arm64: dts: qcom: sa8775p-ride: enable EMAC1

Enable the second MAC on sa8775p-ride.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230810080909.6259-10-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
index 2caee299d41058c71859c43bdd177a02bb1a279e..038d3a464bd93764ad40d29bd404b95849fba5f1 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
+++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
@@ -17,6 +17,7 @@
 
        aliases {
                ethernet0 = &ethernet0;
+               ethernet1 = &ethernet1;
                i2c11 = &i2c11;
                i2c18 = &i2c18;
                serial0 = &uart10;
@@ -359,6 +360,76 @@
        };
 };
 
+&ethernet1 {
+       phy-mode = "sgmii";
+       phy-handle = <&sgmii_phy1>;
+
+       snps,mtl-rx-config = <&mtl_rx_setup1>;
+       snps,mtl-tx-config = <&mtl_tx_setup1>;
+       snps,ps-speed = <1000>;
+
+       status = "okay";
+
+       mtl_rx_setup1: rx-queues-config {
+               snps,rx-queues-to-use = <4>;
+               snps,rx-sched-sp;
+
+               queue0 {
+                       snps,dcb-algorithm;
+                       snps,map-to-dma-channel = <0x0>;
+                       snps,route-up;
+                       snps,priority = <0x1>;
+               };
+
+               queue1 {
+                       snps,dcb-algorithm;
+                       snps,map-to-dma-channel = <0x1>;
+                       snps,route-ptp;
+               };
+
+               queue2 {
+                       snps,avb-algorithm;
+                       snps,map-to-dma-channel = <0x2>;
+                       snps,route-avcp;
+               };
+
+               queue3 {
+                       snps,avb-algorithm;
+                       snps,map-to-dma-channel = <0x3>;
+                       snps,priority = <0xc>;
+               };
+       };
+
+       mtl_tx_setup1: tx-queues-config {
+               snps,tx-queues-to-use = <4>;
+               snps,tx-sched-sp;
+
+               queue0 {
+                       snps,dcb-algorithm;
+               };
+
+               queue1 {
+                       snps,dcb-algorithm;
+               };
+
+               queue2 {
+                       snps,avb-algorithm;
+                       snps,send_slope = <0x1000>;
+                       snps,idle_slope = <0x1000>;
+                       snps,high_credit = <0x3e800>;
+                       snps,low_credit = <0xffc18000>;
+               };
+
+               queue3 {
+                       snps,avb-algorithm;
+                       snps,send_slope = <0x1000>;
+                       snps,idle_slope = <0x1000>;
+                       snps,high_credit = <0x3e800>;
+                       snps,low_credit = <0xffc18000>;
+               };
+       };
+};
+
 &i2c11 {
        clock-frequency = <400000>;
        pinctrl-0 = <&qup_i2c11_default>;