If CONFIG_PREEMPT=y:
    Unable to handle kernel NULL pointer dereference at virtual address 
00000014
    pgd = 
c0003000
    [
00000014] *pgd=
80000040004003, *pmd=
00000000
    Internal error: Oops: 206 [#1] PREEMPT SMP ARM
    Modules linked in:
    CPU: 0 PID: 17 Comm: kworker/0:1 Tainted: G        W       4.3.0-rc3-koelsch-022
    
71-g705498fc5e6a5da8-dirty #1789
    Hardware name: Generic R8A7791 (Flattened Device Tree)
    Workqueue: pm pm_runtime_work
    task: 
ef578e40 ti: 
ef57a000 task.ti: 
ef57a000
    PC is at usb_dmac_chan_halt+0xc/0xc0
    LR is at usb_dmac_runtime_suspend+0x28/0x38
    pc : [<
c023c880>]    lr : [<
c023c95c>]    psr: 
80000113
    sp : 
ef57bdf8  ip : 
00000008  fp : 
00000003
    r10: 
00000008  r9 : 
c06ab928  r8 : 
ef49e810
    r7 : 
00000000  r6 : 
000000ac  r5 : 
ef770010  r4 : 
00000000
    r3 : 
00000000  r2 : 
8ffc2b84  r1 : 
00000000  r0 : 
ef770010
    Flags: Nzcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
    Control: 
30c5307d  Table: 
40003000  DAC: 
fffffffd
    Process kworker/0:1 (pid: 17, stack limit = 0xef57a210)
    Stack: (0xef57bdf8 to 0xef57c000)
    [...
    [<
c023c880>] (usb_dmac_chan_halt) from [<
c023c95c>] (usb_dmac_runtime_suspend+0x28/0x38)
    [<
c023c95c>] (usb_dmac_runtime_suspend) from [<
c027b25c>] (pm_genpd_runtime_suspend+0x74/0x23c)
This happens because usb_dmac_probe() calls pm_runtime_put() before
usb_dmac_chan_probe(), leading to the device being suspended before the
DMA channels are initialized, causing a NULL pointer dereference.
Move the call to pm_runtime_put() to the end of usb_dmac_probe() to fix
this.
Add a check to usb_dmac_runtime_suspend() to prevent the crash from
happening in the error path.
Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
 
        struct usb_dmac *dmac = dev_get_drvdata(dev);
        int i;
 
-       for (i = 0; i < dmac->n_channels; ++i)
+       for (i = 0; i < dmac->n_channels; ++i) {
+               if (!dmac->channels[i].iomem)
+                       break;
                usb_dmac_chan_halt(&dmac->channels[i]);
+       }
 
        return 0;
 }
        }
 
        ret = usb_dmac_init(dmac);
-       pm_runtime_put(&pdev->dev);
 
        if (ret) {
                dev_err(&pdev->dev, "failed to reset device\n");
        if (ret < 0)
                goto error;
 
+       pm_runtime_put(&pdev->dev);
        return 0;
 
 error:
        of_dma_controller_free(pdev->dev.of_node);
+       pm_runtime_put(&pdev->dev);
        pm_runtime_disable(&pdev->dev);
        return ret;
 }