/* IOMMU controls. */
-/* The PCI address space does not equal the physical memory address space.
- The networking and block device layers use this boolean for bounce buffer
- decisions. */
-#define PCI_DMA_BUS_IS_PHYS 0
-
/* TODO: integrate with include/asm-generic/pci.h ? */
static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
{
#define PCIBIOS_MIN_MEM 0x100000
#define pcibios_assign_all_busses() 1
-/*
- * The PCI address space does equal the physical memory address space.
- * The networking and block device layers use this boolean for bounce
- * buffer decisions.
- */
-#define PCI_DMA_BUS_IS_PHYS 1
#endif /* __KERNEL__ */
}
#endif /* CONFIG_PCI_DOMAINS */
-/*
- * The PCI address space does equal the physical memory address space.
- * The networking and block device layers use this boolean for bounce
- * buffer decisions.
- */
-#define PCI_DMA_BUS_IS_PHYS (1)
-
#define HAVE_PCI_MMAP
#define ARCH_GENERIC_PCI_MMAP_RESOURCE
#define pcibios_assign_all_busses() \
(pci_has_flag(PCI_REASSIGN_ALL_BUS))
-/*
- * PCI address space differs from physical memory address space
- */
-#define PCI_DMA_BUS_IS_PHYS (0)
-
#define ARCH_GENERIC_PCI_MMAP_RESOURCE 1
extern int isa_dma_bridge_buggy;
/* We don't do dynamic PCI IRQ allocation */
}
-#define PCI_DMA_BUS_IS_PHYS (1)
-
#endif /* _ASM_H8300_PCI_H */
.sync_single_for_cpu = hexagon_sync_single_for_cpu,
.sync_single_for_device = hexagon_sync_single_for_device,
.mapping_error = hexagon_mapping_error,
- .is_phys = 1,
};
void __init hexagon_dma_init(void)
ioc_resource_init(ioc);
ioc_sac_init(ioc);
- if ((long) ~iovp_mask > (long) ia64_max_iommu_merge_mask)
- ia64_max_iommu_merge_mask = ~iovp_mask;
-
printk(KERN_INFO PFX
"%s %d.%d HPA 0x%lx IOVA space %dMb at 0x%lx\n",
ioc->name, (ioc->rev >> 4) & 0xF, ioc->rev & 0xF,
#define PCIBIOS_MIN_IO 0x1000
#define PCIBIOS_MIN_MEM 0x10000000
-/*
- * PCI_DMA_BUS_IS_PHYS should be set to 1 if there is _necessarily_ a direct
- * correspondence between device bus addresses and CPU physical addresses.
- * Platforms with a hardware I/O MMU _must_ turn this off to suppress the
- * bounce buffer handling code in the block and network device layers.
- * Platforms with separate bus address spaces _must_ turn this off and provide
- * a device DMA mapping implementation that takes care of the necessary
- * address translation.
- *
- * For now, the ia64 platforms which may have separate/multiple bus address
- * spaces all have I/O MMUs which support the merging of physically
- * discontiguous buffers, so we can use that as the sole factor to determine
- * the setting of PCI_DMA_BUS_IS_PHYS.
- */
-extern unsigned long ia64_max_iommu_merge_mask;
-#define PCI_DMA_BUS_IS_PHYS (ia64_max_iommu_merge_mask == ~0UL)
-
#define HAVE_PCI_MMAP
#define ARCH_GENERIC_PCI_MMAP_RESOURCE
#define arch_can_pci_mmap_wc() 1
#define CACHE_STRIDE_SHIFT 5
unsigned long ia64_cache_stride_shift = ~0;
-/*
- * The merge_mask variable needs to be set to (max(iommu_page_size(iommu)) - 1). This
- * mask specifies a mask of address bits that must be 0 in order for two buffers to be
- * mergeable by the I/O MMU (i.e., the end address of the first buffer and the start
- * address of the second buffer must be aligned to (merge_mask+1) in order to be
- * mergeable). By default, we assume there is no I/O MMU which can merge physically
- * discontiguous buffers, so we set the merge_mask to ~0UL, which corresponds to a iommu
- * page-size of 2^64.
