arm64: dts: rockchip: fix rk3562 pcie unit addresses

The rk3562 pcie node currently uses the apb register as its unit address
which is the second reg area defined in the binding.

As can be seen by the dtc warnings like

../arch/arm64/boot/dts/rockchip/rk3562.dtsi:624.26-675.5: Warning (simple_bus_reg): /soc/pcie@ff500000: simple-bus unit address format error, expected "fe000000"

using the first reg area as the unit address seems to be preferred.
This is the dbi area per the binding, so adapt the unit address accordingly
and move the nodes to their new position.

With the move also move the reg + reg-names below the compatible, as is the
preferred position.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250518220449.2722673-6-heiko@sntech.de

diff --git a/arch/arm64/boot/dts/rockchip/rk3562.dtsi b/arch/arm64/boot/dts/rockchip/rk3562.dtsi
index 6268f84efa13e68bf24ee54c23606d703019ddc2..292e82ec5d4548ce68dced781f3d31bfd7ed3893 100644 (file)
--- a/arch/arm64/boot/dts/rockchip/rk3562.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3562.dtsi
@@ -249,6 +249,59 @@
                #size-cells = <2>;
                ranges;
 
+               pcie2x1: pcie@fe000000 {
+                       compatible = "rockchip,rk3562-pcie", "rockchip,rk3568-pcie";
+                       reg = <0x0 0xfe000000 0x0 0x400000>,
+                             <0x0 0xff500000 0x0 0x10000>,
+                             <0x0 0xfc000000 0x0 0x100000>;
+                       reg-names = "dbi", "apb", "config";
+                       bus-range = <0x0 0xff>;
+                       clocks = <&cru ACLK_PCIE20_MST>, <&cru ACLK_PCIE20_SLV>,
+                                <&cru ACLK_PCIE20_DBI>, <&cru PCLK_PCIE20>,
+                                <&cru CLK_PCIE20_AUX>;
+                       clock-names = "aclk_mst", "aclk_slv",
+                                     "aclk_dbi", "pclk", "aux";
+                       device_type = "pci";
+                       interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupt-names = "sys", "pmc", "msg", "legacy", "err", "msi";
+                       #interrupt-cells = <1>;
+                       interrupt-map-mask = <0 0 0 7>;
+                       interrupt-map = <0 0 0 1 &pcie2x1_intc 0>,
+                                       <0 0 0 2 &pcie2x1_intc 1>,
+                                       <0 0 0 3 &pcie2x1_intc 2>,
+                                       <0 0 0 4 &pcie2x1_intc 3>;
+                       linux,pci-domain = <0>;
+                       max-link-speed = <2>;
+                       num-ib-windows = <8>;
+                       num-viewport = <8>;
+                       num-ob-windows = <2>;
+                       num-lanes = <1>;
+                       phys = <&combphy PHY_TYPE_PCIE>;
+                       phy-names = "pcie-phy";
+                       power-domains = <&power 15>;
+                       ranges = <0x01000000 0x0 0xfc100000 0x0 0xfc100000 0x0 0x100000
+                                 0x02000000 0x0 0xfc200000 0x0 0xfc200000 0x0 0x1e00000
+                                 0x03000000 0x3 0x00000000 0x3 0x00000000 0x0 0x40000000>;
+                       resets = <&cru SRST_PCIE20_POWERUP>;
+                       reset-names = "pipe";
+                       #address-cells = <3>;
+                       #size-cells = <2>;
+                       status = "disabled";
+
+                       pcie2x1_intc: legacy-interrupt-controller {
+                               interrupt-controller;
+                               #address-cells = <0>;
+                               #interrupt-cells = <1>;
+                               interrupt-parent = <&gic>;
+                               interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+                       };
+               };
+
                gic: interrupt-controller@fe901000 {
                        compatible = "arm,gic-400";
                        #interrupt-cells = <3>;
@@ -621,59 +674,6 @@
                        status = "disabled";
                };
 
-               pcie2x1: pcie@ff500000 {
-                       compatible = "rockchip,rk3562-pcie", "rockchip,rk3568-pcie";
-                       bus-range = <0x0 0xff>;
-                       clocks = <&cru ACLK_PCIE20_MST>, <&cru ACLK_PCIE20_SLV>,
-                                <&cru ACLK_PCIE20_DBI>, <&cru PCLK_PCIE20>,
-                                <&cru CLK_PCIE20_AUX>;
-                       clock-names = "aclk_mst", "aclk_slv",
-                                     "aclk_dbi", "pclk", "aux";
-                       device_type = "pci";
-                       interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
-                                    <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
-                                    <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-                                    <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
-                                    <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
-                                    <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
-                       interrupt-names = "sys", "pmc", "msg", "legacy", "err", "msi";
-                       #interrupt-cells = <1>;
-                       interrupt-map-mask = <0 0 0 7>;
-                       interrupt-map = <0 0 0 1 &pcie2x1_intc 0>,
-                                       <0 0 0 2 &pcie2x1_intc 1>,
-                                       <0 0 0 3 &pcie2x1_intc 2>,
-                                       <0 0 0 4 &pcie2x1_intc 3>;
-                       linux,pci-domain = <0>;
-                       max-link-speed = <2>;
-                       num-ib-windows = <8>;
-                       num-viewport = <8>;
-                       num-ob-windows = <2>;
-                       num-lanes = <1>;
-                       phys = <&combphy PHY_TYPE_PCIE>;
-                       phy-names = "pcie-phy";
-                       power-domains = <&power 15>;
-                       ranges = <0x01000000 0x0 0xfc100000 0x0 0xfc100000 0x0 0x100000
-                                 0x02000000 0x0 0xfc200000 0x0 0xfc200000 0x0 0x1e00000
-                                 0x03000000 0x3 0x00000000 0x3 0x00000000 0x0 0x40000000>;
-                       reg = <0x0 0xfe000000 0x0 0x400000>,
-                             <0x0 0xff500000 0x0 0x10000>,
-                             <0x0 0xfc000000 0x0 0x100000>;
-                       reg-names = "dbi", "apb", "config";
-                       resets = <&cru SRST_PCIE20_POWERUP>;
-                       reset-names = "pipe";
-                       #address-cells = <3>;
-                       #size-cells = <2>;
-                       status = "disabled";
-
-                       pcie2x1_intc: legacy-interrupt-controller {
-                               interrupt-controller;
-                               #address-cells = <0>;
-                               #interrupt-cells = <1>;
-                               interrupt-parent = <&gic>;
-                               interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
-                       };
-               };
-
                spi1: spi@ff640000 {
                        compatible = "rockchip,rk3066-spi";
                        reg = <0x0 0xff640000 0x0 0x1000>;