staging: comedi: rtd520: remove RtdPlxInterruptRead macro

This macro uses the 'devpriv' macro which relies on a local variable
having a specific name. Plus it's just a wrapper around a simple
'readl'. Remove the macro.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/comedi/drivers/rtd520.c b/drivers/staging/comedi/drivers/rtd520.c
index 6d3e4d3300255adf4fe1f97bb248336d604614c1..486a7fc97d7d4a3589d8eb83daf3af0a9fd2fd9d 100644 (file)
--- a/drivers/staging/comedi/drivers/rtd520.c
+++ b/drivers/staging/comedi/drivers/rtd520.c
@@ -407,8 +407,6 @@ struct rtdPrivate {
 /* Macros to access registers */
 
 /* PLX9080 interrupt mask and status */
-#define RtdPlxInterruptRead(dev) \
-       readl(devpriv->lcfg+LCFG_ITCSR)
 #define RtdPlxInterruptWrite(dev, v) \
        writel(v, devpriv->lcfg+LCFG_ITCSR)
 
@@ -900,7 +898,7 @@ static irqreturn_t rtd_interrupt(int irq,   /* interrupt number (ignored) */
        }
 #ifdef USE_DMA
        if (devpriv->flags & DMA0_ACTIVE) {     /* Check DMA */
-               u32 istatus = RtdPlxInterruptRead(dev);
+               u32 istatus = readl(devpriv->lcfg + LCFG_ITCSR);
 
                if (istatus & ICS_DMA0_A) {
                        if (ai_process_dma(dev, s) < 0) {
@@ -1010,8 +1008,8 @@ transferDone:
        writew(devpriv->intMask, devpriv->las0 + LAS0_IT);
 #ifdef USE_DMA
        if (devpriv->flags & DMA0_ACTIVE) {
-               RtdPlxInterruptWrite(dev,       /* disable any more interrupts */
-                                    RtdPlxInterruptRead(dev) & ~ICS_DMA0_E);
+               RtdPlxInterruptWrite(dev,
+                       readl(devpriv->lcfg + LCFG_ITCSR) & ~ICS_DMA0_E);
                abort_dma(dev, 0);
                devpriv->flags &= ~DMA0_ACTIVE;
                /* if Using DMA, then we should have read everything by now */
@@ -1281,13 +1279,12 @@ static int rtd_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
        writew(devpriv->intMask, devpriv->las0 + LAS0_IT);
 #ifdef USE_DMA
        if (devpriv->flags & DMA0_ACTIVE) {     /* cancel anything running */
-               RtdPlxInterruptWrite(dev,       /* disable any more interrupts */
-                                    RtdPlxInterruptRead(dev) & ~ICS_DMA0_E);
+               RtdPlxInterruptWrite(dev,
+                       readl(devpriv->lcfg + LCFG_ITCSR) & ~ICS_DMA0_E);
                abort_dma(dev, 0);
                devpriv->flags &= ~DMA0_ACTIVE;
-               if (RtdPlxInterruptRead(dev) & ICS_DMA0_A) {    /*clear pending int */
+               if (readl(devpriv->lcfg + LCFG_ITCSR) & ICS_DMA0_A)
                        RtdDma0Control(dev, PLX_CLEAR_DMA_INTR_BIT);
-               }
        }
        writel(0, devpriv->las0 + LAS0_DMA0_RESET);
 #endif /* USE_DMA */
@@ -1449,14 +1446,13 @@ static int rtd_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
                RtdDma0Next(dev,        /* point to first block */
                            devpriv->dma0Chain[DMA_CHAIN_COUNT - 1].next);
                writel(DMAS_ADFIFO_HALF_FULL, devpriv->las0 + LAS0_DMA0_SRC);
-
-               RtdPlxInterruptWrite(dev,       /* enable interrupt */
-                                    RtdPlxInterruptRead(dev) | ICS_DMA0_E);
+               RtdPlxInterruptWrite(dev,
+                       readl(devpriv->lcfg + LCFG_ITCSR) | ICS_DMA0_E);
                /* Must be 2 steps.  See PLX app note about "Starting a DMA transfer" */
                RtdDma0Control(dev, PLX_DMA_EN_BIT);    /* enable DMA (clear INTR?) */
                RtdDma0Control(dev, PLX_DMA_EN_BIT | PLX_DMA_START_BIT);        /*start DMA */
                DPRINTK("rtd520: Using DMA0 transfers. plxInt %x RtdInt %x\n",
-                       RtdPlxInterruptRead(dev), devpriv->intMask);
+                       readl(devpriv->lcfg + LCFG_ITCSR), devpriv->intMask);
 #else /* USE_DMA */
                devpriv->intMask = IRQM_ADC_ABOUT_CNT;
                writew(devpriv->intMask, devpriv->las0 + LAS0_IT);
@@ -1486,8 +1482,8 @@ static int rtd_ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
        devpriv->aiCount = 0;   /* stop and don't transfer any more */
 #ifdef USE_DMA
        if (devpriv->flags & DMA0_ACTIVE) {
-               RtdPlxInterruptWrite(dev,       /* disable any more interrupts */
-                                    RtdPlxInterruptRead(dev) & ~ICS_DMA0_E);
+               RtdPlxInterruptWrite(dev,
+                       readl(devpriv->lcfg + LCFG_ITCSR) & ~ICS_DMA0_E);
                abort_dma(dev, 0);
                devpriv->flags &= ~DMA0_ACTIVE;
        }
@@ -1983,9 +1979,9 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 #endif /* USE_DMA */
        /* subdevices and priv are freed by the core */
        if (dev->irq) {
-               /* disable interrupt controller */
-               RtdPlxInterruptWrite(dev, RtdPlxInterruptRead(dev)
-                                    & ~(ICS_PLIE | ICS_DMA0_E | ICS_DMA1_E));
+               RtdPlxInterruptWrite(dev,
+                       readl(devpriv->lcfg + LCFG_ITCSR) &
+                               ~(ICS_PLIE | ICS_DMA0_E | ICS_DMA1_E));
                free_irq(dev->irq, dev);
        }
 
@@ -2052,9 +2048,9 @@ static void rtd_detach(struct comedi_device *dev)
                }
 #endif /* USE_DMA */
                if (dev->irq) {
-                       RtdPlxInterruptWrite(dev, RtdPlxInterruptRead(dev)
-                                            & ~(ICS_PLIE | ICS_DMA0_E |
-                                                ICS_DMA1_E));
+                       RtdPlxInterruptWrite(dev,
+                               readl(devpriv->lcfg + LCFG_ITCSR) &
+                                       ~(ICS_PLIE | ICS_DMA0_E | ICS_DMA1_E));
                        free_irq(dev->irq, dev);
                }
                if (devpriv->las0)