#include <asm/asm.h>
#include <asm/smap.h>
#include <asm/spec_ctrl.h>
+#include <asm/pgtable_types.h>
#include <asm/kaiser.h>
#include <linux/linkage.h>
#include <linux/err.h>
#define X86_FEATURE_ARAT ( 7*32+ 1) /* Always Running APIC Timer */
#define X86_FEATURE_CPB ( 7*32+ 2) /* AMD Core Performance Boost */
#define X86_FEATURE_EPB ( 7*32+ 3) /* IA32_ENERGY_PERF_BIAS support */
+#define X86_FEATURE_INVPCID_SINGLE ( 7*32+ 4) /* Effectively INVPCID && CR4.PCIDE=1 */
#define X86_FEATURE_PLN ( 7*32+ 5) /* Intel Power Limit Notification */
#define X86_FEATURE_PTS ( 7*32+ 6) /* Intel Package Thermal Status */
#define X86_FEATURE_DTHERM ( 7*32+ 7) /* Digital Thermal Sensor */
#ifndef _ASM_X86_KAISER_H
#define _ASM_X86_KAISER_H
+
+#include <uapi/asm/processor-flags.h> /* For PCID constants */
+
/*
* This file includes the definitions for the KAISER feature.
* KAISER is a counter measure against x86_64 side channel attacks on
.macro _SWITCH_TO_KERNEL_CR3 reg
movq %cr3, \reg
-andq $(~KAISER_SHADOW_PGD_OFFSET), \reg
+andq $(~(X86_CR3_PCID_ASID_MASK | KAISER_SHADOW_PGD_OFFSET)), \reg
+orq X86_CR3_PCID_KERN_VAR, \reg
movq \reg, %cr3
.endm
.macro _SWITCH_TO_USER_CR3 reg
movq %cr3, \reg
-orq $(KAISER_SHADOW_PGD_OFFSET), \reg
+andq $(~(X86_CR3_PCID_ASID_MASK | KAISER_SHADOW_PGD_OFFSET)), \reg
+/*
+ * This can obviously be one instruction by putting the
+ * KAISER_SHADOW_PGD_OFFSET bit in the X86_CR3_PCID_USER_VAR.
+ * But, just leave it now for simplicity.
+ */
+orq X86_CR3_PCID_USER_VAR, \reg
+orq $(KAISER_SHADOW_PGD_OFFSET), \reg
movq \reg, %cr3
.endm
_PAGE_SOFT_DIRTY)
#define _HPAGE_CHG_MASK (_PAGE_CHG_MASK | _PAGE_PSE)
+/* The ASID is the lower 12 bits of CR3 */
+#define X86_CR3_PCID_ASID_MASK (_AC((1<<12)-1,UL))
+
+/* Mask for all the PCID-related bits in CR3: */
+#define X86_CR3_PCID_MASK (X86_CR3_PCID_NOFLUSH | X86_CR3_PCID_ASID_MASK)
+#if defined(CONFIG_KAISER) && defined(CONFIG_X86_64)
+#define X86_CR3_PCID_ASID_KERN (_AC(0x4,UL))
+#define X86_CR3_PCID_ASID_USER (_AC(0x6,UL))
+
+#define X86_CR3_PCID_KERN_FLUSH (X86_CR3_PCID_ASID_KERN)
+#define X86_CR3_PCID_USER_FLUSH (X86_CR3_PCID_ASID_USER)
+#define X86_CR3_PCID_KERN_NOFLUSH (X86_CR3_PCID_NOFLUSH | X86_CR3_PCID_ASID_KERN)
+#define X86_CR3_PCID_USER_NOFLUSH (X86_CR3_PCID_NOFLUSH | X86_CR3_PCID_ASID_USER)
+#else
+#define X86_CR3_PCID_ASID_KERN (_AC(0x0,UL))
+#define X86_CR3_PCID_ASID_USER (_AC(0x0,UL))
+/*
+ * PCIDs are unsupported on 32-bit and none of these bits can be
+ * set in CR3:
+ */
+#define X86_CR3_PCID_KERN_FLUSH (0)
+#define X86_CR3_PCID_USER_FLUSH (0)
+#define X86_CR3_PCID_KERN_NOFLUSH (0)
+#define X86_CR3_PCID_USER_NOFLUSH (0)
+#endif
+
/*
* The cache modes defined here are used to translate between pure SW usage
* and the HW defined cache mode bits and/or PAT entries.
unsigned long type)
{
struct { u64 d[2]; } desc = { { pcid, addr } };
-
/*
* The memory clobber is because the whole point is to invalidate
* stale TLB entries and, especially if we're flushing global
static inline void __native_flush_tlb(void)
{
native_write_cr3(native_read_cr3());
+ /*
+ * We are no longer using globals with KAISER, so a
+ * "nonglobals" flush would work too. But, this is more
+ * conservative.
