media: i2c: ov9282: Add support for regulators.

The sensor takes 3 supply rails - AVDD, DVDD, and DOVDD.

Add hooks into the regulator framework for each of these
regulators.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

diff --git a/drivers/media/i2c/ov9282.c b/drivers/media/i2c/ov9282.c
index f2ec92deb5eca8ae42b99c47841aef303f9be646..4ee93daa23c6cdbe7313623f85485bcabe5178b7 100644 (file)
--- a/drivers/media/i2c/ov9282.c
+++ b/drivers/media/i2c/ov9282.c
@@ -11,6 +11,7 @@
 #include <linux/i2c.h>
 #include <linux/module.h>
 #include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
 
 #include <media/v4l2-ctrls.h>
 #include <media/v4l2-event.h>
@@ -91,6 +92,14 @@
 #define OV9282_REG_MIN         0x00
 #define OV9282_REG_MAX         0xfffff
 
+static const char * const ov9282_supply_names[] = {
+       "avdd",         /* Analog power */
+       "dovdd",        /* Digital I/O power */
+       "dvdd",         /* Digital core power */
+};
+
+#define OV9282_NUM_SUPPLIES ARRAY_SIZE(ov9282_supply_names)
+
 /**
  * struct ov9282_reg - ov9282 sensor register
  * @address: Register address
@@ -162,6 +171,7 @@ struct ov9282 {
        struct media_pad pad;
        struct gpio_desc *reset_gpio;
        struct clk *inclk;
+       struct regulator_bulk_data supplies[OV9282_NUM_SUPPLIES];
        struct v4l2_ctrl_handler ctrl_handler;
        struct v4l2_ctrl *link_freq_ctrl;
        struct v4l2_ctrl *hblank_ctrl;
@@ -1081,6 +1091,18 @@ static int ov9282_detect(struct ov9282 *ov9282)
        return 0;
 }
 
+static int ov9282_configure_regulators(struct ov9282 *ov9282)
+{
+       unsigned int i;
+
+       for (i = 0; i < OV9282_NUM_SUPPLIES; i++)
+               ov9282->supplies[i].supply = ov9282_supply_names[i];
+
+       return devm_regulator_bulk_get(ov9282->dev,
+                                      OV9282_NUM_SUPPLIES,
+                                      ov9282->supplies);
+}
+
 /**
  * ov9282_parse_hw_config() - Parse HW configuration and check if supported
  * @ov9282: pointer to ov9282 device
@@ -1117,6 +1139,12 @@ static int ov9282_parse_hw_config(struct ov9282 *ov9282)
                return PTR_ERR(ov9282->inclk);
        }
 
+       ret = ov9282_configure_regulators(ov9282);
+       if (ret) {
+               dev_err(ov9282->dev, "Failed to get power regulators\n");
+               return ret;
+       }
+
        rate = clk_get_rate(ov9282->inclk);
        if (rate != OV9282_INCLK_RATE) {
                dev_err(ov9282->dev, "inclk frequency mismatch");
@@ -1198,6 +1226,12 @@ static int ov9282_power_on(struct device *dev)
        struct ov9282 *ov9282 = to_ov9282(sd);
        int ret;
 
+       ret = regulator_bulk_enable(OV9282_NUM_SUPPLIES, ov9282->supplies);
+       if (ret < 0) {
+               dev_err(dev, "Failed to enable regulators\n");
+               return ret;
+       }
+
        usleep_range(400, 600);
 
        gpiod_set_value_cansleep(ov9282->reset_gpio, 1);
@@ -1223,6 +1257,8 @@ static int ov9282_power_on(struct device *dev)
 error_reset:
        gpiod_set_value_cansleep(ov9282->reset_gpio, 0);
 
+       regulator_bulk_disable(OV9282_NUM_SUPPLIES, ov9282->supplies);
+
        return ret;
 }
 
@@ -1241,6 +1277,8 @@ static int ov9282_power_off(struct device *dev)
 
        clk_disable_unprepare(ov9282->inclk);
 
+       regulator_bulk_disable(OV9282_NUM_SUPPLIES, ov9282->supplies);
+
        return 0;
 }