arm64: dts: qcom: apq8016-sbc: Remove properties that are already default

apq8016-sbc.dtsi overrides several properties that are already the
default in msm8916.dtsi. Remove these to simplify the device tree
a bit.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200720085406.6716-2-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 8665d3464e9b4d217bc922f37160b43537f24cc9..cb9c70a1532adf91d737280bb9f4862228646b8d 100644 (file)
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -387,7 +387,6 @@
                        adp-disable;
                        hnp-disable;
                        srp-disable;
-                       dr_mode = "otg";
                        pinctrl-names = "default", "device";
                        pinctrl-0 = <&usb_sw_sel_pm &usb_hub_reset_pm>;
                        pinctrl-1 = <&usb_sw_sel_pm_device &usb_hub_reset_pm_device>;
@@ -405,15 +404,7 @@
                };
 
                mdss@1a00000 {
-                       status = "okay";
-
-                       mdp@1a01000 {
-                               status = "okay";
-                       };
-
                        dsi@1a98000 {
-                               status = "okay";
-
                                vdda-supply = <&pm8916_l2>;
                                vddio-supply = <&pm8916_l6>;
 
@@ -428,16 +419,10 @@
                        };
 
                        dsi-phy@1a98300 {
-                               status = "okay";
-
                                vddio-supply = <&pm8916_l6>;
                        };
                };
 
-               lpass_codec: codec{
-                       status = "okay";
-               };
-
                /*
                Internal Codec
                        playback - Primary MI2S
@@ -587,8 +572,6 @@
 &camss {
        status = "okay";
        ports {
-               #address-cells = <1>;
-               #size-cells = <0>;
                port@0 {
                        reg = <0>;
                        csiphy0_ep: endpoint {
@@ -651,7 +634,6 @@
 };
 
 &wcd_codec {
-       status = "okay";
        clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
        clock-names = "mclk";
        qcom,mbhc-vthreshold-low = <75 150 237 450 500>;