+ *
+ * Note, this works with CR4.PCIDE=0 or 1.
+ */
+ invpcid_flush_all();
}
static inline void __native_flush_tlb_global_irq_disabled(void)
/*
* Using INVPCID is considerably faster than a pair of writes
* to CR4 sandwiched inside an IRQ flag save/restore.
+ *
+ * Note, this works with CR4.PCIDE=0 or 1.
*/
invpcid_flush_all();
return;
static inline void __native_flush_tlb_single(unsigned long addr)
{
- asm volatile("invlpg (%0)" ::"r" (addr) : "memory");
+ /*
+ * SIMICS #GP's if you run INVPCID with type 2/3
+ * and X86_CR4_PCIDE clear. Shame!
+ *
+ * The ASIDs used below are hard-coded. But, we must not
+ * call invpcid(type=1/2) before CR4.PCIDE=1. Just call
+ * invpcid in the case we are called early.
+ */
+ if (!this_cpu_has(X86_FEATURE_INVPCID_SINGLE)) {
+ asm volatile("invlpg (%0)" ::"r" (addr) : "memory");
+ return;
+ }
+ /* Flush the address out of both PCIDs. */
+ /*
+ * An optimization here might be to determine addresses
+ * that are only kernel-mapped and only flush the kernel
+ * ASID. But, userspace flushes are probably much more
+ * important performance-wise.
+ *
+ * Make sure to do only a single invpcid when KAISER is
+ * disabled and we have only a single ASID.
+ */
+ if (X86_CR3_PCID_ASID_KERN != X86_CR3_PCID_ASID_USER)
+ invpcid_flush_one(X86_CR3_PCID_ASID_KERN, addr);
+ invpcid_flush_one(X86_CR3_PCID_ASID_USER, addr);
}
static inline void __flush_tlb_all(void)
#define X86_CR3_PWT _BITUL(X86_CR3_PWT_BIT)
#define X86_CR3_PCD_BIT 4 /* Page Cache Disable */
#define X86_CR3_PCD _BITUL(X86_CR3_PCD_BIT)
-#define X86_CR3_PCID_MASK _AC(0x00000fff,UL) /* PCID Mask */
+#define X86_CR3_PCID_NOFLUSH_BIT 63 /* Preserve old PCID */
+#define X86_CR3_PCID_NOFLUSH _BITULL(X86_CR3_PCID_NOFLUSH_BIT)
/*
* Intel CPU features in CR4
}
}
+/*
+ * These can have bit 63 set, so we can not just use a plain "or"
+ * instruction to get their value or'd into CR3. It would take
+ * another register. So, we use a memory reference to these
+ * instead.
+ *
+ * This is also handy because systems that do not support
+ * PCIDs just end up or'ing a 0 into their CR3, which does
+ * no harm.
+ */
+__aligned(PAGE_SIZE) unsigned long X86_CR3_PCID_KERN_VAR = 0;
+__aligned(PAGE_SIZE) unsigned long X86_CR3_PCID_USER_VAR = 0;
+
static void setup_pcid(struct cpuinfo_x86 *c)
{
if (cpu_has(c, X86_FEATURE_PCID)) {
if (cpu_has(c, X86_FEATURE_PGE)) {
cr4_set_bits(X86_CR4_PCIDE);
+ /*
+ * These variables are used by the entry/exit
+ * code to change PCIDs.
+ */
+#ifdef CONFIG_KAISER
+ X86_CR3_PCID_KERN_VAR = X86_CR3_PCID_KERN_NOFLUSH;
+ X86_CR3_PCID_USER_VAR = X86_CR3_PCID_USER_NOFLUSH;
+#endif
+ /*
+ * INVPCID has two "groups" of types:
+ * 1/2: Invalidate an individual address
+ * 3/4: Invalidate all contexts
+ *
+ * 1/2 take a PCID, but 3/4 do not. So, 3/4
+ * ignore the PCID argument in the descriptor.
+ * But, we have to be careful not to call 1/2
+ * with an actual non-zero PCID in them before
+ * we do the above cr4_set_bits().
