clk: sunxi-ng: a64: stop force-selecting PLL-MIPI as TCON0 parent

Stop force-selecting PLL-MIPI as TCON0 parent, since it breaks video
output on Pinebook that uses RGB to eDP bridge.

Partially revert commit ca1170b69968 ("clk: sunxi-ng: a64: force
select PLL_MIPI in TCON0 mux"), while still leaving
CLK_SET_RATE_NO_REPARENT flag set, since we do not want the clock to
be reparented.

The issue is that apparently different TCON0 outputs require a different
clock, or the mux might be selecting the output type.

I did an experiment: I manually configured PLL_MIPI and PLL_VIDEO0_2X
to the same clock rate and flipped the switch with devmem. Experiment
clearly showed that whenever PLL_MIPI is selected as TCON0 clock parent,
the video output stops working.

Therefore, TCON0 clock parent corresponding to the output type must be
assigned in the device tree.

Fixes: ca1170b69968 ("clk: sunxi-ng: a64: force select PLL_MIPI in TCON0 mux")
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Frank Oltmanns <frank@oltmanns.dev> # on PinePhone
Tested-by: Stuart Gathman <stuart@gathman.org> # on OG Pinebook
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Link: https://patch.msgid.link/20250104074035.1611136-5-anarsoul@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>

diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
index 82d7dcbca1cc94cd89c7ce4eca21554acbe98aa3..63f0259b0e995e8c284ac80088d83faf2eeda019 100644 (file)
--- a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
@@ -535,11 +535,11 @@ static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de", de_parents,
                                 CLK_SET_RATE_PARENT);
 
 /*
- * DSI output seems to work only when PLL_MIPI selected. Set it and prevent
- * the mux from reparenting.
+ * Experiments showed that RGB output requires pll-video0-2x, while DSI
+ * requires pll-mipi. It will not work with incorrect clock, the screen will
+ * be blank.
+ * sun50i-a64.dtsi assigns pll-mipi as TCON0 parent by default
  */
-#define SUN50I_A64_TCON0_CLK_REG       0x118
-
 static const char * const tcon0_parents[] = { "pll-mipi", "pll-video0-2x" };
 static const u8 tcon0_table[] = { 0, 2, };
 static SUNXI_CCU_MUX_TABLE_WITH_GATE_CLOSEST(tcon0_clk, "tcon0", tcon0_parents,
@@ -959,11 +959,6 @@ static int sun50i_a64_ccu_probe(struct platform_device *pdev)
 
        writel(0x515, reg + SUN50I_A64_PLL_MIPI_REG);
 
-       /* Set PLL MIPI as parent for TCON0 */
-       val = readl(reg + SUN50I_A64_TCON0_CLK_REG);
-       val &= ~GENMASK(26, 24);
-       writel(val | (0 << 24), reg + SUN50I_A64_TCON0_CLK_REG);
-
        ret = devm_sunxi_ccu_probe(&pdev->dev, reg, &sun50i_a64_ccu_desc);
        if (ret)
                return ret;