usb: dwc3: Use the correct speed macros for DSTS/DCFG

Correct the use of the DWC3_DSTS_XXX_SPEED and DWC3_DCFG_XXX_SPEED
macros. The wrong set of macros were being used in a few places.

This is only a cosmetic change as the values for both sets are
identical.

Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index d0f74583c95543df2dca789054a200f572a720ca..0c11fd6e305e1d7d7e72de53b26762901bb8549b 100644 (file)
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1672,16 +1672,16 @@ static int __dwc3_gadget_start(struct dwc3 *dwc)
        } else {
                switch (dwc->maximum_speed) {
                case USB_SPEED_LOW:
-                       reg |= DWC3_DSTS_LOWSPEED;
+                       reg |= DWC3_DCFG_LOWSPEED;
                        break;
                case USB_SPEED_FULL:
-                       reg |= DWC3_DSTS_FULLSPEED1;
+                       reg |= DWC3_DCFG_FULLSPEED1;
                        break;
                case USB_SPEED_HIGH:
-                       reg |= DWC3_DSTS_HIGHSPEED;
+                       reg |= DWC3_DCFG_HIGHSPEED;
                        break;
                case USB_SPEED_SUPER_PLUS:
-                       reg |= DWC3_DSTS_SUPERSPEED_PLUS;
+                       reg |= DWC3_DCFG_SUPERSPEED_PLUS;
                        break;
                default:
                        dev_err(dwc->dev, "invalid dwc->maximum_speed (%d)\n",
@@ -2459,12 +2459,12 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
        dwc3_update_ram_clk_sel(dwc, speed);
 
        switch (speed) {
-       case DWC3_DCFG_SUPERSPEED_PLUS:
+       case DWC3_DSTS_SUPERSPEED_PLUS:
                dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
                dwc->gadget.ep0->maxpacket = 512;
                dwc->gadget.speed = USB_SPEED_SUPER_PLUS;
                break;
-       case DWC3_DCFG_SUPERSPEED:
+       case DWC3_DSTS_SUPERSPEED:
                /*
                 * WORKAROUND: DWC3 revisions <1.90a have an issue which
                 * would cause a missing USB3 Reset event.
@@ -2485,18 +2485,18 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
                dwc->gadget.ep0->maxpacket = 512;
                dwc->gadget.speed = USB_SPEED_SUPER;
                break;
-       case DWC3_DCFG_HIGHSPEED:
+       case DWC3_DSTS_HIGHSPEED:
                dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64);
                dwc->gadget.ep0->maxpacket = 64;
                dwc->gadget.speed = USB_SPEED_HIGH;
                break;
-       case DWC3_DCFG_FULLSPEED2:
-       case DWC3_DCFG_FULLSPEED1:
+       case DWC3_DSTS_FULLSPEED2:
+       case DWC3_DSTS_FULLSPEED1:
                dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64);
                dwc->gadget.ep0->maxpacket = 64;
                dwc->gadget.speed = USB_SPEED_FULL;
                break;
-       case DWC3_DCFG_LOWSPEED:
+       case DWC3_DSTS_LOWSPEED:
                dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(8);
                dwc->gadget.ep0->maxpacket = 8;
                dwc->gadget.speed = USB_SPEED_LOW;
@@ -2506,8 +2506,8 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
        /* Enable USB2 LPM Capability */
 
        if ((dwc->revision > DWC3_REVISION_194A) &&
-           (speed != DWC3_DCFG_SUPERSPEED) &&
-           (speed != DWC3_DCFG_SUPERSPEED_PLUS)) {
+           (speed != DWC3_DSTS_SUPERSPEED) &&
+           (speed != DWC3_DSTS_SUPERSPEED_PLUS)) {
                reg = dwc3_readl(dwc->regs, DWC3_DCFG);
                reg |= DWC3_DCFG_LPM_CAP;
                dwc3_writel(dwc->regs, DWC3_DCFG, reg);