+ */
+ if (cpu_has(c, X86_FEATURE_INVPCID))
+ set_cpu_cap(c, X86_FEATURE_INVPCID_SINGLE);
} else {
/*
* flush_tlb_all(), as currently implemented, won't
/* %rax is saved above, so OK to clobber here */
movq %cr3, %rax
pushq %rax
- andq $(~KAISER_SHADOW_PGD_OFFSET), %rax
+ /* mask off "user" bit of pgd address and 12 PCID bits: */
+ andq $(~(X86_CR3_PCID_ASID_MASK | KAISER_SHADOW_PGD_OFFSET)), %rax
+ /* Add back kernel PCID and "no flush" bit */
+ orq X86_CR3_PCID_KERN_VAR, %rax
movq %rax, %cr3
#endif
call do_nmi
/* %rax is saved above, so OK to clobber here */
movq %cr3, %rax
pushq %rax
- andq $(~KAISER_SHADOW_PGD_OFFSET), %rax
+ /* mask off "user" bit of pgd address and 12 PCID bits: */
+ andq $(~(X86_CR3_PCID_ASID_MASK | KAISER_SHADOW_PGD_OFFSET)), %rax
+ /* Add back kernel PCID and "no flush" bit */
+ orq X86_CR3_PCID_KERN_VAR, %rax
movq %rax, %cr3
#endif
DEFAULT_FRAME 0 /* XXX: Do we need this? */
return 1;
/* PCID can not be enabled when cr3[11:0]!=000H or EFER.LMA=0 */
- if ((kvm_read_cr3(vcpu) & X86_CR3_PCID_MASK) || !is_long_mode(vcpu))
+ if ((kvm_read_cr3(vcpu) & X86_CR3_PCID_ASID_MASK) ||
+ !is_long_mode(vcpu))
return 1;
}
} while (0)
extern char __per_cpu_user_mapped_start[], __per_cpu_user_mapped_end[];
+extern unsigned long X86_CR3_PCID_KERN_VAR;
+extern unsigned long X86_CR3_PCID_USER_VAR;
/*
* If anything in here fails, we will likely die on one of the
* first kernel->user transitions and init will die. But, we
kaiser_add_user_map_early(&debug_idt_table,
sizeof(gate_desc) * NR_VECTORS,
__PAGE_KERNEL);
+
+ kaiser_add_user_map_early(&X86_CR3_PCID_KERN_VAR, PAGE_SIZE,
+ __PAGE_KERNEL);
+ kaiser_add_user_map_early(&X86_CR3_PCID_USER_VAR, PAGE_SIZE,
+ __PAGE_KERNEL);
}
/* Add a mapping to the shadow mapping, and synchronize the mappings */
unsigned long flush_end;
};
+static void load_new_mm_cr3(pgd_t *pgdir)
+{
+ unsigned long new_mm_cr3 = __pa(pgdir);
+
+ /*
+ * KAISER, plus PCIDs needs some extra work here. But,
+ * if either of features is not present, we need no
+ * PCIDs here and just do a normal, full TLB flush with
+ * the write_cr3()
+ */
+ if (!IS_ENABLED(CONFIG_KAISER) ||
+ !cpu_feature_enabled(X86_FEATURE_PCID))
+ goto out_set_cr3;
+ /*
+ * We reuse the same PCID for different tasks, so we must
+ * flush all the entires for the PCID out when we change
+ * tasks.
+ */
+ new_mm_cr3 = X86_CR3_PCID_KERN_FLUSH | __pa(pgdir);
+
+ /*
+ * The flush from load_cr3() may leave old TLB entries
+ * for userspace in place. We must flush that context
+ * separately. We can theoretically delay doing this
+ * until we actually load up the userspace CR3, but
+ * that's a bit tricky. We have to have the "need to
+ * flush userspace PCID" bit per-cpu and check it in the
+ * exit-to-userspace paths.
+ */
+ invpcid_flush_single_context(X86_CR3_PCID_ASID_USER);
+
+out_set_cr3:
+ /*
+ * Caution: many callers of this function expect
+ * that load_cr3() is serializing and orders TLB
+ * fills with respect to the mm_cpumask writes.
+ */
+ write_cr3(new_mm_cr3);
+}
+
/*
* We cannot call mmdrop() because we are in interrupt context,
* instead update mm->cpu_vm_mask.
BUG();
if (cpumask_test_cpu(cpu, mm_cpumask(active_mm))) {
cpumask_clear_cpu(cpu, mm_cpumask(active_mm));
- load_cr3(swapper_pg_dir);
+ load_new_mm_cr3(swapper_pg_dir);
/*
* This gets called in the idle path where RCU
* functions differently. Tracing normally
* ordering guarantee we need.
*
*/
- load_cr3(next->pgd);
+ load_new_mm_cr3(next->pgd);
trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL);
* As above, load_cr3() is serializing and orders TLB
* fills with respect to the mm_cpumask write.
*/
- load_cr3(next->pgd);
+ load_new_mm_cr3(next->pgd);
trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL);
load_mm_cr4(next);
load_mm_ldt(next);
projects / users / jedix / linux-maple.git / commitdiff