtool causes kernel-oopses.

Tested on ml507 board.

Signed-off-by: Gernot Vormayr <gvormayr@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

diff --git a/arch/powerpc/boot/dts/virtex440-ml507.dts b/arch/powerpc/boot/dts/virtex440-ml507.dts
index 52d8c1ad26a153d9a0782337e4a86ba86aec19c6..fc7073bc547efaa4e196a80d08be24155fea9695 100644 (file)
--- a/arch/powerpc/boot/dts/virtex440-ml507.dts
+++ b/arch/powerpc/boot/dts/virtex440-ml507.dts
@@ -272,6 +272,12 @@
                                xlnx,temac-type = <0>;
                                xlnx,txcsum = <1>;
                                xlnx,txfifo = <0x1000>;
+                                phy-handle = <&phy7>;
+                                clock-frequency = <100000000>;
+                                phy7: phy@7 {
+                                          compatible = "marvell,88e1111";
+                                          reg = <7>;
+                                } ;
                        } ;
                } ;
                IIC_EEPROM: i2c@81600000 {