mem_encrypt=on:         Activate SME
                        mem_encrypt=off:        Do not activate SME
 
-                       Refer to Documentation/virtual/kvm/amd-memory-encryption.rst
+                       Refer to Documentation/virt/kvm/amd-memory-encryption.rst
                        for details on when memory encryption can be activated.
 
        mem_sleep_default=      [SUSPEND] Default system suspend mode:
 
 
 Currently, this ioctl is used for issuing Secure Encrypted Virtualization
 (SEV) commands on AMD Processors. The SEV commands are defined in
-Documentation/virtual/kvm/amd-memory-encryption.rst.
+Documentation/virt/kvm/amd-memory-encryption.rst.
 
 4.111 KVM_MEMORY_ENCRYPT_REG_REGION
 
 
   number in R1.
 
   For further information on the S390 diagnose call as supported by KVM,
-  refer to Documentation/virtual/kvm/s390-diag.txt.
+  refer to Documentation/virt/kvm/s390-diag.txt.
 
  PowerPC:
   It uses R3-R10 and hypercall number in R11. R4-R11 are used as output registers.
 
   KVM hypercalls uses 4 byte opcode, that are patched with 'hypercall-instructions'
   property inside the device tree's /hypervisor node.
-  For more information refer to Documentation/virtual/kvm/ppc-pv.txt
+  For more information refer to Documentation/virt/kvm/ppc-pv.txt
 
 MIPS:
   KVM hypercalls use the HYPCALL instruction with code 0 and the hypercall
 
      vcpu->arch.mmio_gfn, and call the emulator
  - If both P bit and R/W bit of error code are set, this could possibly
    be handled as a "fast page fault" (fixed without taking the MMU lock).  See
-   the description in Documentation/virtual/kvm/locking.txt.
+   the description in Documentation/virt/kvm/locking.txt.
  - if needed, walk the guest page tables to determine the guest translation
    (gva->gpa or ngpa->gpa)
    - if permissions are insufficient, reflect the fault back to the guest
 
 2.  Patches should be against kvm.git master branch.
 
 3.  If the patch introduces or modifies a new userspace API:
-    - the API must be documented in Documentation/virtual/kvm/api.txt
+    - the API must be documented in Documentation/virt/kvm/api.txt
     - the API must be discoverable using KVM_CHECK_EXTENSION
 
 4.  New state must include support for save/restore.
 
 W:     http://www.linux-kvm.org
 T:     git git://git.kernel.org/pub/scm/virt/kvm/kvm.git
 S:     Supported
-F:     Documentation/virtual/kvm/
+F:     Documentation/virt/kvm/
 F:     include/trace/events/kvm.h
 F:     include/uapi/asm-generic/kvm*
 F:     include/uapi/linux/kvm*
 M:     Alok Kataria <akataria@vmware.com>
 L:     virtualization@lists.linux-foundation.org
 S:     Supported
-F:     Documentation/virtual/paravirt_ops.txt
+F:     Documentation/virt/paravirt_ops.txt
 F:     arch/*/kernel/paravirt*
 F:     arch/*/include/asm/paravirt*.h
 F:     include/linux/hypervisor.h
 Q:     https://patchwork.ozlabs.org/project/linux-um/list/
 T:     git git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml.git
 S:     Maintained
-F:     Documentation/virtual/uml/
+F:     Documentation/virt/uml/
 F:     arch/um/
 F:     arch/x86/um/
 F:     fs/hostfs/
 
  * Struct fields are always 32 or 64 bit aligned, depending on them being 32
  * or 64 bit wide respectively.
  *
- * See Documentation/virtual/kvm/ppc-pv.txt
+ * See Documentation/virt/kvm/ppc-pv.txt
  */
 struct kvm_vcpu_arch_shared {
        __u64 scratch1;
 
                /*
                 * Currently, fast page fault only works for direct mapping
                 * since the gfn is not stable for indirect shadow page. See
-                * Documentation/virtual/kvm/locking.txt to get more detail.
+                * Documentation/virt/kvm/locking.txt to get more detail.
                 */
                fault_handled = fast_pf_fix_direct_spte(vcpu, sp,
                                                        iterator.sptep, spte,
 
         * ACPI gsi notion of irq.
         * For IA-64 (APIC model) IOAPIC0: irq 0-23; IOAPIC1: irq 24-47..
         * For X86 (standard AT mode) PIC0/1: irq 0-15. IOAPIC0: 0-23..
-        * For ARM: See Documentation/virtual/kvm/api.txt
+        * For ARM: See Documentation/virt/kvm/api.txt
         */
        union {
                __u32 irq;
  *
  * KVM_IRQFD_FLAG_RESAMPLE indicates resamplefd is valid and specifies
  * the irqfd to operate in resampling mode for level triggered interrupt
- * emulation.  See Documentation/virtual/kvm/api.txt.
+ * emulation.  See Documentation/virt/kvm/api.txt.
  */
 #define KVM_IRQFD_FLAG_RESAMPLE (1 << 1)
 
 
         * ACPI gsi notion of irq.
         * For IA-64 (APIC model) IOAPIC0: irq 0-23; IOAPIC1: irq 24-47..
         * For X86 (standard AT mode) PIC0/1: irq 0-15. IOAPIC0: 0-23..
-        * For ARM: See Documentation/virtual/kvm/api.txt
+        * For ARM: See Documentation/virt/kvm/api.txt
         */
        union {
                __u32 irq;
  *
  * KVM_IRQFD_FLAG_RESAMPLE indicates resamplefd is valid and specifies
  * the irqfd to operate in resampling mode for level triggered interrupt
- * emulation.  See Documentation/virtual/kvm/api.txt.
+ * emulation.  See Documentation/virt/kvm/api.txt.
  */
 #define KVM_IRQFD_FLAG_RESAMPLE (1 << 1)
 
 
                 * Ensure we set mode to IN_GUEST_MODE after we disable
                 * interrupts and before the final VCPU requests check.
                 * See the comment in kvm_vcpu_exiting_guest_mode() and
-                * Documentation/virtual/kvm/vcpu-requests.rst
+                * Documentation/virt/kvm/vcpu-requests.rst
                 */
                smp_store_mb(vcpu->mode, IN_GUEST_MODE);
 
 
         * pending state of interrupt is latched in pending_latch variable.
         * Userspace will save and restore pending state and line_level
         * separately.
-        * Refer to Documentation/virtual/kvm/devices/arm-vgic-v3.txt
+        * Refer to Documentation/virt/kvm/devices/arm-vgic-v3.txt
         * for handling of ISPENDR and ICPENDR.
         */
        for (i = 0; i < len * 8; i++) {
 
                            VGIC_AFFINITY_LEVEL(val, 3))
 
 /*
- * As per Documentation/virtual/kvm/devices/arm-vgic-v3.txt,
+ * As per Documentation/virt/kvm/devices/arm-vgic-v3.txt,
  * below macros are defined for CPUREG encoding.
  */
 #define KVM_REG_ARM_VGIC_SYSREG_OP0_MASK   0x000000000000c000
                                      KVM_REG_ARM_VGIC_SYSREG_OP2_MASK)
 
 /*
- * As per Documentation/virtual/kvm/devices/arm-vgic-its.txt,
+ * As per Documentation/virt/kvm/devices/arm-vgic-its.txt,
  * below macros are defined for ITS table entry encoding.
  */
 #define KVM_ITS_CTE_VALID_SHIFT                63