]> www.infradead.org Git - linux.git/commitdiff
platform/x86/intel-uncore-freq: Add efficiency latency control to sysfs interface
authorTero Kristo <tero.kristo@linux.intel.com>
Wed, 28 Aug 2024 15:34:55 +0000 (18:34 +0300)
committerHans de Goede <hdegoede@redhat.com>
Wed, 4 Sep 2024 18:17:31 +0000 (20:17 +0200)
Add the TPMI efficiency latency control fields to the sysfs interface.
The sysfs files are mapped to the TPMI uncore driver via the registered
uncore_read and uncore_write driver callbacks. These fields are not
populated on older non TPMI hardware.

Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240828153657.1296410-4-tero.kristo@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
drivers/platform/x86/intel/uncore-frequency/uncore-frequency-common.c
drivers/platform/x86/intel/uncore-frequency/uncore-frequency-common.h

index 4e880585cbe4d0c552a4f1854348c903d6f6b0f6..e22b683a7a434c7eddfe608d092a8450f5322689 100644 (file)
@@ -60,11 +60,16 @@ static ssize_t show_attr(struct uncore_data *data, char *buf, enum uncore_index
 static ssize_t store_attr(struct uncore_data *data, const char *buf, ssize_t count,
                          enum uncore_index index)
 {
-       unsigned int input;
+       unsigned int input = 0;
        int ret;
 
-       if (kstrtouint(buf, 10, &input))
-               return -EINVAL;
+       if (index == UNCORE_INDEX_EFF_LAT_CTRL_HIGH_THRESHOLD_ENABLE) {
+               if (kstrtobool(buf, (bool *)&input))
+                       return -EINVAL;
+       } else {
+               if (kstrtouint(buf, 10, &input))
+                       return -EINVAL;
+       }
 
        mutex_lock(&uncore_lock);
        ret = uncore_write(data, input, index);
@@ -103,6 +108,18 @@ show_uncore_attr(max_freq_khz, UNCORE_INDEX_MAX_FREQ);
 
 show_uncore_attr(current_freq_khz, UNCORE_INDEX_CURRENT_FREQ);
 
+store_uncore_attr(elc_low_threshold_percent, UNCORE_INDEX_EFF_LAT_CTRL_LOW_THRESHOLD);
+store_uncore_attr(elc_high_threshold_percent, UNCORE_INDEX_EFF_LAT_CTRL_HIGH_THRESHOLD);
+store_uncore_attr(elc_high_threshold_enable,
+                 UNCORE_INDEX_EFF_LAT_CTRL_HIGH_THRESHOLD_ENABLE);
+store_uncore_attr(elc_floor_freq_khz, UNCORE_INDEX_EFF_LAT_CTRL_FREQ);
+
+show_uncore_attr(elc_low_threshold_percent, UNCORE_INDEX_EFF_LAT_CTRL_LOW_THRESHOLD);
+show_uncore_attr(elc_high_threshold_percent, UNCORE_INDEX_EFF_LAT_CTRL_HIGH_THRESHOLD);
+show_uncore_attr(elc_high_threshold_enable,
+                UNCORE_INDEX_EFF_LAT_CTRL_HIGH_THRESHOLD_ENABLE);
+show_uncore_attr(elc_floor_freq_khz, UNCORE_INDEX_EFF_LAT_CTRL_FREQ);
+
 #define show_uncore_data(member_name)                                  \
        static ssize_t show_##member_name(struct kobject *kobj, \
                                           struct kobj_attribute *attr, char *buf)\
@@ -146,7 +163,8 @@ show_uncore_data(initial_max_freq_khz);
 
 static int create_attr_group(struct uncore_data *data, char *name)
 {
-       int ret, freq, index = 0;
+       int ret, index = 0;
+       unsigned int val;
 
        init_attribute_rw(max_freq_khz);
        init_attribute_rw(min_freq_khz);
@@ -168,10 +186,24 @@ static int create_attr_group(struct uncore_data *data, char *name)
        data->uncore_attrs[index++] = &data->initial_min_freq_khz_kobj_attr.attr;
        data->uncore_attrs[index++] = &data->initial_max_freq_khz_kobj_attr.attr;
 
-       ret = uncore_read(data, &freq, UNCORE_INDEX_CURRENT_FREQ);
+       ret = uncore_read(data, &val, UNCORE_INDEX_CURRENT_FREQ);
        if (!ret)
                data->uncore_attrs[index++] = &data->current_freq_khz_kobj_attr.attr;
 
+       ret = uncore_read(data, &val, UNCORE_INDEX_EFF_LAT_CTRL_LOW_THRESHOLD);
+       if (!ret) {
+               init_attribute_rw(elc_low_threshold_percent);
+               init_attribute_rw(elc_high_threshold_percent);
+               init_attribute_rw(elc_high_threshold_enable);
+               init_attribute_rw(elc_floor_freq_khz);
+
+               data->uncore_attrs[index++] = &data->elc_low_threshold_percent_kobj_attr.attr;
+               data->uncore_attrs[index++] = &data->elc_high_threshold_percent_kobj_attr.attr;
+               data->uncore_attrs[index++] =
+                       &data->elc_high_threshold_enable_kobj_attr.attr;
+               data->uncore_attrs[index++] = &data->elc_floor_freq_khz_kobj_attr.attr;
+       }
+
        data->uncore_attrs[index] = NULL;
 
        data->uncore_attr_group.name = name;
index b5c7311bfa05845ff305362350a06afd0e4a8944..26c854cd5d97fd74c9ca2be7716006c719399d50 100644 (file)
  * @domain_id_kobj_attr: Storage for kobject attribute domain_id
  * @fabric_cluster_id_kobj_attr: Storage for kobject attribute fabric_cluster_id
  * @package_id_kobj_attr: Storage for kobject attribute package_id
+ * @elc_low_threshold_percent_kobj_attr:
+               Storage for kobject attribute elc_low_threshold_percent
+ * @elc_high_threshold_percent_kobj_attr:
+               Storage for kobject attribute elc_high_threshold_percent
+ * @elc_high_threshold_enable_kobj_attr:
+               Storage for kobject attribute elc_high_threshold_enable
+ * @elc_floor_freq_khz_kobj_attr: Storage for kobject attribute elc_floor_freq_khz
  * @uncore_attrs:      Attribute storage for group creation
  *
  * This structure is used to encapsulate all data related to uncore sysfs
@@ -61,7 +68,11 @@ struct uncore_data {
        struct kobj_attribute domain_id_kobj_attr;
        struct kobj_attribute fabric_cluster_id_kobj_attr;
        struct kobj_attribute package_id_kobj_attr;
-       struct attribute *uncore_attrs[9];
+       struct kobj_attribute elc_low_threshold_percent_kobj_attr;
+       struct kobj_attribute elc_high_threshold_percent_kobj_attr;
+       struct kobj_attribute elc_high_threshold_enable_kobj_attr;
+       struct kobj_attribute elc_floor_freq_khz_kobj_attr;
+       struct attribute *uncore_attrs[13];
 };
 
 #define UNCORE_DOMAIN_ID_INVALID       -1