#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/string.h>
+#include <linux/stringify.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/fs.h>
*/
static int max_sectors = SBP2_MAX_SECTORS;
module_param(max_sectors, int, 0444);
-MODULE_PARM_DESC(max_sectors, "Change max sectors per I/O supported (default = 255)");
+MODULE_PARM_DESC(max_sectors, "Change max sectors per I/O supported (default = "
+ __stringify(SBP2_MAX_SECTORS) ")");
/*
* Exclusive login to sbp2 device? In most cases, the sbp2 driver should
MODULE_PARM_DESC(exclusive_login, "Exclusive login to sbp2 device (default = 1)");
/*
- * SCSI inquiry hack for really badly behaved sbp2 devices. Turn this on
- * if your sbp2 device is not properly handling the SCSI inquiry command.
- * This hack makes the inquiry look more like a typical MS Windows inquiry
- * by enforcing 36 byte inquiry and avoiding access to mode_sense page 8.
+ * If any of the following workarounds is required for your device to work,
+ * please submit the kernel messages logged by sbp2 to the linux1394-devel
+ * mailing list.
*
- * If force_inquiry_hack=1 is required for your device to work,
- * please submit the logged sbp2_firmware_revision value of this device to
- * the linux1394-devel mailing list.
+ * - 128kB max transfer
+ * Limit transfer size. Necessary for some old bridges.
+ *
+ * - 36 byte inquiry
+ * When scsi_mod probes the device, let the inquiry command look like that
+ * from MS Windows.
+ *
+ * - skip mode page 8
+ * Suppress sending of mode_sense for mode page 8 if the device pretends to
+ * support the SCSI Primary Block commands instead of Reduced Block Commands.
*/
+static int sbp2_default_workarounds;
+module_param_named(workarounds, sbp2_default_workarounds, int, 0644);
+MODULE_PARM_DESC(workarounds, "Work around device bugs (default = 0"
+ ", 128kB max transfer = " __stringify(SBP2_WORKAROUND_128K_MAX_TRANS)
+ ", 36 byte inquiry = " __stringify(SBP2_WORKAROUND_INQUIRY_36)
+ ", skip mode page 8 = " __stringify(SBP2_WORKAROUND_MODE_SENSE_8)
+ ", or a combination)");
+
+/* legacy parameter */
static int force_inquiry_hack;
module_param(force_inquiry_hack, int, 0644);
-MODULE_PARM_DESC(force_inquiry_hack, "Force SCSI inquiry hack (default = 0)");
+MODULE_PARM_DESC(force_inquiry_hack, "Deprecated, use 'workarounds'");
/*
* Export information about protocols/devices supported by this driver.
};
/*
- * List of device firmwares that require the inquiry hack.
- * Yields a few false positives but did not break other devices so far.
+ * List of devices with known bugs.
+ *
+ * The firmware_revision field, masked with 0xffff00, is the best indicator
+ * for the type of bridge chip of a device. It yields a few false positives
+ * but this did not break correctly behaving devices so far.
*/
-static u32 sbp2_broken_inquiry_list[] = {
- 0x00002800, /* Stefan Richter <stefanr@s5r6.in-berlin.de> */
- /* DViCO Momobay CX-1 */
- 0x00000200 /* Andreas Plesch <plesch@fas.harvard.edu> */
- /* QPS Fire DVDBurner */
+static const struct {
+ u32 firmware_revision;
+ unsigned workarounds;
+} sbp2_workarounds_table[] = {
+ /* TSB42AA9 */ {
+ .firmware_revision = 0x002800,
+ .workarounds = SBP2_WORKAROUND_INQUIRY_36 |
+ SBP2_WORKAROUND_MODE_SENSE_8,
+ },
+ /* Initio bridges, actually only needed for some older ones */ {
+ .firmware_revision = 0x000200,
+ .workarounds = SBP2_WORKAROUND_INQUIRY_36,
+ },
+ /* Symbios bridge */ {
+ .firmware_revision = 0xa0b800,
+ .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS,
+ }
};
/**************************************
struct csr1212_dentry *dentry;
u64 management_agent_addr;
u32 command_set_spec_id, command_set, unit_characteristics,
- firmware_revision, workarounds;
+ firmware_revision;
+ unsigned workarounds;
int i;
SBP2_DEBUG_ENTER();
case SBP2_FIRMWARE_REVISION_KEY:
/* Firmware revision */
firmware_revision = kv->value.immediate;
- if (force_inquiry_hack)
- SBP2_INFO("sbp2_firmware_revision = %x",
- (unsigned int)firmware_revision);
- else
- SBP2_DEBUG("sbp2_firmware_revision = %x",
- (unsigned int)firmware_revision);
+ SBP2_DEBUG("sbp2_firmware_revision = %x",
+ (unsigned int)firmware_revision);
break;
default:
}
}
- /* This is the start of our broken device checking. We try to hack
- * around oddities and known defects. */
- workarounds = 0x0;
+ workarounds = sbp2_default_workarounds;
+ if (force_inquiry_hack) {
+ SBP2_WARN("force_inquiry_hack is deprecated. "
+ "Use parameter 'workarounds' instead.");
+ workarounds |= SBP2_WORKAROUND_INQUIRY_36;
+ }
- /* If the vendor id is 0xa0b8 (Symbios vendor id), then we have a
- * bridge with 128KB max transfer size limitation. For sanity, we
- * only voice this when the current max_sectors setting
- * exceeds the 128k limit. By default, that is not the case.
