ARM: dts: iwg20d-q7: Enable HS-USB

Enable HS-USB device for the iWave G20D-Q7 carrier board based on
RZ/G1M.
Also disable the host mode support on usb otg port by default to avoid
pin conflicts.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
index 1c072c0a4888baa0970fb25bfe96682287ca9a4e..efd8af9242d12fcfc909d33bd99e8729acf2cfee 100644 (file)
--- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi
+++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
@@ -58,6 +58,12 @@
        };
 };
 
+&hsusb {
+       status = "okay";
+       pinctrl-0 = <&usb0_pins>;
+       pinctrl-names = "default";
+};
+
 &i2c2 {
        pinctrl-0 = <&i2c2_pins>;
        pinctrl-names = "default";
@@ -72,7 +78,6 @@
 };
 
 &pci0 {
-       status = "okay";
        pinctrl-0 = <&usb0_pins>;
        pinctrl-names = "default";
 };