#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
+#include <linux/io.h>
#include <linux/clk.h>
#include <linux/clkdev.h>
#include <plat/sram.h>
#include <plat/clkdev_omap.h>
+#include <mach/hardware.h>
+
#include "iomap.h"
#include "clock.h"
#include "opp.h"
*/
#include <linux/kernel.h>
+#include <linux/io.h>
#include <linux/clk.h>
#include <linux/cpufreq.h>
#include <linux/delay.h>
#include <plat/sram.h> /* for omap_sram_reprogram_clock() */
#include <plat/usb.h> /* for OTG_BASE */
+#include <mach/hardware.h>
+
#include "iomap.h"
#include "clock.h"
#include <plat/tc.h>
#include <plat/flash.h>
+#include <mach/hardware.h>
+
void omap1_set_vpp(struct platform_device *pdev, int enable)
{
static int count;
#include <plat/cpu.h>
+#include <mach/hardware.h>
+
#define OMAP_DIE_ID_0 0xfffe1800
#define OMAP_DIE_ID_1 0xfffe1804
#define OMAP_PRODUCTION_ID_0 0xfffe2000
* arch/arm/mach-omap1/include/mach/hardware.h
*/
+#ifndef __MACH_HARDWARE_H
+#define __MACH_HARDWARE_H
+
+#ifndef __ASSEMBLER__
+/*
+ * NOTE: Please use ioremap + __raw_read/write where possible instead of these
+ */
+extern u8 omap_readb(u32 pa);
+extern u16 omap_readw(u32 pa);
+extern u32 omap_readl(u32 pa);
+extern void omap_writeb(u8 v, u32 pa);
+extern void omap_writew(u16 v, u32 pa);
+extern void omap_writel(u32 v, u32 pa);
+
+#include <plat/tc.h>
+
+/* Almost all documentation for chip and board memory maps assumes
+ * BM is clear. Most devel boards have a switch to control booting
+ * from NOR flash (using external chipselect 3) rather than mask ROM,
+ * which uses BM to interchange the physical CS0 and CS3 addresses.
+ */
+static inline u32 omap_cs0m_phys(void)
+{
+ return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
+ ? OMAP_CS3_PHYS : 0;
+}
+
+static inline u32 omap_cs3_phys(void)
+{
+ return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
+ ? 0 : OMAP_CS3_PHYS;
+}
+
+#endif
+#endif
+
#include <plat/hardware.h>
/*
* arch/arm/mach-omap1/include/mach/io.h
+ *
+ * IO definitions for TI OMAP processors and boards
+ *
+ * Copied from arch/arm/mach-sa1100/include/mach/io.h
+ * Copyright (C) 1997-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Modifications:
+ * 06-12-1997 RMK Created.
+ * 07-04-1999 RMK Major cleanup
*/
-#include <plat/io.h>
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a) __typesafe_io(a)
+#define __mem_pci(a) (a)
+
+#endif
* Note that the is_lbus_device() test is not very efficient on 1510
* because of the strncmp().
*/
-#ifdef CONFIG_ARCH_OMAP15XX
+#if defined(CONFIG_ARCH_OMAP15XX) && !defined(__ASSEMBLER__)
+#include <plat/cpu.h>
/*
* OMAP-1510 Local Bus address offset
#include <linux/cpufreq.h>
#include <linux/slab.h>
+#include <plat/cpu.h>
#include <plat/clock.h>
#include <plat/sram.h>
#include <plat/sdrc.h>
#include <asm/div64.h>
#include <plat/clock.h>
+#include <plat/cpu.h>
#include "clock.h"
#include "cm-regbits-24xx.h"
*/
#include <linux/kernel.h>
+#include <linux/io.h>
#include <linux/clk.h>
#include <linux/list.h>
+#include <plat/hardware.h>
#include <plat/clkdev_omap.h>
#include "iomap.h"
#include <linux/clk.h>
#include <linux/io.h>
+#include <plat/hardware.h>
#include <plat/clock.h>
#include "iomap.h"
#include <linux/clk.h>
#include <linux/list.h>
+#include <plat/hardware.h>
#include <plat/clkdev_omap.h>
#include "iomap.h"
#include <linux/clk.h>
#include <linux/io.h>
+#include <plat/cpu.h>
#include <plat/clock.h>
#include "clock.h"
#include <linux/clk.h>
#include <linux/io.h>
+#include <plat/hardware.h>
#include <plat/clock.h>
#include "clock.h"
extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
struct omap_sdrc_params *sdrc_cs1);
+/*
+ * NOTE: Please use ioremap + __raw_read/write where possible instead of these
+ */
+extern u8 omap_readb(u32 pa);
+extern u16 omap_readw(u32 pa);
+extern u32 omap_readl(u32 pa);
+extern void omap_writeb(u8 v, u32 pa);
+extern void omap_writew(u16 v, u32 pa);
+extern void omap_writel(u32 v, u32 pa);
+
#endif /* __ASSEMBLER__ */
#endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */
#include <asm/mach/flash.h>
+#include <plat/cpu.h>
#include <plat/nand.h>
#include <plat/board.h>
#include <plat/gpmc.h>
#include <asm/mach/flash.h>
+#include <plat/cpu.h>
#include <plat/onenand.h>
#include <plat/board.h>
#include <plat/gpmc.h>
/*
* arch/arm/mach-omap2/include/mach/io.h
+ *
+ * IO definitions for TI OMAP processors and boards
+ *
+ * Copied from arch/arm/mach-sa1100/include/mach/io.h
+ * Copyright (C) 1997-1999 Russell King
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Modifications:
+ * 06-12-1997 RMK Created.
