i2c: iproc: Refactor prototype and remove redundant error checks

The bcm_iproc_i2c_init() always returns 0. As a result, there
is no need to check its return value or handle errors.

This patch changes the prototype of bcm_iproc_i2c_init() to
return void and removes the redundant error handling code after
calls to bcm_iproc_i2c_init() in both the bcm_iproc_i2c_probe()
and bcm_iproc_i2c_resume().

Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Ray Jui <ray.jui@broadcom.com>
Link: https://lore.kernel.org/r/20250121084818.2719-1-vulab@iscas.ac.cn
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

diff --git a/drivers/i2c/busses/i2c-bcm-iproc.c b/drivers/i2c/busses/i2c-bcm-iproc.c
index 15b632a146e1e257671d45573ce1a081588c9cc6..332a0fcca28d001c0b454a717d1569a93644ee40 100644 (file)
--- a/drivers/i2c/busses/i2c-bcm-iproc.c
+++ b/drivers/i2c/busses/i2c-bcm-iproc.c
@@ -678,7 +678,7 @@ static irqreturn_t bcm_iproc_i2c_isr(int irq, void *data)
        return IRQ_HANDLED;
 }
 
-static int bcm_iproc_i2c_init(struct bcm_iproc_i2c_dev *iproc_i2c)
+static void bcm_iproc_i2c_init(struct bcm_iproc_i2c_dev *iproc_i2c)
 {
        u32 val;
 
@@ -706,8 +706,6 @@ static int bcm_iproc_i2c_init(struct bcm_iproc_i2c_dev *iproc_i2c)
 
        /* clear all pending interrupts */
        iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, 0xffffffff);
-
-       return 0;
 }
 
 static void bcm_iproc_i2c_enable_disable(struct bcm_iproc_i2c_dev *iproc_i2c,
@@ -1081,9 +1079,7 @@ static int bcm_iproc_i2c_probe(struct platform_device *pdev)
                bcm_iproc_algo.unreg_slave = NULL;
        }
 
-       ret = bcm_iproc_i2c_init(iproc_i2c);
-       if (ret)
-               return ret;
+       bcm_iproc_i2c_init(iproc_i2c);
 
        ret = bcm_iproc_i2c_cfg_speed(iproc_i2c);
        if (ret)
@@ -1162,16 +1158,13 @@ static int bcm_iproc_i2c_suspend(struct device *dev)
 static int bcm_iproc_i2c_resume(struct device *dev)
 {
        struct bcm_iproc_i2c_dev *iproc_i2c = dev_get_drvdata(dev);
-       int ret;
        u32 val;
 
        /*
         * Power domain could have been shut off completely in system deep
         * sleep, so re-initialize the block here
         */
-       ret = bcm_iproc_i2c_init(iproc_i2c);
-       if (ret)
-               return ret;
+       bcm_iproc_i2c_init(iproc_i2c);
 
        /* configure to the desired bus speed */
        val = iproc_i2c_rd_reg(iproc_i2c, TIM_CFG_OFFSET);