serial: 8250_dw: Set port capabilities based on CPR register

The Designware UART has an optional support for 16750
compatible Auto Flow Control. This will enable it based on
the AFCE bit in Component Parameter Register.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index 09aaea2d3a6ca8582d1ec2fc49658ff4102e02e7..b7c7d6a6cad75c47d95d2f02f0992500ed193976 100644 (file)
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -221,7 +221,11 @@ static void dw8250_setup_port(struct uart_8250_port *up)
                p->flags |= UPF_FIXED_TYPE;
                p->fifosize = DW_UART_CPR_FIFO_SIZE(reg);
                up->tx_loadsz = p->fifosize;
+               up->capabilities = UART_CAP_FIFO;
        }
+
+       if (reg & DW_UART_CPR_AFCE_MODE)
+               up->capabilities |= UART_CAP_AFE;
 }
 
 static int dw8250_probe(struct platform_device *pdev)