+ * 07-04-1999 RMK Major cleanup
*/
-#include <plat/io.h>
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a) __typesafe_io(a)
+#define __mem_pci(a) (a)
+
+#endif
* http://repository.maemo.org/pool/diablo/free/k/kernel-source-diablo/
*/
+#include <plat/hardware.h>
+
#include "opp2xxx.h"
#include "sdrc.h"
#include "clock.h"
* This is technically part of the OMAP2xxx clock code.
*/
+#include <plat/hardware.h>
+
#include "opp2xxx.h"
#include "sdrc.h"
#include "clock.h"
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/clk.h>
-#include <linux/io.h>
#include <linux/irq.h>
#include <linux/time.h>
#include <linux/gpio.h>
#include <mach/irqs.h>
-#include "iomap.h"
#include "common.h"
#include "prm2xxx_3xxx.h"
#include "prm-regbits-24xx.h"
#include <asm/assembler.h>
+#include <plat/hardware.h>
#include <plat/sram.h>
#include "iomap.h"
#include <asm/sched_clock.h>
+#include <plat/hardware.h>
#include <plat/common.h>
#include <plat/board.h>
}
#else
#define set_gdma_dev(req, dev) do {} while (0)
+#define omap_readl(reg) 0
+#define omap_writel(val, reg) do {} while (0)
#endif
void omap_set_dma_priority(int lch, int dst_port, int priority)
#include <plat/dmtimer.h>
+#include <mach/hardware.h>
+
static LIST_HEAD(omap_timer_list);
static DEFINE_SPINLOCK(dm_timer_lock);
#endif
#include <plat/serial.h>
+#ifdef __ASSEMBLER__
+#define IOMEM(x) (x)
+#else
+#define IOMEM(x) ((void __force __iomem *)(x))
+#endif
+
/*
* ---------------------------------------------------------------------------
* Common definitions for all OMAP processors
+++ /dev/null
-/*
- * arch/arm/plat-omap/include/mach/io.h
- *
- * IO definitions for TI OMAP processors and boards
- *
- * Copied from arch/arm/mach-sa1100/include/mach/io.h
- * Copyright (C) 1997-1999 Russell King
- *
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Modifications:
- * 06-12-1997 RMK Created.
- * 07-04-1999 RMK Major cleanup
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <mach/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * We don't actually have real ISA nor PCI buses, but there is so many
- * drivers out there that might just work if we fake them...
- */
-#define __io(a) __typesafe_io(a)
-#define __mem_pci(a) (a)
-
-/*
- * ----------------------------------------------------------------------------
- * I/O mapping
- * ----------------------------------------------------------------------------
- */
-
-#ifdef __ASSEMBLER__
-#define IOMEM(x) (x)
-#else
-#define IOMEM(x) ((void __force __iomem *)(x))
-#endif
-
-/*
- * ----------------------------------------------------------------------------
- * Omap specific register access
- * ----------------------------------------------------------------------------
- */
-
-#ifndef __ASSEMBLER__
-
-/*
- * NOTE: Please use ioremap + __raw_read/write where possible instead of these
- */
-
-extern u8 omap_readb(u32 pa);
-extern u16 omap_readw(u32 pa);
-extern u32 omap_readl(u32 pa);
-extern void omap_writeb(u8 v, u32 pa);
-extern void omap_writew(u16 v, u32 pa);
-extern void omap_writel(u32 v, u32 pa);
-
-#endif
-
-#endif
#define EMIFS_CCS(n) (EMIFS_CS0_CONFIG + (4 * (n)))
#define EMIFS_ACS(n) (EMIFS_ACS0 + (4 * (n)))
-/* Almost all documentation for chip and board memory maps assumes
- * BM is clear. Most devel boards have a switch to control booting
- * from NOR flash (using external chipselect 3) rather than mask ROM,
- * which uses BM to interchange the physical CS0 and CS3 addresses.
- */
-#ifdef CONFIG_ARCH_OMAP1
-static inline u32 omap_cs0m_phys(void)
-{
- return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
- ? OMAP_CS3_PHYS : 0;
-}
-
-static inline u32 omap_cs3_phys(void)
-{
- return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
- ? 0 : OMAP_CS3_PHYS;
-}
-#endif
-
#endif /* __ASSEMBLER__ */
#endif /* __ASM_ARCH_TC_H */
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/io.h>
-#include <asm/system.h>
#include <linux/spinlock.h>
+
+#include <asm/system.h>
+
+#include <plat/cpu.h>
#include <plat/mux.h>
#ifdef CONFIG_OMAP_MUX
#include <plat/usb.h>
#include <plat/board.h>
+#include <mach/hardware.h>
+
+#include "../mach-omap2/common.h"
+
#ifdef CONFIG_ARCH_OMAP_OTG
void __init
#include <asm/io.h>
+#include <plat/cpu.h>
+
#define RNG_OUT_REG 0x00 /* Output register */
#define RNG_STAT_REG 0x04 /* Status register
[0] = STAT_BUSY */
#include <linux/pm_runtime.h>
#include <video/omapdss.h>
+
+#include <plat/cpu.h>
#include <plat/clock.h>
+
#include "dss.h"
#include "dss_features.h"
projects / users / hch / configfs.git / commitdiff