ARM: dts: exynos: move I2C10 out of soc node on Arndale

I2C10 is represented as i2c-gpio device, thus it is not really a part of
soc MMIO bus:

  exynos5250-arndale.dtb: soc: i2c-10: {'pinctrl-names': ['default'], ... } should not be valid under {'type': 'object'}

Link: https://lore.kernel.org/r/20230207210020.677007-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 305289ed06d8334502778726fdeb7d02b79bee41..6134bc9c8212bd0b4c235c3e40a1af178cdea9dc 100644 (file)
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -73,6 +73,19 @@
                };
        };
 
+       /*
+        * For unknown reasons HDMI-DDC does not work with Exynos I2C
+        * controllers. Lets use software I2C over GPIO pins as a workaround.
+        */
+       i2c_ddc: i2c-10 {
+               compatible = "i2c-gpio";
+               pinctrl-names = "default";
+               pinctrl-0 = <&i2c2_gpio_bus>;
+               sda-gpios = <&gpa0 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+               scl-gpios = <&gpa0 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+               i2c-gpio,delay-us = <2>;
+       };
+
        panel: panel {
                compatible = "boe,hv070wsa-100";
                power-supply = <&vcc_3v3_reg>;
@@ -615,21 +628,6 @@
        status = "okay";
 };
 
-&soc {
-       /*
-        * For unknown reasons HDMI-DDC does not work with Exynos I2C
-        * controllers. Lets use software I2C over GPIO pins as a workaround.
-        */
-       i2c_ddc: i2c-10 {
-               pinctrl-names = "default";
-               pinctrl-0 = <&i2c2_gpio_bus>;
-               compatible = "i2c-gpio";
-               sda-gpios = <&gpa0 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-               scl-gpios = <&gpa0 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-               i2c-gpio,delay-us = <2>;
-       };
-};
-
 &usbdrd {
        vdd10-supply = <&ldo15_reg>;
        vdd33-supply = <&ldo12_reg>;