- *
- * It would be really nice if we could detect this before the scsi
- * host gets initialized. That way we can down-force the
- * max_sectors to account for it. That is not currently
- * possible. */
- if ((firmware_revision & 0xffff00) ==
- SBP2_128KB_BROKEN_FIRMWARE &&
- (max_sectors * 512) > (128*1024)) {
- SBP2_WARN("Node " NODE_BUS_FMT ": Bridge only supports 128KB max transfer size.",
- NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid));
- SBP2_WARN("WARNING: Current max_sectors setting is larger than 128KB (%d sectors)!",
- max_sectors);
- workarounds |= SBP2_BREAKAGE_128K_MAX_TRANSFER;
- }
-
- /* Check for a blacklisted set of devices that require us to force
- * a 36 byte host inquiry. This can be overriden as a module param
- * (to force all hosts). */
- for (i = 0; i < ARRAY_SIZE(sbp2_broken_inquiry_list); i++) {
- if ((firmware_revision & 0xffff00) ==
- sbp2_broken_inquiry_list[i]) {
- SBP2_WARN("Node " NODE_BUS_FMT ": Using 36byte inquiry workaround",
- NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid));
- workarounds |= SBP2_BREAKAGE_INQUIRY_HACK;
- break; /* No need to continue. */
- }
+ for (i = 0; i < ARRAY_SIZE(sbp2_workarounds_table); i++) {
+ if (sbp2_workarounds_table[i].firmware_revision !=
+ (firmware_revision & 0xffff00))
+ continue;
+ workarounds |= sbp2_workarounds_table[i].workarounds;
+ break;
}
+ if (workarounds)
+ SBP2_INFO("Workarounds for node " NODE_BUS_FMT ": "
+ "0x%x (firmware_revision 0x%x)",
+ NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid),
+ workarounds, firmware_revision);
+
+ /* We would need one SCSI host template for each target to adjust
+ * max_sectors on the fly, therefore warn only. */
+ if (workarounds & SBP2_WORKAROUND_128K_MAX_TRANS &&
+ (max_sectors * 512) > (128 * 1024))
+ SBP2_WARN("Node " NODE_BUS_FMT ": Bridge only supports 128KB "
+ "max transfer size. WARNING: Current max_sectors "
+ "setting is larger than 128KB (%d sectors)",
+ NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid),
+ max_sectors);
+
/* If this is a logical unit directory entry, process the parent
* to get the values. */
if (ud->flags & UNIT_DIRECTORY_LUN_DIRECTORY) {
scsi_id->sdev = sdev;
- if (force_inquiry_hack ||
- scsi_id->workarounds & SBP2_BREAKAGE_INQUIRY_HACK) {
+ if (scsi_id->workarounds & SBP2_WORKAROUND_INQUIRY_36)
sdev->inquiry_len = 36;
- sdev->skip_ms_page_8 = 1;
- }
return 0;
}
static int sbp2scsi_slave_configure(struct scsi_device *sdev)
{
+ struct scsi_id_instance_data *scsi_id =
+ (struct scsi_id_instance_data *)sdev->host->hostdata[0];
+
blk_queue_dma_alignment(sdev->request_queue, (512 - 1));
sdev->use_10_for_rw = 1;
sdev->use_10_for_ms = 1;
+
+ if (sdev->type == TYPE_DISK &&
+ scsi_id->workarounds & SBP2_WORKAROUND_MODE_SENSE_8)
+ sdev->skip_ms_page_8 = 1;
return 0;
}
scsi_driver_template.cmd_per_lun = 1;
}
- /* Set max sectors (module load option). Default is 255 sectors. */
+ if (sbp2_default_workarounds & SBP2_WORKAROUND_128K_MAX_TRANS &&
+ (max_sectors * 512) > (128 * 1024))
+ max_sectors = 128 * 1024 / 512;
scsi_driver_template.max_sectors = max_sectors;
/* Register our high level driver with 1394 stack */
projects / users / hch / xfs.git / commitdiff