err = mlx5_core_modify_tir(mdev, priv->indir_tir[tt].tirn, in);
if (err)
goto free_in;
+
+ /* Verify inner tirs resources allocated */
+ if (!priv->inner_indir_tir[0].tirn)
+ continue;
+
+ err = mlx5_core_modify_tir(mdev, priv->inner_indir_tir[tt].tirn, in);
+ if (err)
+ goto free_in;
}
for (ix = 0; ix < priv->max_nch; ix++) {
netdev->hw_enc_features |= NETIF_F_HW_VLAN_CTAG_TX;
netdev->hw_enc_features |= NETIF_F_HW_VLAN_CTAG_RX;
+ /* Tunneled LRO is not supported in the driver, and the same RQs are
+ * shared between inner and outer TIRs, so the driver can't disable LRO
+ * for inner TIRs while having it enabled for outer TIRs. Due to this,
+ * block LRO altogether if the firmware declares tunneled LRO support.
+ */
if (!!MLX5_CAP_ETH(mdev, lro_cap) &&
+ !MLX5_CAP_ETH(mdev, tunnel_lro_vxlan) &&
+ !MLX5_CAP_ETH(mdev, tunnel_lro_gre) &&
mlx5e_check_fragmented_striding_rq_cap(mdev))
netdev->vlan_features |= NETIF_F_LRO;
u8 scatter_fcs[0x1];
u8 enhanced_multi_pkt_send_wqe[0x1];
u8 tunnel_lso_const_out_ip_id[0x1];
- u8 reserved_at_1c[0x2];
+ u8 tunnel_lro_gre[0x1];
+ u8 tunnel_lro_vxlan[0x1];
u8 tunnel_stateless_gre[0x1];
u8 tunnel_stateless_vxlan[0x1];