ARM: dts: qcom: apq8064: Add PCIe bridge node

On Qcom SoCs, the PCIe host bridge is connected to a single PCIe bridge
for each controller instance. Hence, add a node to represent the bridge.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240321-pcie-qcom-bridge-dts-v2-19-1eb790c53e43@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
index c428a5c16c65a01e9c4d07f5d4a5138f8d1b22d4..11e60b74c3c9d84c30e9eba5fbdb639a2595a646 100644 (file)
--- a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
@@ -1334,6 +1334,16 @@
                                 <&gcc PCIE_PHY_RESET>;
                        reset-names = "axi", "ahb", "por", "pci", "phy";
                        status = "disabled";
+
+                       pcie@0 {
+                               device_type = "pci";
+                               reg = <0x0 0x0 0x0 0x0 0x0>;
+                               bus-range = <0x01 0xff>;
+
+                               #address-cells = <3>;
+                               #size-cells = <2>;
+                               ranges;
+                       };
                };
 
                hdmi: hdmi-tx@4a00000 {