net/mlx5e: Mutually exclude setting of TX-port-TS and MQPRIO in channel mode

TX-port-TS hijacks the PTP traffic to a specific HW TX-queue. This
conflicts with MQPRIO in channel mode, which specifies explicitly which
TC accepts the packet. This patch mutually excludes the above
configuration.

Fixes: ec60c4581bd9 ("net/mlx5e: Support MQPRIO channel mode")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
index 306fb5d6a36d3582ad1439cb8fca35830b004e5e..9d451b8ee467c7b41d784093d933cd2b4f82fb05 100644 (file)
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
@@ -2036,6 +2036,17 @@ static int set_pflag_tx_port_ts(struct net_device *netdev, bool enable)
        }
 
        new_params = priv->channels.params;
+       /* Don't allow enabling TX-port-TS if MQPRIO mode channel  offload is
+        * active, since it defines explicitly which TC accepts the packet.
+        * This conflicts with TX-port-TS hijacking the PTP traffic to a specific
+        * HW TX-queue.
+        */
+       if (enable && new_params.mqprio.mode == TC_MQPRIO_MODE_CHANNEL) {
+               netdev_err(priv->netdev,
+                          "%s: MQPRIO mode channel offload is active, cannot set the TX-port-TS\n",
+                          __func__);
+               return -EINVAL;
+       }
        MLX5E_SET_PFLAG(&new_params, MLX5E_PFLAG_TX_PORT_TS, enable);
        /* No need to verify SQ stop room as
         * ptpsq.txqsq.stop_room <= generic_sq->stop_room, and both

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index 0390395f421f5d3a2c5c7d9772ba88e56245c224..0c5197f9cea395acc3c2141e06a3e793facf5404 100644 (file)
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -2945,9 +2945,17 @@ static int mlx5e_mqprio_channel_validate(struct mlx5e_priv *priv,
                                         struct tc_mqprio_qopt_offload *mqprio)
 {
        struct net_device *netdev = priv->netdev;
+       struct mlx5e_ptp *ptp_channel;
        int agg_count = 0;
        int i;
 
+       ptp_channel = priv->channels.ptp;
+       if (ptp_channel && test_bit(MLX5E_PTP_STATE_TX, ptp_channel->state)) {
+               netdev_err(netdev,
+                          "Cannot activate MQPRIO mode channel since it conflicts with TX port TS\n");
+               return -EINVAL;
+       }
+
        if (mqprio->qopt.offset[0] != 0 || mqprio->qopt.num_tc < 1 ||
            mqprio->qopt.num_tc > MLX5E_MAX_NUM_MQPRIO_CH_TC)
                return -EINVAL;