- */
-unsigned long ia64_max_iommu_merge_mask = ~0UL;
-EXPORT_SYMBOL(ia64_max_iommu_merge_mask);
-
/*
* We use a special marker for the end of memory and it uses the extra (+1) slot
*/
tioca_init_provider();
tioce_init_provider();
- /*
- * This is needed to avoid bounce limit checks in the blk layer
- */
- ia64_max_iommu_merge_mask = ~PAGE_MASK;
-
sn_irq_lh_init();
INIT_LIST_HEAD(&sn_sysdata_list);
sn_init_cpei_timer();
#include <asm-generic/pci.h>
-/* The PCI address space does equal the physical memory
- * address space. The networking and block device layers use
- * this boolean for bounce buffer decisions.
- */
-#define PCI_DMA_BUS_IS_PHYS (1)
-
#define pcibios_assign_all_busses() 1
#define PCIBIOS_MIN_IO 0x00000100
#define HAVE_PCI_LEGACY 1
-/* The PCI address space does equal the physical memory
- * address space (no IOMMU). The IDE and SCSI device layers use
- * this boolean for bounce buffer decisions.
- */
-#define PCI_DMA_BUS_IS_PHYS (1)
-
extern void pcibios_claim_one_bus(struct pci_bus *b);
extern void pcibios_finish_adding_to_bus(struct pci_bus *bus);
#include <linux/string.h>
#include <asm/io.h>
-/*
- * The PCI address space does equal the physical memory address space.
- * The networking and block device layers use this boolean for bounce
- * buffer decisions.
- */
-#define PCI_DMA_BUS_IS_PHYS (1)
-
#ifdef CONFIG_PCI_DOMAINS_GENERIC
static inline int pci_proc_domain(struct pci_bus *bus)
{
#define PCI_F_EXTEND 0UL
#endif /* !CONFIG_64BIT */
-/*
- * If the PCI device's view of memory is the same as the CPU's view of memory,
- * PCI_DMA_BUS_IS_PHYS is true. The networking and block device layers use
- * this boolean for bounce buffer decisions.
- */
-#ifdef CONFIG_PA20
-/* All PA-2.0 machines have an IOMMU. */
-#define PCI_DMA_BUS_IS_PHYS 0
-#define parisc_has_iommu() do { } while (0)
-#else
-
-#if defined(CONFIG_IOMMU_CCIO) || defined(CONFIG_IOMMU_SBA)
-extern int parisc_bus_is_phys; /* in arch/parisc/kernel/setup.c */
-#define PCI_DMA_BUS_IS_PHYS parisc_bus_is_phys
-#define parisc_has_iommu() do { parisc_bus_is_phys = 0; } while (0)
-#else
-#define PCI_DMA_BUS_IS_PHYS 1
-#define parisc_has_iommu() do { } while (0)
-#endif
-
-#endif /* !CONFIG_PA20 */
-
-
/*
** Most PCI devices (eg Tulip, NCR720) also export the same registers
** to both MMIO and I/O port space. Due to poor performance of I/O Port
struct proc_dir_entry * proc_gsc_root __read_mostly = NULL;
struct proc_dir_entry * proc_mckinley_root __read_mostly = NULL;
-#if !defined(CONFIG_PA20) && (defined(CONFIG_IOMMU_CCIO) || defined(CONFIG_IOMMU_SBA))
-int parisc_bus_is_phys __read_mostly = 1; /* Assume no IOMMU is present */
-EXPORT_SYMBOL(parisc_bus_is_phys);
-#endif
-
void __init setup_cmdline(char **cmdline_p)
{
extern unsigned int boot_args[];
#define HAVE_PCI_LEGACY 1
-#ifdef CONFIG_PPC64
-
-/* The PCI address space does not equal the physical memory address
- * space (we have an IOMMU). The IDE and SCSI device layers use
- * this boolean for bounce buffer decisions.
- */
-#define PCI_DMA_BUS_IS_PHYS (0)
-
-#else /* 32-bit */
-
-/* The PCI address space does equal the physical memory
- * address space (no IOMMU). The IDE and SCSI device layers use
- * this boolean for bounce buffer decisions.
