dt-bindings: mtd: brcmnand: Add ecc strap property

Add brcm,nand-ecc-use-strap to get ecc and spare area size settings from
board boot strap for broadband board designs because they do not specify
ecc setting in dts but rather using the strap setting.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240223034758.13753-7-william.zhang@broadcom.com

diff --git a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
index 6a717bcedfd39f5469378abb51e4eb673f1527c5..064e840aeaa1159d17c4e5bf61a2f61c64e702eb 100644 (file)
--- a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
+++ b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
@@ -146,6 +146,15 @@ patternProperties:
           layout.
         $ref: /schemas/types.yaml#/definitions/uint32
 
+      brcm,nand-ecc-use-strap:
+        description:
+          This property requires the host system to get the ECC related
+          settings from the SoC NAND boot strap configuration instead of
+          the generic NAND ECC settings. This is a common hardware design
+          on BCMBCA based boards. This strap ECC option and generic NAND
+          ECC option can not be specified at the same time.
+        $ref: /schemas/types.yaml#/definitions/flag
+
     unevaluatedProperties: false
 
 allOf:
@@ -195,6 +204,21 @@ allOf:
       required:
         - interrupt-names
 
+  - if:
+      patternProperties:
+        "^nand@[a-f0-9]$":
+          required:
+            - brcm,nand-ecc-use-strap
+    then:
+      patternProperties:
+        "^nand@[a-f0-9]$":
+          properties:
+            nand-ecc-strength: false
+            nand-ecc-step-size: false
+            nand-ecc-maximize: false
+            nand-ecc-algo: false
+            brcm,nand-oob-sector-size: false
+
 unevaluatedProperties: false
 
 required: