[media] dvb: nxt200x: apply levels to the printk()s

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

diff --git a/drivers/media/dvb/frontends/nxt200x.c b/drivers/media/dvb/frontends/nxt200x.c
index 49ca78d883b18031ec110a6329be86bf49c9acbe..03af52ec2c5818f8b6e4bed5286389acc75b9984 100644 (file)
--- a/drivers/media/dvb/frontends/nxt200x.c
+++ b/drivers/media/dvb/frontends/nxt200x.c
@@ -37,6 +37,8 @@
  * /usr/lib/hotplug/firmware/ or /lib/firmware/
  * (depending on configuration of firmware hotplug).
  */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #define NXT2002_DEFAULT_FIRMWARE "dvb-fe-nxt2002.fw"
 #define NXT2004_DEFAULT_FIRMWARE "dvb-fe-nxt2004.fw"
 #define CRC_CCIT_MASK 0x1021
@@ -62,10 +64,7 @@ struct nxt200x_state {
 };
 
 static int debug;
-#define dprintk(args...) \
-       do { \
-               if (debug) printk(KERN_DEBUG "nxt200x: " args); \
-       } while (0)
+#define dprintk(args...)       do { if (debug) pr_debug(args); } while (0)
 
 static int i2c_writebytes (struct nxt200x_state* state, u8 addr, u8 *buf, u8 len)
 {
@@ -73,7 +72,7 @@ static int i2c_writebytes (struct nxt200x_state* state, u8 addr, u8 *buf, u8 len
        struct i2c_msg msg = { .addr = addr, .flags = 0, .buf = buf, .len = len };
 
        if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
-               printk (KERN_WARNING "nxt200x: %s: i2c write error (addr 0x%02x, err == %i)\n",
+               pr_warn("%s: i2c write error (addr 0x%02x, err == %i)\n",
                        __func__, addr, err);
                return -EREMOTEIO;
        }
@@ -86,7 +85,7 @@ static int i2c_readbytes(struct nxt200x_state *state, u8 addr, u8 *buf, u8 len)
        struct i2c_msg msg = { .addr = addr, .flags = I2C_M_RD, .buf = buf, .len = len };
 
        if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
-               printk (KERN_WARNING "nxt200x: %s: i2c read error (addr 0x%02x, err == %i)\n",
+               pr_warn("%s: i2c read error (addr 0x%02x, err == %i)\n",
                        __func__, addr, err);
                return -EREMOTEIO;
        }
@@ -104,7 +103,7 @@ static int nxt200x_writebytes (struct nxt200x_state* state, u8 reg,
        memcpy(&buf2[1], buf, len);
 
        if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
-               printk (KERN_WARNING "nxt200x: %s: i2c write error (addr 0x%02x, err == %i)\n",
+               pr_warn("%s: i2c write error (addr 0x%02x, err == %i)\n",
                        __func__, state->config->demod_address, err);
                return -EREMOTEIO;
        }
@@ -121,7 +120,7 @@ static int nxt200x_readbytes(struct nxt200x_state *state, u8 reg, u8 *buf, u8 le
        int err;
 
        if ((err = i2c_transfer (state->i2c, msg, 2)) != 2) {
-               printk (KERN_WARNING "nxt200x: %s: i2c read error (addr 0x%02x, err == %i)\n",
+               pr_warn("%s: i2c read error (addr 0x%02x, err == %i)\n",
                        __func__, state->config->demod_address, err);
                return -EREMOTEIO;
        }
@@ -199,7 +198,7 @@ static int nxt200x_writereg_multibyte (struct nxt200x_state* state, u8 reg, u8*
                        break;
        }
 
-       printk(KERN_WARNING "nxt200x: Error writing multireg register 0x%02X\n",reg);
+       pr_warn("Error writing multireg register 0x%02X\n", reg);
 
        return 0;
 }
@@ -281,7 +280,8 @@ static void nxt200x_microcontroller_stop (struct nxt200x_state* state)
                counter++;
        }
 
-       printk(KERN_WARNING "nxt200x: Timeout waiting for nxt200x to stop. This is ok after firmware upload.\n");
+       pr_warn("Timeout waiting for nxt200x to stop. This is ok after "
+               "firmware upload.\n");
        return;
 }
 
@@ -320,7 +320,7 @@ static void nxt2004_microcontroller_init (struct nxt200x_state* state)
                counter++;
        }
 
