boot := arch/arc/boot
-#default target for make without any arguements.
+#default target for make without any arguments.
KBUILD_IMAGE := bootpImage
all: $(KBUILD_IMAGE)
* We need to be a bit more cautious here. What if a kernel bug in
* L1 ISR, caused SP to go whaco (some small value which looks like
* USER stk) and then we take L2 ISR.
- * Above brlo alone would treat it as a valid L1-L2 sceanrio
- * instead of shouting alound
+ * Above brlo alone would treat it as a valid L1-L2 scenario
+ * instead of shouting around
* The only feasible way is to make sure this L2 happened in
* L1 prelogue ONLY i.e. ilink2 is less than a pre-set marker in
* L1 ISR before it switches stack
local_flush_tlb_all();
/*
- * Above checke for rollover of 8 bit ASID in 32 bit container.
+ * Above check for rollover of 8 bit ASID in 32 bit container.
* If the container itself wrapped around, set it to a non zero
* "generation" to distinguish from no context
*/
* Page Tables are purely for Linux VM's consumption and the bits below are
* suited to that (uniqueness). Hence some are not implemented in the TLB and
* some have different value in TLB.
- * e.g. MMU v2: K_READ bit is 8 and so is GLOBAL (possible becoz they live in
+ * e.g. MMU v2: K_READ bit is 8 and so is GLOBAL (possible because they live in
* seperate PD0 and PD1, which combined forms a translation entry)
* while for PTE perspective, they are 8 and 9 respectively
* with MMU v3: Most bits (except SHARED) represent the exact hardware pos
#define KSTK_ESP(tsk) (task_pt_regs(tsk)->sp)
/*
- * Where abouts of Task's sp, fp, blink when it was last seen in kernel mode.
+ * Where about of Task's sp, fp, blink when it was last seen in kernel mode.
* Look in process.c for details of kernel stack layout
*/
#define TSK_K_ESP(tsk) (tsk->thread.ksp)
* (1) These insn were introduced only in 4.10 release. So for older released
* support needed.
*
- * (2) In a SMP setup, the LLOCK/SCOND atomiticity across CPUs needs to be
+ * (2) In a SMP setup, the LLOCK/SCOND atomicity across CPUs needs to be
* gaurantted by the platform (not something which core handles).
* Assuming a platform won't, SMP Linux needs to use spinlocks + local IRQ
* disabling for atomicity.
/*
* _TIF_ALLWORK_MASK includes SYSCALL_TRACE, but we don't need it.
- * SYSCALL_TRACE is anways seperately/unconditionally tested right after a
+ * SYSCALL_TRACE is anyway seperately/unconditionally tested right after a
* syscall, so all that reamins to be tested is _TIF_WORK_MASK
*/
#define __kernel_ok (segment_eq(get_fs(), KERNEL_DS))
/*
- * Algorthmically, for __user_ok() we want do:
+ * Algorithmically, for __user_ok() we want do:
* (start < TASK_SIZE) && (start+len < TASK_SIZE)
* where TASK_SIZE could either be retrieved from thread_info->addr_limit or
* emitted directly in code.
__tmp ^ __in; \
})
-#elif (ARC_BSWAP_TYPE == 2) /* Custom single cycle bwap instruction */
+#elif (ARC_BSWAP_TYPE == 2) /* Custom single cycle bswap instruction */
#define __arch_swab32(x) \
({ \
int64_t delta = new_raw_count - prev_raw_count;
/*
- * We don't afaraid of hwc->prev_count changing beneath our feet
+ * We aren't afraid of hwc->prev_count changing beneath our feet
* because there's no way for us to re-enter this function anytime.
*/
local64_set(&hwc->prev_count, new_raw_count);
/*
* If we are here, it is established that @uboot_arg didn't
* point to DT blob. Instead if u-boot says it is cmdline,
- * Appent to embedded DT cmdline.
+ * append to embedded DT cmdline.
* setup_machine_fdt() would have populated @boot_command_line
*/
if (uboot_tag == 1) {
* -ViXS were still seeing crashes when using insmod to load drivers.
* It turned out that the code to change Execute permssions for TLB entries
* of user was not guarded for interrupts (mod_tlb_permission)
- * This was cauing TLB entries to be overwritten on unrelated indexes
+ * This was causing TLB entries to be overwritten on unrelated indexes
*
* Vineetg: July 15th 2008: Bug #94183
* -Exception happens in Delay slot of a JMP, and before user space resumes,
return 0;
}
-/* called on user read(): display the couters */
+/* called on user read(): display the counters */
static ssize_t tlb_stats_output(struct file *file, /* file descriptor */
char __user *user_buf, /* user buffer */
size_t len, /* length of buffer */
* ------------------
* This ver of MMU supports variable page sizes (1k-16k): although Linux will
* only support 8k (default), 16k and 4k.
- * However from hardware perspective, smaller page sizes aggrevate aliasing
+ * However from hardware perspective, smaller page sizes aggravate aliasing
* meaning more vaddr bits needed to disambiguate the cache-line-op ;
* the existing scheme of piggybacking won't work for certain configurations.
* Two new registers IC_PTAG and DC_PTAG inttoduced.
/*
* This is technically for MMU v4, using the MMU v3 programming model
- * Special work for HS38 aliasing I-cache configuratino with PAE40
+ * Special work for HS38 aliasing I-cache configuration with PAE40
* - upper 8 bits of paddr need to be written into PTAG_HI
* - (and needs to be written before the lower 32 bits)
* Note that PTAG_HI is hoisted outside the line loop
ic->ver, CONFIG_ARC_MMU_VER);
/*
- * In MMU v4 (HS38x) the alising icache config uses IVIL/PTAG
+ * In MMU v4 (HS38x) the aliasing icache config uses IVIL/PTAG
* pair to provide vaddr/paddr respectively, just as in MMU v3
*/
if (is_isa_arcv2() && ic->alias)
* DMA Coherent API Notes
*
* I/O is inherently non-coherent on ARC. So a coherent DMA buffer is
- * implemented by accessintg it using a kernel virtual address, with
+ * implemented by accessing it using a kernel virtual address, with
* Cache bit off in the TLB entry.
*
* The default DMA address == Phy address which is 0x8000_0000 based.
projects / users / willy / pagecache.git / commitdiff