gpio/omap: conslidate enable/disable of GPIO IRQs, remove ifdefs

Cleanup GPIO IRQ enable/disable handling by removing SoC-specific

Also split enable/disable IRQ into separate functions for better
readability and also facilitate potentially moving to generic irq_chip
in the future.

Signed-off-by: Kevin Hilman <khilman@ti.com>

diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c
index 487a087496554ef3adc2ff3c620b463422c9994c..91756245e860f98d55991a308e1932f029a85307 100644 (file)
--- a/arch/arm/mach-omap1/gpio15xx.c
+++ b/arch/arm/mach-omap1/gpio15xx.c
@@ -39,6 +39,8 @@ static struct omap_gpio_reg_offs omap15xx_mpuio_regs = {
        .datain         = OMAP_MPUIO_INPUT_LATCH,
        .dataout        = OMAP_MPUIO_OUTPUT,
        .irqstatus      = OMAP_MPUIO_GPIO_INT,
+       .irqenable      = OMAP_MPUIO_GPIO_MASKIT,
+       .irqenable_inv  = true,
 };
 
 static struct __initdata omap_gpio_platform_data omap15xx_mpu_gpio_config = {
@@ -77,6 +79,8 @@ static struct omap_gpio_reg_offs omap15xx_gpio_regs = {
        .datain         = OMAP1510_GPIO_DATA_INPUT,
        .dataout        = OMAP1510_GPIO_DATA_OUTPUT,
        .irqstatus      = OMAP1510_GPIO_INT_STATUS,
+       .irqenable      = OMAP1510_GPIO_INT_MASK,
+       .irqenable_inv  = true,
 };
 
 static struct __initdata omap_gpio_platform_data omap15xx_gpio_config = {

diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c
index 3e52b7f3d9cbd5d468e47e3224898e3b5e0ad252..a6d4a71ea4af1f1aa11726cbff9a89ee60961c3c 100644 (file)
--- a/arch/arm/mach-omap1/gpio16xx.c
+++ b/arch/arm/mach-omap1/gpio16xx.c
@@ -42,6 +42,8 @@ static struct omap_gpio_reg_offs omap16xx_mpuio_regs = {
        .datain         = OMAP_MPUIO_INPUT_LATCH,
        .dataout        = OMAP_MPUIO_OUTPUT,
        .irqstatus      = OMAP_MPUIO_GPIO_INT,
+       .irqenable      = OMAP_MPUIO_GPIO_MASKIT,
+       .irqenable_inv  = true,
 };
 
 static struct __initdata omap_gpio_platform_data omap16xx_mpu_gpio_config = {
@@ -82,6 +84,9 @@ static struct omap_gpio_reg_offs omap16xx_gpio_regs = {
        .datain         = OMAP1610_GPIO_DATAIN,
        .dataout        = OMAP1610_GPIO_DATAOUT,
        .irqstatus      = OMAP1610_GPIO_IRQSTATUS1,
+       .irqenable      = OMAP1610_GPIO_IRQENABLE1,
+       .set_irqenable  = OMAP1610_GPIO_SET_IRQENABLE1,
+       .clr_irqenable  = OMAP1610_GPIO_CLEAR_IRQENABLE1,
 };
 
 static struct __initdata omap_gpio_platform_data omap16xx_gpio1_config = {

diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c
index 35e8b31688d04354d208d90aba6392cdfad3ace6..12bcd9f2864a483dfebe46a051a33694c9d664a4 100644 (file)
--- a/arch/arm/mach-omap1/gpio7xx.c
+++ b/arch/arm/mach-omap1/gpio7xx.c
@@ -44,6 +44,8 @@ static struct omap_gpio_reg_offs omap7xx_mpuio_regs = {
        .datain         = OMAP_MPUIO_INPUT_LATCH / 2,
        .dataout        = OMAP_MPUIO_OUTPUT / 2,
        .irqstatus      = OMAP_MPUIO_GPIO_INT / 2,
+       .irqenable      = OMAP_MPUIO_GPIO_MASKIT / 2,
+       .irqenable_inv  = true,
 };
 
