OMAPDSS: tpo-td043: remove platform_enable/disable callbacks

The tpo-td043 panel driver now manages the gpios required to configure the panel.
This was previously done in omap_dss_device's platform_enable/disable callbacks
defined in board files using this panel.

All the board files using this panel now pass the gpio information as platform
data via the panel_tpo_td043_data struct, which is needed by the panel driver to
configure the gpios connected to the panel. Hence, the platform_enable/disable
ops can be safely removed now.

Signed-off-by: Archit Taneja <archit@ti.com>

diff --git a/drivers/video/omap2/displays/panel-tpo-td043mtea1.c b/drivers/video/omap2/displays/panel-tpo-td043mtea1.c
index e3252bf4781ad765d2aadb7ccf6c69817517aee7..abf2bc4a18ab932593f01276fe9bee3966b69bc9 100644 (file)
--- a/drivers/video/omap2/displays/panel-tpo-td043mtea1.c
+++ b/drivers/video/omap2/displays/panel-tpo-td043mtea1.c
@@ -351,12 +351,6 @@ static int tpo_td043_enable_dss(struct omap_dss_device *dssdev)
        if (r)
                goto err0;
 
-       if (dssdev->platform_enable) {
-               r = dssdev->platform_enable(dssdev);
-               if (r)
-                       goto err1;
-       }
-
        /*
         * If we are resuming from system suspend, SPI clocks might not be
         * enabled yet, so we'll program the LCD from SPI PM resume callback.
@@ -383,9 +377,6 @@ static void tpo_td043_disable_dss(struct omap_dss_device *dssdev)
        if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
                return;
 
-       if (dssdev->platform_disable)
-               dssdev->platform_disable(dssdev);
-
        omapdss_dpi_display_disable(dssdev);
 
        if (!tpo_td043->spi_suspended)