media: i2c: imx290: Add support for imx327 variant

Both sensors are quite similar. Their specs only differ regarding LVDS
and parallel output but are identical regarding MIPI-CSI-2 interface.
But they use a different init setting of hard-coded values, taken from
the datasheet.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c
index 6b030b3a0229b9d27094633c5f6ca4415f8a5276..94bba482af38d80ede01bb3215c82cb95548108e 100644 (file)
--- a/drivers/media/i2c/imx290.c
+++ b/drivers/media/i2c/imx290.c
@@ -176,10 +176,14 @@ enum imx290_colour_variant {
 enum imx290_model {
        IMX290_MODEL_IMX290LQR,
        IMX290_MODEL_IMX290LLR,
+       IMX290_MODEL_IMX327LQR,
 };
 
 struct imx290_model_info {
        enum imx290_colour_variant colour_variant;
+       const struct imx290_regval *init_regs;
+       size_t init_regs_num;
+       const char *name;
 };
 
 enum imx290_clk_freq {
@@ -275,10 +279,14 @@ static const struct imx290_regval imx290_global_init_settings[] = {
        { IMX290_WINWV, 1097 },
        { IMX290_XSOUTSEL, IMX290_XSOUTSEL_XVSOUTSEL_VSYNC |
                           IMX290_XSOUTSEL_XHSOUTSEL_HSYNC },
-       { IMX290_REG_8BIT(0x300f), 0x00 },
-       { IMX290_REG_8BIT(0x3010), 0x21 },
+       { IMX290_REG_8BIT(0x3011), 0x02 },
        { IMX290_REG_8BIT(0x3012), 0x64 },
        { IMX290_REG_8BIT(0x3013), 0x00 },
+};
+
+static const struct imx290_regval imx290_global_init_settings_290[] = {
+       { IMX290_REG_8BIT(0x300f), 0x00 },
+       { IMX290_REG_8BIT(0x3010), 0x21 },
        { IMX290_REG_8BIT(0x3016), 0x09 },
        { IMX290_REG_8BIT(0x3070), 0x02 },
        { IMX290_REG_8BIT(0x3071), 0x11 },
@@ -331,6 +339,12 @@ static const struct imx290_regval xclk_regs[][IMX290_NUM_CLK_REGS] = {
        },
 };
 
+static const struct imx290_regval imx290_global_init_settings_327[] = {
+       { IMX290_REG_8BIT(0x309e), 0x4A },
+       { IMX290_REG_8BIT(0x309f), 0x4A },
+       { IMX290_REG_8BIT(0x313b), 0x61 },
+};
+
 static const struct imx290_regval imx290_1080p_settings[] = {
        /* mode settings */
        { IMX290_WINWV_OB, 12 },
@@ -1009,6 +1023,14 @@ static int imx290_start_streaming(struct imx290 *imx290,
                return ret;
        }
 
+       /* Set mdel specific init register settings */
+       ret = imx290_set_register_array(imx290, imx290->model->init_regs,
+                                       imx290->model->init_regs_num);
+       if (ret < 0) {
+               dev_err(imx290->dev, "Could not set model specific init registers\n");
+               return ret;
+       }
+
        /* Set clock parameters based on mode and xclk */
        ret = imx290_set_clock(imx290);
        if (ret < 0) {
@@ -1477,9 +1499,21 @@ static s64 imx290_check_link_freqs(const struct imx290 *imx290,
 static const struct imx290_model_info imx290_models[] = {
        [IMX290_MODEL_IMX290LQR] = {
                .colour_variant = IMX290_VARIANT_COLOUR,
+               .init_regs = imx290_global_init_settings_290,
+               .init_regs_num = ARRAY_SIZE(imx290_global_init_settings_290),
+               .name = "imx290",
        },
        [IMX290_MODEL_IMX290LLR] = {
                .colour_variant = IMX290_VARIANT_MONO,
+               .init_regs = imx290_global_init_settings_290,
+               .init_regs_num = ARRAY_SIZE(imx290_global_init_settings_290),
+               .name = "imx290",
+       },
+       [IMX290_MODEL_IMX327LQR] = {
+               .colour_variant = IMX290_VARIANT_COLOUR,
+               .init_regs = imx290_global_init_settings_327,
+               .init_regs_num = ARRAY_SIZE(imx290_global_init_settings_327),
+               .name = "imx327",
        },
 };
 
@@ -1612,6 +1646,9 @@ static int imx290_probe(struct i2c_client *client)
        if (ret)
                goto err_pm;
 
+       v4l2_i2c_subdev_set_name(&imx290->sd, client,
+                                imx290->model->name, NULL);
+
        /*
         * Finally, register the V4L2 subdev. This must be done after
         * initializing everything as the subdev can be used immediately after
@@ -1670,6 +1707,9 @@ static const struct of_device_id imx290_of_match[] = {
        }, {
                .compatible = "sony,imx290llr",
                .data = &imx290_models[IMX290_MODEL_IMX290LLR],
+       }, {
+               .compatible = "sony,imx327lqr",
+               .data = &imx290_models[IMX290_MODEL_IMX327LQR],
        },
        { /* sentinel */ },
 };