-       printk(KERN_WARNING "nxt200x: Timeout waiting for nxt2004 to init.\n");
+       pr_warn("Timeout waiting for nxt2004 to init.\n");
 
        return;
 }
@@ -338,7 +338,7 @@ static int nxt200x_writetuner (struct nxt200x_state* state, u8* data)
        switch (state->demod_chip) {
                case NXT2004:
                        if (i2c_writebytes(state, data[0], data+1, 4))
-                               printk(KERN_WARNING "nxt200x: error writing to tuner\n");
+                               pr_warn("error writing to tuner\n");
                        /* wait until we have a lock */
                        while (count < 20) {
                                i2c_readbytes(state, data[0], &buf, 1);
@@ -347,7 +347,7 @@ static int nxt200x_writetuner (struct nxt200x_state* state, u8* data)
                                msleep(100);
                                count++;
                        }
-                       printk("nxt2004: timeout waiting for tuner lock\n");
+                       pr_warn("timeout waiting for tuner lock\n");
                        break;
                case NXT2002:
                        /* set the i2c transfer speed to the tuner */
@@ -376,7 +376,7 @@ static int nxt200x_writetuner (struct nxt200x_state* state, u8* data)
                                msleep(100);
                                count++;
                        }
-                       printk("nxt2002: timeout error writing tuner\n");
+                       pr_warn("timeout error writing to tuner\n");
                        break;
                default:
                        return -EINVAL;
@@ -878,22 +878,24 @@ static int nxt2002_init(struct dvb_frontend* fe)
        u8 buf[2];
 
        /* request the firmware, this will block until someone uploads it */
-       printk("nxt2002: Waiting for firmware upload (%s)...\n", NXT2002_DEFAULT_FIRMWARE);
+       pr_debug("%s: Waiting for firmware upload (%s)...\n",
+                __func__, NXT2002_DEFAULT_FIRMWARE);
        ret = request_firmware(&fw, NXT2002_DEFAULT_FIRMWARE,
                               state->i2c->dev.parent);
-       printk("nxt2002: Waiting for firmware upload(2)...\n");
+       pr_debug("%s: Waiting for firmware upload(2)...\n", __func__);
        if (ret) {
-               printk("nxt2002: No firmware uploaded (timeout or file not found?)\n");
+               pr_err("%s: No firmware uploaded (timeout or file not found?)"
+                      "\n", __func__);
                return ret;
        }
 
        ret = nxt2002_load_firmware(fe, fw);
        release_firmware(fw);
        if (ret) {
-               printk("nxt2002: Writing firmware to device failed\n");
+               pr_err("%s: Writing firmware to device failed\n", __func__);
                return ret;
        }
-       printk("nxt2002: Firmware upload complete\n");
+       pr_info("%s: Firmware upload complete\n", __func__);
 
        /* Put the micro into reset */
        nxt200x_microcontroller_stop(state);
@@ -943,22 +945,24 @@ static int nxt2004_init(struct dvb_frontend* fe)
        nxt200x_writebytes(state, 0x1E, buf, 1);
 
        /* request the firmware, this will block until someone uploads it */
-       printk("nxt2004: Waiting for firmware upload (%s)...\n", NXT2004_DEFAULT_FIRMWARE);
+       pr_debug("%s: Waiting for firmware upload (%s)...\n",
+                __func__, NXT2004_DEFAULT_FIRMWARE);
        ret = request_firmware(&fw, NXT2004_DEFAULT_FIRMWARE,
                               state->i2c->dev.parent);
-       printk("nxt2004: Waiting for firmware upload(2)...\n");
+       pr_debug("%s: Waiting for firmware upload(2)...\n", __func__);
        if (ret) {
-               printk("nxt2004: No firmware uploaded (timeout or file not found?)\n");
+               pr_err("%s: No firmware uploaded (timeout or file not found?)"
+                      "\n", __func__);
                return ret;
        }
 
        ret = nxt2004_load_firmware(fe, fw);
        release_firmware(fw);
        if (ret) {
-               printk("nxt2004: Writing firmware to device failed\n");
+               pr_err("%s: Writing firmware to device failed\n", __func__);
                return ret;
        }
-       printk("nxt2004: Firmware upload complete\n");
+       pr_info("%s: Firmware upload complete\n", __func__);
 
        /* ensure transfer is complete */
        buf[0] = 0x01;
@@ -1164,11 +1168,11 @@ struct dvb_frontend* nxt200x_attach(const struct nxt200x_config* config,
        switch (buf[0]) {
                case 0x04:
                        state->demod_chip = NXT2002;
-                       printk("nxt200x: NXT2002 Detected\n");
+                       pr_info("NXT2002 Detected\n");
                        break;
                case 0x05:
                        state->demod_chip = NXT2004;
-                       printk("nxt200x: NXT2004 Detected\n");
+                       pr_info("NXT2004 Detected\n");
                        break;
                default:
                        goto error;