- */
-#define PCI_DMA_BUS_IS_PHYS (1)
-
-#endif /* CONFIG_PPC64 */
-
extern void pcibios_claim_one_bus(struct pci_bus *b);
extern void pcibios_finish_adding_to_bus(struct pci_bus *bus);
/* RISC-V shim does not initialize PCI bus */
#define pcibios_assign_all_busses() 1
-/* We do not have an IOMMU */
-#define PCI_DMA_BUS_IS_PHYS 1
-
extern int isa_dma_bridge_buggy;
#ifdef CONFIG_PCI
#ifndef __ASM_S390_PCI_H
#define __ASM_S390_PCI_H
-/* must be set before including asm-generic/pci.h */
-#define PCI_DMA_BUS_IS_PHYS (0)
/* must be set before including pci_clp.h */
#define PCI_BAR_COUNT 6
.map_page = s390_dma_map_pages,
.unmap_page = s390_dma_unmap_pages,
.mapping_error = s390_mapping_error,
- /* if we support direct DMA this must be conditional */
- .is_phys = 0,
/* dma_supported is unconditionally true without a callback */
};
EXPORT_SYMBOL_GPL(s390_pci_dma_ops);
* SuperH has everything mapped statically like x86.
*/
-/* The PCI address space does equal the physical memory
- * address space. The networking and block device layers use
- * this boolean for bounce buffer decisions.
- */
-#define PCI_DMA_BUS_IS_PHYS (dma_ops->is_phys)
-
#ifdef CONFIG_PCI
/*
* None of the SH PCI controllers support MWI, it is always treated as a
.sync_single_for_device = nommu_sync_single_for_device,
.sync_sg_for_device = nommu_sync_sg_for_device,
#endif
- .is_phys = 1,
};
void __init no_iommu_init(void)
#define PCI_IRQ_NONE 0xffffffff
-/* Dynamic DMA mapping stuff.
- */
-#define PCI_DMA_BUS_IS_PHYS (0)
-
#endif /* __KERNEL__ */
#ifndef CONFIG_LEON_PCI
#define PCI_IRQ_NONE 0xffffffff
-/* The PCI address space does not equal the physical memory
- * address space. The networking and block device layers use
- * this boolean for bounce buffer decisions.
- */
-#define PCI_DMA_BUS_IS_PHYS (0)
-
/* PCI IOMMU mapping bypass support. */
/* PCI 64-bit addressing works for all slots on all controller
#define native_setup_msi_irqs NULL
#define native_teardown_msi_irq NULL
#endif
-
-#define PCI_DMA_BUS_IS_PHYS (dma_ops->is_phys)
-
#endif /* __KERNEL__ */
#ifdef CONFIG_X86_64
* decisions.
*/
-#define PCI_DMA_BUS_IS_PHYS (1)
-
/* Tell PCI code what kind of PCI resource mappings we support */
#define HAVE_PCI_MMAP 1
#define ARCH_GENERIC_PCI_MMAP_RESOURCE 1
}
#endif
ioc_count++;
-
- parisc_has_iommu();
return 0;
}
proc_create("sba_iommu", 0, root, &sba_proc_fops);
proc_create("sba_iommu-bitmap", 0, root, &sba_proc_bitmap_fops);
#endif
-
- parisc_has_iommu();
return 0;
}
}
#endif /* HAVE_ARCH_PCI_GET_LEGACY_IDE_IRQ */
-/*
- * By default, assume that no iommu is in use and that the PCI
- * space is mapped to address physical 0.
- */
-#ifndef PCI_DMA_BUS_IS_PHYS
-#define PCI_DMA_BUS_IS_PHYS (1)
-#endif
-
#endif /* _ASM_GENERIC_PCI_H */
#ifdef ARCH_HAS_DMA_GET_REQUIRED_MASK
u64 (*get_required_mask)(struct device *dev);
#endif
- int is_phys;
};
extern const struct dma_map_ops dma_direct_ops;
.map_sg = dma_direct_map_sg,
.dma_supported = dma_direct_supported,
.mapping_error = dma_direct_mapping_error,
- .is_phys = 1,
};
EXPORT_SYMBOL(dma_direct_ops);
# error Virtio userspace code does not support CONFIG_HAS_DMA
#endif
-#define PCI_DMA_BUS_IS_PHYS 1
-
enum dma_data_direction {
DMA_BIDIRECTIONAL = 0,
DMA_TO_DEVICE = 1,
projects / linux-platform-drivers-x86.git / commitdiff