 static struct __initdata omap_gpio_platform_data omap7xx_mpu_gpio_config = {
@@ -82,6 +84,8 @@ static struct omap_gpio_reg_offs omap7xx_gpio_regs = {
        .datain         = OMAP7XX_GPIO_DATA_INPUT,
        .dataout        = OMAP7XX_GPIO_DATA_OUTPUT,
        .irqstatus      = OMAP7XX_GPIO_INT_STATUS,
+       .irqenable      = OMAP7XX_GPIO_INT_MASK,
+       .irqenable_inv  = true,
 };
 
 static struct __initdata omap_gpio_platform_data omap7xx_gpio1_config = {

diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
index 7c5e67d0b635d49d8702668cc1919d1348289b6d..cc26677a12f89964bf2c1487a74abe5ec5325e44 100644 (file)
--- a/arch/arm/mach-omap2/gpio.c
+++ b/arch/arm/mach-omap2/gpio.c
@@ -78,6 +78,9 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
                pdata->regs->clr_dataout = OMAP24XX_GPIO_CLEARDATAOUT;
                pdata->regs->irqstatus = OMAP24XX_GPIO_IRQSTATUS1;
                pdata->regs->irqstatus2 = OMAP24XX_GPIO_IRQSTATUS2;
+               pdata->regs->irqenable = OMAP24XX_GPIO_IRQENABLE1;
+               pdata->regs->set_irqenable = OMAP24XX_GPIO_SETIRQENABLE1;
+               pdata->regs->clr_irqenable = OMAP24XX_GPIO_CLEARIRQENABLE1;
                break;
        case 2:
                pdata->bank_type = METHOD_GPIO_44XX;
@@ -88,6 +91,9 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
                pdata->regs->clr_dataout = OMAP4_GPIO_CLEARDATAOUT;
                pdata->regs->irqstatus = OMAP4_GPIO_IRQSTATUS0;
                pdata->regs->irqstatus2 = OMAP4_GPIO_IRQSTATUS1;
+               pdata->regs->irqenable = OMAP4_GPIO_IRQSTATUSSET0;
+               pdata->regs->set_irqenable = OMAP4_GPIO_IRQSTATUSSET0;
+               pdata->regs->clr_irqenable = OMAP4_GPIO_IRQSTATUSCLR0;
                break;
        default:
                WARN(1, "Invalid gpio bank_type\n");

diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h
index aedd732ef464bc70c2c4111721ed6c6c2797f24f..c7e3a56340c0351f0988e7c5f7f7039c501ecfef 100644 (file)
--- a/arch/arm/plat-omap/include/plat/gpio.h
+++ b/arch/arm/plat-omap/include/plat/gpio.h
@@ -182,6 +182,11 @@ struct omap_gpio_reg_offs {
        u16 clr_dataout;
        u16 irqstatus;
        u16 irqstatus2;
+       u16 irqenable;
+       u16 set_irqenable;
+       u16 clr_irqenable;
+
+       bool irqenable_inv;
 };
 
 struct omap_gpio_platform_data {

diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index bdf0132b70ec268a3986c36897a462a6f368d116..6afca28a8c677a713353e0785890cb57871e43a7 100644 (file)
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -502,129 +502,60 @@ static inline void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio)
 static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
 {
        void __iomem *reg = bank->base;
-       int inv = 0;
        u32 l;
        u32 mask = (1 << bank->width) - 1;
 
-       switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
-       case METHOD_MPUIO:
-               reg += OMAP_MPUIO_GPIO_MASKIT / bank->stride;
-               inv = 1;
-               break;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
-       case METHOD_GPIO_1510:
-               reg += OMAP1510_GPIO_INT_MASK;
-               inv = 1;
-               break;
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-       case METHOD_GPIO_1610:
-               reg += OMAP1610_GPIO_IRQENABLE1;
-               break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-       case METHOD_GPIO_7XX:
-               reg += OMAP7XX_GPIO_INT_MASK;
-               inv = 1;
-               break;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-       case METHOD_GPIO_24XX:
-               reg += OMAP24XX_GPIO_IRQENABLE1;
-               break;
-#endif
-#if defined(CONFIG_ARCH_OMAP4)
-       case METHOD_GPIO_44XX:
-               reg += OMAP4_GPIO_IRQSTATUSSET0;
-               break;
-#endif
-       default:
-               WARN_ON(1);
-               return 0;
-       }
-
+       reg += bank->regs->irqenable;
        l = __raw_readl(reg);
-       if (inv)
+       if (bank->regs->irqenable_inv)
                l = ~l;
        l &= mask;
        return l;
 }
 
