ARM: dts: BCM5301X: define RTL8365MB switch on Asus RT-AC88U

Define the Realtek RTL8365MB switch without interrupt support on the device
tree of Asus RT-AC88U.

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

diff --git a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
index b0cee1d87600e41f710e8eafe6af5f656ef753e1..16dea851719f25c6db33da9b1614be9f8309b4eb 100644 (file)
--- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
+++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
@@ -93,6 +93,83 @@
                        gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
                };
        };
+
+       switch {
+               compatible = "realtek,rtl8365mb";
+               /* 7 = MDIO (has input reads), 6 = MDC (clock, output only) */
+               mdc-gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
+               mdio-gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
+               reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+               realtek,disable-leds;
+               dsa,member = <1 0>;
+
+               ports {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <0>;
+
+                       port@0 {
+                               reg = <0>;
+                               label = "lan5";
+                               phy-handle = <&ethphy0>;
+                       };
+
+                       port@1 {
+                               reg = <1>;
+                               label = "lan6";
+                               phy-handle = <&ethphy1>;
+                       };
+
+                       port@2 {
+                               reg = <2>;
+                               label = "lan7";
+                               phy-handle = <&ethphy2>;
+                       };
+
+                       port@3 {
+                               reg = <3>;
+                               label = "lan8";
+                               phy-handle = <&ethphy3>;
+                       };
+
+                       port@6 {
+                               reg = <6>;
+                               label = "cpu";
+                               ethernet = <&sw0_p5>;
+                               phy-mode = "rgmii";
+                               tx-internal-delay-ps = <2000>;
+                               rx-internal-delay-ps = <2000>;
+
+                               fixed-link {
+                                       speed = <1000>;
+                                       full-duplex;
+                                       pause;
+                               };
+                       };
+               };
+
+               mdio {
+                       compatible = "realtek,smi-mdio";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       ethphy0: ethernet-phy@0 {
+                               reg = <0>;
+                       };
+
+                       ethphy1: ethernet-phy@1 {
+                               reg = <1>;
+                       };
+
+                       ethphy2: ethernet-phy@2 {
+                               reg = <2>;
+                       };
+
+                       ethphy3: ethernet-phy@3 {
+                               reg = <3>;
+                       };
+               };
+       };
 };
 
 &srab {