-static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enable)
+static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
 {
        void __iomem *reg = bank->base;
        u32 l;
 
-       switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
-       case METHOD_MPUIO:
-               reg += OMAP_MPUIO_GPIO_MASKIT / bank->stride;
-               l = __raw_readl(reg);
-               if (enable)
-                       l &= ~(gpio_mask);
-               else
-                       l |= gpio_mask;
-               break;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
-       case METHOD_GPIO_1510:
-               reg += OMAP1510_GPIO_INT_MASK;
+       if (bank->regs->set_irqenable) {
+               reg += bank->regs->set_irqenable;
+               l = gpio_mask;
+       } else {
+               reg += bank->regs->irqenable;
                l = __raw_readl(reg);
-               if (enable)
-                       l &= ~(gpio_mask);
+               if (bank->regs->irqenable_inv)
+                       l &= ~gpio_mask;
                else
                        l |= gpio_mask;
-               break;
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-       case METHOD_GPIO_1610:
-               if (enable)
-                       reg += OMAP1610_GPIO_SET_IRQENABLE1;
-               else
-                       reg += OMAP1610_GPIO_CLEAR_IRQENABLE1;
+       }
+
+       __raw_writel(l, reg);
+}
+
+static void _disable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
+{
+       void __iomem *reg = bank->base;
+       u32 l;
+
+       if (bank->regs->clr_irqenable) {
+               reg += bank->regs->clr_irqenable;
                l = gpio_mask;
-               break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-       case METHOD_GPIO_7XX:
-               reg += OMAP7XX_GPIO_INT_MASK;
+       } else {
+               reg += bank->regs->irqenable;
                l = __raw_readl(reg);
-               if (enable)
-                       l &= ~(gpio_mask);
-               else
+               if (bank->regs->irqenable_inv)
                        l |= gpio_mask;
-               break;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-       case METHOD_GPIO_24XX:
-               if (enable)
-                       reg += OMAP24XX_GPIO_SETIRQENABLE1;
-               else
-                       reg += OMAP24XX_GPIO_CLEARIRQENABLE1;
-               l = gpio_mask;
-               break;
-#endif
-#ifdef CONFIG_ARCH_OMAP4
-       case METHOD_GPIO_44XX:
-               if (enable)
-                       reg += OMAP4_GPIO_IRQSTATUSSET0;
                else
-                       reg += OMAP4_GPIO_IRQSTATUSCLR0;
-               l = gpio_mask;
-               break;
-#endif
-       default:
-               WARN_ON(1);
-               return;
+                       l &= ~gpio_mask;
        }
+
        __raw_writel(l, reg);
 }
 
 static inline void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int enable)
 {
-       _enable_gpio_irqbank(bank, GPIO_BIT(bank, gpio), enable);
+       _enable_gpio_irqbank(bank, GPIO_BIT(bank, gpio));
 }
 
 /*
@@ -831,9 +762,9 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
                /* clear edge sensitive interrupts before handler(s) are
                called so that we don't miss any interrupt occurred while
                executing them */
-               _enable_gpio_irqbank(bank, isr_saved & ~level_mask, 0);
+               _disable_gpio_irqbank(bank, isr_saved & ~level_mask);
                _clear_gpio_irqbank(bank, isr_saved & ~level_mask);
-               _enable_gpio_irqbank(bank, isr_saved & ~level_mask, 1);
+               _enable_gpio_irqbank(bank, isr_saved & ~level_mask);
 
                /* if there is only edge sensitive GPIO pin interrupts
                configured, we could unmask GPIO bank interrupt immediately */